ASUS Quick Start Guide

Hardware Explanations

I/O Ports Overview

• DCIN port
• USB 3.2 Gen1 port
• WAN port
• Reset button
• Power button
• LAN ports 1-4
• WPS button

LED Lights Overview

• WAN
• LAN
• 5GHz
• 2.4GHz
• POWER

Specifications

One Router Setup Steps

01 Prepare your Modem

Step 1: Unplug Modem

Unplug the power of cable/DSL modem. If it has a battery backup, remove the battery.

Step 2: Connect Modem to Router

Connect your modem to the WAN port at the back side of the router using the provided network cable.

Step 3: Power On Modem

Plug the modem into the power outlet and power it on.

Step 4: Check Modem LEDs

Check the modem LED lights to ensure the connection is active.

02 Install your Router

Step 1: Connect Power

Plug the adapter into the DCIN port and press the Power switch.

Step 2: Power On Router

The power LED will light up when the hardware is ready.

If you are using DSL for internet, you will need your username/password from your Internet Service Provider (ISP) to properly configure your router.

Setup Method: Via App

Step 3: Download ASUS Router App

On your iOS or Android mobile device, go to the app store, search for ASUS Router, and download the app.

Step 4: Connect to Router's Wi-Fi

On your mobile device, tap Settings > Wi-Fi, connect to the default network SSID shown on the product label on the back of the router (e.g., ASUS_XX, where XX are the last two digits of the MAC address). Alternatively, scan the QR code on the product label to connect to the default network SSID.

Step 5: Complete Setup with App

Launch the ASUS Router App and follow the on-screen instructions to complete the setup.

Setup Method: Via Web Browser

Step 3: Connect to Router

Wired Connection: Connect your PC to a LAN port at the back of the router using an additional network cable.

Wireless Connection: Connect to the network with the default SSID shown on the product label on the back of your router (e.g., ASUS_XX).

Step 4: Launch Setup Wizard

Open a web browser. You will be redirected to the ASUS Setup Wizard. If not, navigate to http://router.asus.com. Follow the instructions to complete the setup.

Frequently Asked Questions (FAQ)

Q1: Where can I find more information about the wireless router?

• Online FAQ site: https://www.asus.com/support/
• Technical support site: https://www.asus.com/support/
• Customer hotline: Refer to the "Networks Global Hotline Information" section in this Quick Start Guide.
• User manual: Available online at https://www.asus.com/support/

Networks Global Hotline Information

Notes

• UK support e-mail: network_support_uk@asus.com
• For more information, visit the ASUS support site at: https://www.asus.com/support/

Environmental and Regulatory Information

ASUS Recycling/Takeback Services

ASUS is committed to environmental protection through its recycling and takeback programs. For detailed recycling information in different regions, please visit http://csr.asus.com/english/Takeback.htm.

REACH Compliance

In compliance with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, chemical substances in ASUS products are published on the ASUS REACH website at http://csr.asus.com/english/REACH.htm.

Federal Communications Commission (FCC) Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, users are encouraged to try to correct the interference by reorienting or relocating the receiving antenna, increasing the separation between equipment and receiver, connecting the equipment to an outlet on a different circuit, or consulting a dealer or experienced radio/TV technician.

WARNING:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Prohibition of Co-location

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

Radio Frequency (RF) Exposure Information (FCC)

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This device is restricted for indoor use. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25cm from all persons.

Innovation, Science and Economic Development Canada (ISED) Compliance

This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation. Operation in the 5150–5250 MHz band is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. CAN ICES-003(B)/NMB-003(B).

Radio Frequency (RF) Exposure Information (ISED)

The radiated output power of this wireless device is below the Innovation, Science and Economic Development Canada radio frequency exposure limits. The device should be used in a manner that minimizes the potential for human contact during normal operation. This equipment should be installed and operated with a minimum distance of 30cm between the radiator and any part of your body. This device has been certified for use in Canada. Status can be found at: http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html. Additional information: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html.

Antenna Specifications

The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit. The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation.

For indoor use only.

Safety Notices

• Use this product in environments with ambient temperatures between 0°C (32°F) and 40°C (104°F).
• Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating.
• DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.
• DO NOT place or drop objects on top and do not shove any foreign objects into the product.
• DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.
• DO NOT cover the vents on the product to prevent the system from getting overheated.
• DO NOT use damaged power cords, accessories, or other peripherals.
• If the Adapter is broken, do not try to fix it yourself. Contact a qualified service technician or your retailer.
• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
• DO NOT mount this equipment higher than 2 meters.