Kasa Spot Pan Tilt, 24/7 Recording KC115 User Guide

About This Guide

This guide provides a brief introduction to the Kasa Spot Pan Tilt and the Kasa Smart app, as well as regulatory information. Features available in Kasa Smart may vary by model and software version. Kasa Smart availability may also vary by region or ISP. All images, steps, and descriptions in this guide are only examples and may not reflect your actual Kasa Smart experience.

Conventions

More Info

• Specifications can be found on the product page at https://www.tp-link.com.
• Technical Support and troubleshooting information can be found at https://www.tp-link.com/support/.
• A TP-Link Community is provided for discussions at https://community.tp-link.com.
• Frequently Asked Questions (FAQs) can be found at https://www.tp-link.com/support/faq/.

Introduction

The Kasa Spot Pan Tilt connects to your home network, offering a full view of any space with its 360° horizontal and 113° vertical view. Features like Motion Tracking and Patrol Mode allow for continuous activity monitoring and setting distinct viewpoints.

Key Features:

• Crystal Clear Video: Sharp and clear 1080p Full HD provides high-quality video.
• Pan and Tilt: Swipe up, down, left, and right on your phone to rotate the camera.
• Motion Tracking: Automatically tracks and follows detected motion.
• Cloud Storage Plans: Upgrade to Kasa Care for video recordings up to 30 days.
• Patrol Mode: Set up to 4 distinct viewpoints for automated monitoring at intervals.
• Night Vision: Provides clear video up to 30 feet in the dark.
• Instant Activity Alerts: Receive automatic alerts when motion is detected.
• Two-Way Audio: Communicate through the camera using crisp two-way audio.
• Activity Zones: Create up to 16 custom activity zones for targeted alerts.
• 24/7 Recording: Supports continuous video recording with an inserted SD card.

Appearance

The Kasa Spot Pan Tilt features a system LED, a lens, microphone, speaker, micro USB port, an SD card slot, and a RESET button. Refer to the details below:

System LED Status:

• Solid amber: Rebooting
• Alternating amber and green: Ready for setup
• Flashing red: Connecting to Wi-Fi
• Flashing green: Connected to Wi-Fi
• Solid green: Bound to Cloud
• Flashing amber: Resetting to SoftAP/Factory mode

Components:

• Microphone: Built-in internal microphone. Note: Do NOT insert objects into the hole.
• Speaker: The sound comes out of the camera.
• Micro USB Port: Connect the power cord provided.
• Micro SD Slot: Insert a Micro SD card for recording.
• Lens: The camera lens.
• RESET Button: Tilt your camera lens up to find the RESET button.
  • Press and hold for 3 to 15 seconds: Reset to SoftAP mode
  • Press and hold for over 15 seconds: Reset to Factory mode

Set Up Your Camera

Follow the steps below to get started with your new camera.

Step 1. Download Kasa

Get the Kasa Smart app from the Apple App Store or Google Play, or by scanning the QR code below.

Step 2. Log In

Open the app, and log in with your TP-Link ID. If you don't have an account, create one first.

Step 3. Start Setup

Tap the '+' button in the Kasa app and select Cameras > Kasa Spot Pan Tilt.

Step 4. Configure Camera

Follow app instructions to configure your camera and add it to your home network.

Step 5. Place Camera

Place your camera on a flat surface, or install it on a wall or ceiling with the provided indicator label and mounting screws.

• For soft surface: Directly screw the screws in.
• For cement wall: Drill two ⌀6mm holes with the help of the indicator label, insert the plastic expansion tubes into holes, and screw the mounting screws into the expansion tubes.

Main Device Controls

After successfully setting up your camera, you will see the home page and the camera page in the Kasa app.

Home Page

This page lists your cameras and other smart home devices. You can instantly turn on or off the recording function of the camera.

Camera Page

This page lists all your cameras, allowing you to view and manage them easily.

Use Your Camera

Tap a camera in the Kasa app to view and manage it.

View the Live Video

You can view your camera from anywhere at any time. Use Pan/Tilt controls to rotate your camera and monitor every angle of your room.

Change Camera Settings

Adjust camera settings to meet your needs, such as changing the camera name, setting activity notifications, enabling Motion Tracking, and customizing Patrol Mode.

Set Schedules

Create schedules to automatically turn alerts, activity clips, and camera privacy on and off, or customize when to turn Patrol Mode on and off.

