ASUS RT-AX86U Pro Quick Start Guide

Hardware Overview

I/O Ports

DCIN port

Power input.

USB 3.2 Gen 1 port

High-speed USB connection.

LED on/off button

Controls LED indicator lights.

Power switch

Turns the router on/off.

USB 2.0 port

Standard USB connection.

LAN ports 1-4

Ethernet ports for wired connections.

Reset button

Resets the router to factory defaults.

WAN port

Connects to your modem for internet access.

2.5G port

High-speed 2.5 Gigabit WAN port.

WPS button

Wi-Fi Protected Setup button.

LED Lights

• WAN: Indicates WAN connection status.
• 2.5G: Indicates 2.5G port status.
• 2.4GHz: Indicates 2.4GHz Wi-Fi status.
• 5GHz: Indicates 5GHz Wi-Fi status.
• POWER: Indicates router power status.

Specifications

Model: RT-AX86U Pro, Wireless-AX5700 Dual-band Gigabit Router

DC Power Adapter:

• DC Output: +12V with 3.0A current
• DC Output: +19.5V with 2.31A current

Operating Temperature: 0~40°C

Storage Temperature: 0~70°C

Operating Humidity: 50~90%

Storage Humidity: 20~90%

One Router Setup Steps

Follow these steps for initial setup:

1. Prepare your Modem

   Step 1: Unplug the power cable from your cable/DSL modem. If it has a battery backup, remove the battery.

   Step 2: Connect your modem to the WAN port on the back of the router using the provided network cable.

   Step 3: Power on the modem by plugging it into a power outlet. Check the modem's LED lights to ensure the connection is active.

2. Install your Router

   Step 1: Plug the power adapter into the DCIN port on the router and press the Power switch.

   Step 2: The power LED will light up, indicating the hardware is ready.

   Note for DSL users: You will need your username and password from your Internet Service Provider (ISP) to properly configure your router.

Connecting to the Network

Choose one of the following methods:

Via ASUS Router App

1. On your iOS or Android mobile device, go to the app store, search for "ASUS Router", and download the app.
2. Connect your mobile device to the router's default network SSID (e.g., "ASUS_XX", found on the product label) via Wi-Fi settings. Alternatively, scan the QR code on the product label to connect.
3. Launch the ASUS Router App and follow the on-screen instructions to complete the setup.

Or via Web Browser

1. Connect your PC to one of the router's LAN ports using an additional network cable.
2. Alternatively, connect your device wirelessly to the default SSID (e.g., "ASUS_XX") shown on the product label.
3. Open a web browser. You will typically be redirected to the ASUS Setup Wizard. If not, manually navigate to http://router.asus.com.
4. Follow the instructions in the setup wizard to complete the configuration.

2.5G Port WAN Type Setup Steps

Configure your router to use the 2.5G WAN port:

1. Prepare your Router

   Connect your modem to the 2.5G port on the router using a network cable.

2. Login and Connect

   Step 1: In the ASUS Setup Wizard, select "manual setting".

   Step 2: Select "2.5G Ethernet" and follow the prompts to complete the setup of your Wi-Fi name (SSID) and login credentials.

Switching to 2.5G WAN

If you previously used a 1G WAN port, follow these steps:

1. Step 1: Access the router's web interface. Navigate to the Dashboard and open the "WAN" settings.
2. Step 2: Choose "2.5G WAN" as the primary WAN connection and apply the changes.

Start to Use

After completing the setup steps, the router will reboot briefly and establish an internet connection via the 2.5G port. The 2.5G LED will turn white when connected.

Frequently Asked Questions (FAQ)

Q1: Where can I find more information about the wireless router?

You can find comprehensive support and documentation on the official ASUS technical support site: https://www.asus.com/support.

Service and Support

Video Tutorials: Access helpful video guides at https://qr.asus.com/wl_videotutorials.

Recycling and Takeback Services: ASUS is committed to environmental protection. Find detailed recycling information for your region at http://csr.asus.com/english/Takeback.htm.

REACH Compliance: Information on chemical substances in ASUS products is available at http://csr.asus.com/english/REACH.htm.

Regulatory Information

Federal Communications Commission (FCC) Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with instructions, it may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, users are encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Prohibition of Co-location: This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits for an uncontrolled environment. End users must follow specific operating instructions for RF exposure compliance. This device is restricted for indoor use.

WARNING: This equipment must be installed and operated in accordance with provided instructions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 51cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device is restricted for indoor use.

Compliance Statement of Innovation, Science and Economic Development Canada (ISED):

This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Operation in the 5150-5250 MHz band is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. CAN ICES-003(B)/NMB-003(B).

