Festool TDK 12 & TDK 15.6 Cordless Drill / Screwdriver

GENERAL SAFETY RULES

WARNING Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS

Work area

1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
2. Do not operate tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Tools create sparks which may ignite the dust or fumes.
3. Keep bystanders, children, and visitors away while operating a tool. Distractions can cause you to lose control.

Electrical safety

4. A battery operated tool with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery. A charger that may be suitable for one type of battery may create a risk of fire or electric shock when used with another battery.
5. Use battery operated tool only with specifically designated battery pack. Use of any other batteries may create a risk of fire.

Personal safety

6. Stay alert, watch what you are doing and use common sense when operating a tool. Do not use while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating tools may result in serious personal injury.
7. Dress properly. Do not wear loose clothing or jewellery. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewellery, or long hair can be caught in moving parts.
8. Avoid accidental starting. Ensure switch is in the off position before plugging in or inserting battery pack. Carrying tools with your finger on the switch or energising tools that have the switch on invites accidents.
9. Remove adjusting keys or wrenches before turning the tool on. A wrench or key that is left attached to a rotating part of the tool may result in personal injury.
10. Do not overreach. Stand on both feet and keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.
11. Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.
12. If devices are provided for the connection of dust extraction and collection facilities ensure these are connected and properly used. Use of these devices can reduce dust related hazards.

Tool use and care

13. Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.
14. Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.
15. Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired.
16. Disconnect battery pack from tool before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.
17. Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.
18. When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns, or a fire.
19. Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools, with sharp cutting edges are less likely to bind and are easier to control.
20. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tools operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.
21. Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool, may become hazardous when used on another tool.

Service

22. Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.
23. When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorised parts or failure to follow Maintenance instructions may create a risk of electric shock or injury.

WARNING Various dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber. The risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

Technical data

• Google Docs
• Google Drive
• Download [pdf]



File Info : application/pdf, 20 Pages, 172.11KB

Document Document

Related Documents

	Festool TXS 12 2.5-Plus 12V Cordless Drill: Compact Power and Versatility Discover the Festool TXS 12 2.5-Plus, a compact and powerful 12V cordless drill. Featuring a T-shape design, FastFix system, brushless EC-TEC motor, and included Systainer³, it's ideal for various assembly tasks.
	Festool CXS 12 & TXS 12 Cordless Drill/Screwdriver Manual Official operating instructions and safety information for the Festool CXS 12 and TXS 12 cordless drill/screwdrivers. Learn about features, usage, maintenance, and safety precautions.
	Festool SYS-PST 1500 Li HP Power Station Declaration of Conformity Declaration of Conformity for the Festool SYS-PST 1500 Li HP Power Station, detailing compliance with EU and UK regulations and standards.
	Festool CXS 18 TXS 18 Cordless Drill/Screwdriver: Original Operating Instructions This document provides original operating instructions and safety information for the Festool CXS 18 and TXS 18 cordless drill/screwdrivers, covering intended use, technical specifications, and maintenance.
	Festool CT 15 & CT 25 Mobile Dust Extractors - User Manual Comprehensive user manual for Festool CT 15 and CT 25 mobile dust extractors. Includes safety instructions, device components, technical specifications, and operating procedures for efficient and safe use.
	Festool CT 15 E & CT 25 E Mobile Dust Extractors: Operating Manual Comprehensive operating manual for Festool CT 15 E and CT 25 E mobile dust extractors. Learn about safety, technical specifications, operation, maintenance, and intended use for professional and commercial applications.
	Festool BHC 18 Cordless Rotary Hammer Overview An overview of the Festool BHC 18 cordless rotary hammer, featuring its model name, brand, and website. Includes a textual description of the product image.
	Festool Lithium-Ion Battery BP18, BP 12, BP-XS 12 Safety Data Sheet Comprehensive safety data sheet for Festool Lithium-Ion Batteries (BP18, BP 12, BP-XS 12) detailing product identification, hazards, composition, first aid, fire-fighting, handling, storage, exposure controls, physical/chemical properties, stability, toxicology, environmental information, disposal, and transport regulations.