Check Local Storage

Save your footage on a Micro SD card and play back with your Kasa Smart App.

Work with Other Smart Home Products

Tap the '+' button on the home page, and add more TP-Link devices or other devices that work with Kasa.

Authentication

COPYRIGHT & TRADEMARKS

Specifications are subject to change without notice. TP-Link is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders.

No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright © 2020 TP-Link Technologies Co., Ltd. All rights reserved.

FCC Compliance Information Statement

Product Name: Kasa Spot Pan Tilt, 24/7 Recording
Model Number: KC115

Responsible Party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc.
Address: 145 South State College Blvd. Suite 400, Brea, CA 92821
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6803
E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. "To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter."

TP-Link USA Corporation has determined that the equipment shown complies with the applicable technical standards, FCC part 15. There is no unauthorized change made in the equipment and it is properly maintained and operated.

Issue Date: 2020-04-21

FCC Compliance Information Statement (AC ADAPTER)

Product Name: AC ADAPTER
Model Number: NBS05B050100VUU

Responsible Party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc.
Address: 145 South State College Blvd. Suite 400, Brea, CA 92821
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6803
E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

TP-Link USA Corporation has determined that the equipment shown complies with the applicable technical standards, FCC part 15. There is no unauthorized change made in the equipment and it is properly maintained and operated.

Issue Date: 2020-04-21

CE Mark Warning & EU Declaration of Conformity

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

OPERATING FREQUENCY (the maximum transmitted power): 2400 MHz -2483.5 MHz(20dBm)

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.

RF Exposure Information

This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body. Restricted to indoor use.

Canadian Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

French Translation: L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
1. l'appareil ne doit pas produire de brouillage;
2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Radiation Exposure Statement & Industry Canada Statement

IC Radiation Exposure Statement

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

French Translation (Déclaration d'exposition aux radiations): Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)

Korea Warning Statements & NCC Notice & BSMI Notice

Korea Warning Statements

당해 무선설비는 운용중 전파혼신 가능성이 있음. (This wireless equipment may cause radio interference during operation.)

NCC Notice & BSMI Notice

NCC Notice: 依據低功率電波輻射性電機管理辦法
第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性或功能。
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通行；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信規定作業之無線電信。低功率射頻電機需忍受合法通信或工業、科學以及醫療用電波輻射性電機設備之干擾。
BSMI Notice: 安全諮詢及注意事項
• 請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。
• 清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。
• 注意防潮，請勿將水或其他液體潑灑到本產品上。
• 插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。
• 請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。
• 請不要私自打開機殼，不要嘗試自行維修本產品，請由授權的專業人士進行此項工作。

English Summary of NCC/BSMI Notices: Regulations for low-power radio frequency devices. Users must not alter frequency, increase power, or change original characteristics without permission. Operation must not interfere with aviation safety or legal communications. If interference occurs, cease operation and improve until interference-free. Low-power radio devices must tolerate interference from legal communications and other industrial/scientific/medical devices. Safety precautions include using original power supplies, unplugging before cleaning, avoiding moisture, ensuring ventilation, keeping away from heat sources, and not attempting self-repair.

Restricted Substances & Safety Information

Restricted Substances Information (Chinese):
限用物質含有情況標示聲明書
產品元件名稱 | 鉛 (Pb) | 鎘 (Cd) | 汞 (Hg) | 六價鉻 (CrVI) | 多溴聯苯 (PBB) | 多溴二苯醚 (PBDE)
PCB | ○ | ○ | ○ | ○ | ○ | ○
外殼 | ○ | ○ | ○ | ○ | ○ | ○
電源供應器 | — | — | — | — | — | —
備考 1. "超出 0.1 wt %" 及 "超出 0.01 wt %" 系指限用物質之百分比含量超出百分比含量基準值。
備考 2. "○" 系指該項限用物質之百分比含量未超出百分比含量基準值。
備考 3. "—" 系指該項限用物質為排除項目。

Ukrainian Certification: Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України. (Product certified according to the rules of the UkrSEPRO system for compliance with the requirements of regulatory documents and requirements stipulated by the current legislative acts of Ukraine.)

Safety Information

• Keep the device away from water, fire, humidity, or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use a damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• Adapter shall be installed near the equipment and shall be easily accessible.

• Use only power supplies provided by the manufacturer and in the original packing of this product. If you have any questions, please contact TP-Link.
• Please read and follow the above safety information when operating the device. TP-Link cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Explanation of the symbols on the product label