Radio Frequency (RF) Exposure Information: The radiated output power of the ASUS Wireless Device is below the Innovation, Science and Economic Development Canada radio frequency exposure limits. The ASUS Wireless Device should be used to minimize human contact during normal operation. This equipment should be installed and operated with a minimum distance of 31cm between the radiator and any part of your body. This device has been certified for use in Canada. Status of the listing in the Innovation, Science and Economic Development Canada's REL (Radio Equipment List) can be found at: http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html. Additional Canadian information on RF exposure can be found at: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html.

French Translation (ISED): Le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. La bande 5150-5250 MHz est réservée uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux. CAN ICES-003(B)/NMB-003(B).

French Translation (RF Exposure): La puissance de sortie émise par cet appareil sans fil est inférieure à la limite d'exposition aux fréquences radio d'Innovation, Sciences et Développement économique du Canada (ISED). Utilisez l'appareil sans fil de façon à minimiser les contacts humains lors d'un fonctionnement normal. Cet équipement doit être installé et utilisé avec un minimum de 31cm de distance entre la source de rayonnement et votre corps. L'utilisation de cet appareil est autorisée au Canada. Pour consulter l'entrée correspondant à l'appareil dans la liste d'équipement radio (REL - Radio Equipment List) d'Innovation, Sciences et Développement économique du Canada, rendez-vous sur : http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html. Pour des informations supplémentaires concernant l'exposition aux fréquences radio au Canada, rendez-vous sur : https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html.

Antenna Specifications:

Note: Maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit. Maximum antenna gain for the band 5725-5850 MHz shall comply with e.i.r.p. limits for point-to-point and non-point-to-point operation.

Indoor Use Only: This device is intended for indoor use only.

Safety Notices:

• Use this product in environments with ambient temperatures between 0°C (32°F) and 40°C (104°F).
• Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating.
• DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.
• DO NOT place or drop objects on top and do not shove any foreign objects into the product.
• DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.
• DO NOT cover the vents on the product to prevent the system from overheating.
• DO NOT use damaged power cords, accessories, or other peripherals.
• If the Adapter is broken, do not try to fix it yourself. Contact a qualified service technician or your retailer.
• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
• DO NOT mount this equipment higher than 2 meters.

French Safety Notices: Utilisez ce produit dans un environnement dont la température ambiante est comprise entre 0°C (32°F) et 40°C (104°F). Référez-vous à l'étiquette située au dessous du produit pour vérifier que l'adaptateur secteur répond aux exigences de tension. NE PAS placer sur une surface irrégulière ou instable. Contactez le service après-vente si le châssis a été endommagé. NE PAS placer, faire tomber ou insérer d'objets sur/dans le produit. NE PAS exposer l'appareil à la pluie ou à l'humidité, tenez-le à distance des liquides. NE PAS utiliser le modem lors d'un orage. NE PAS bloquer les ouvertures destinées à la ventilation du système pour éviter que celui-ci ne surchauffe. NE PAS utiliser de cordons d'alimentation, d'accessoires ou autres périphériques endommagés. Si l'adaptateur est endommagé, n'essayez pas de le réparer vous-même. Contactez un technicien électrique qualifié ou votre revendeur. Pour éviter tout risque de choc électrique, débranchez le câble d'alimentation de la prise électrique avant de toucher au système. Ne placez pas cet appareil à une hauteur supérieure à 2 mètres.

Spanish Safety Notices: Use este producto en entornos sometidos a una temperatura ambiente comprendida entre 0°C (32°F) y 40°C (104°F). Consulte la etiqueta de valores nominales situada en la parte inferior del producto y asegúrese de que su adaptador de alimentación cumple con dichos valores. NO coloque el equipo sobre una superficie irregular o inestable. Solicite asistencia técnica si la carcasa resulta dañada. NO coloque ni deje caer objetos en la parte superior del producto y no introduzca objetos extraños dentro de él. NO exponga el equipo a líquidos, lluvia o humedad, ni lo use cerca de ninguno de tales elementos. NO use el módem durante tormentas eléctricas. Para evitar que el sistema se sobrecaliente, no cubra las ranuras de ventilación del producto. NO cubra los orificios de ventilación del equipo de sobremesa para evitar que el sistema se caliente en exceso. No intente reparar la fuente de alimentación personalmente si se avería. Póngase en contacto con un técnico de mantenimiento autorizado o con su distribuidor. A fin de evitar posibles descargas eléctricas, desconecte el cable de alimentación de la toma de suministro eléctrico antes de cambiar la posición del sistema. NO monte este equipo a una altura superior a 2 metros.