ASUS RT-AX57 Wi-Fi Router Quick Start Guide

Hardware Overview

Power Button: Turns the router on or off.

Reset Button: Resets the router to factory defaults.

WPS Button: Wi-Fi Protected Setup button.

WAN Port (Internet): Connects to your modem.

LAN Ports 1-4: Connect wired devices.

Power Jack: Connects to the power adapter.

LED Indicators: Show the status of Power, 2.4GHz, 5GHz, WAN, and LAN connections.

Power Adapter: DC Output: 12V (1.5A).

Operating Temperature: 0-40°C

Operating Humidity: 50-90%

Storage Temperature: 0-70°C

Storage Humidity: 20-90%

Steps for Single Router Setup

01 Prepare Your Modem

1. Unplug the power cable from your modem. If your modem has a battery backup, remove it.
2. Connect your modem to the router's WAN port using the provided network cable.
3. Turn on your modem. Plug the modem into a power outlet and turn it on.
4. Check your modem's lights to ensure the connection is established.

Note: If you use DSL for internet access, you will need the username and password provided by your Internet Service Provider (ISP) to configure your router.

02 Install Your Router

1. Connect the power adapter to the power port and press the power button. The power LED will illuminate when the hardware is ready.

Configuration Options

Via the ASUS Router App

1. On iOS or Android, open your app store, search for "ASUS Router", and download the app.
2. On iOS or Android, tap Settings > Wi-Fi, then connect to the network named with the default SSID displayed on the label at the back of the router. You can also scan the QR code on the label to connect to the default SSID.
3. Launch the ASUS Router app and follow the on-screen instructions to complete the setup.

Via a Web Browser

1. Wired: Connect your computer to a router LAN port using an additional network cable.
2. Wi-Fi: Connect to the network named with the default SSID displayed on the label at the back of the router (e.g., ASUS_XX, where XX are the last two digits of the MAC address).
3. Open a web browser. You will be automatically redirected to the ASUS setup wizard. If not, navigate to http://www.asusrouter.com.
4. Follow the instructions to complete the configuration.

FAQ and Support

Q1: Where can I find more information about the Wi-Fi router?

• Technical Support Site: https://www.asus.com/support
• Video Tutorials: https://qr.asus.com/wl_videotutorials

Networks Global Hotline Information:

Compliance Information

Innovation, Science and Economic Development Canada (ISED) Statement:

This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

CAN ICES-003(B)/NMB-003(B)

Radio Frequency (RF) Exposure Information:

The radiated output power of the ASUS Wireless Device is below the Innovation, Science and Economic Development Canada radio frequency exposure limits. The ASUS Wireless Device should be used in such a manner that the potential for human contact during normal operation is minimized. This equipment should be installed and operated with a minimum distance of 24cm between the radiator and any part of your body.

This device has been certified for use in Canada. Status of the listing in the Innovation, Science and Economic Development Canada's REL (Radio Equipment List) can be found at: http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h tt00020.html

Additional Canadian information on RF exposure can be found at: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html

This radio transmitter [3568A-RTAX8A00] has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated.

The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit.

The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate.

Federal Communications Commission (FCC) Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Prohibition of Co-location: This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. For indoor use only.

Safety Notices

• Use this product in environments with ambient temperatures between 0°C (32°F) and 40°C (104°F).
• Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating.
• DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.
• DO NOT place or drop objects on top and do not shove any foreign objects into the product.
• DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.
• DO NOT cover the vents on the product to prevent the system from getting overheated.
• DO NOT use damaged power cords, accessories, or other peripherals.
• If the Adapter is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
• DO NOT mount this equipment higher than 2 meters.

ASUS Recycling/Takeback Services

ASUS recycling and takeback programs are part of a commitment to environmental protection. For detailed recycling information in different regions, please visit: http://csr.asus.com/english/Takeback.htm

REACH

In compliance with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, chemical substances in ASUS products are published at: http://csr.asus.com/english/REACH.htm