TP-Link Kasa Spot User Guide

Contents

• About This Guide
• Introduction
• Appearance
• Insert a microSD Card
• Set Up Your Camera
• Authentication

About This Guide

This guide provides a brief introduction to the Kasa Spot, as well as regulatory information. Features available of this product and in Kasa Smart may vary by model and software version. Kasa Spot and Kasa Smart availability may also vary by region. All images, steps, and descriptions in this guide are only examples and may not reflect your actual experience.

Conventions

In this guide, the following convention is used:

More Info

• Specifications can be found on the product page at https://www.tp-link.com.
• Technical Support and troubleshooting information can be found at https://www.tp-link.com/support.
• Frequently Asked Questions (FAQs) can be found at https://www.tp-link.com/support/faq.

Introduction

With the Kasa Spot connected to your home network, you can see what happens in your home even when you're away. This keeps your home safe and gives yourself a little peace of mind — all while seeing every detail on your phone.

You can set up and use your Kasa Spot alone, or use it together with other smart home devices including plugs, bulbs, switches and more. All these can be achieved on the app.

• Crystal Clear Video: Sharp and clear Full HD provides high-quality video right in the palm of your hand.
• Night Vision: Kasa camera detects activity up to 30 feet away even in total darkness.
• Live View: Keep an eye on what's important to you from anywhere in real time with the Kasa Smart app.
• Secure Local Storage: Save your footage on a microSD card* and play back with your Kasa Smart app. (*microSD card not included.)
• Kasa Care Cloud Storage: Subscribe to a Kasa Care Plan to store your video clips to the cloud for added backup and more beneficial functions. Kasa Care Plans vary in different countries and regions.
• Customizable Activity Zones: Create dynamic activity zones around important areas and receive alerts you care about.
• Crisp Two-Way Audio: Built-in microphone and speaker allow you to carry on a conversation from anywhere with your phone or other supported devices.

Appearance

The Kasa Spot has a system LED that changes color according to its status, a microphone, a speaker, a micro USB port, a micro SD card slot, and a RESET button. Refer below for details. *Images may differ from actual product.

Microphone: Built-in internal microphone. Note: Do NOT insert objects into the hole.

System LED Status:

• Solid amber: Rebooting
• Alternating amber and green: Ready for setup
• Flashing red: Connecting to Wi-Fi
• Flashing green: Connected to Wi-Fi
• Solid green: Bound to Cloud
• Flashing amber: Resetting

microSD Card Slot: Insert a microSD card to save the recorded videos locally.

Speaker: The sound comes out of the camera.

Micro USB Port: Connect the power cord provided.

RESET Button:

• Press and hold for 3 to 15 seconds: Reenable setup mode
• Press and hold for over 15 seconds: Reset to factory default settings

Diagram Description: The camera unit is shown from the front, side, and back. The front view highlights the microphone and the system LED. The side view shows the microSD Card Slot and the RESET Button. The back view indicates the Speaker and the Micro USB Port.

Insert a microSD Card

Kasa provides options for your video recording. You can subscribe to a Kasa Care Plan to store 30-day video clips to the cloud for added backup and more beneficial functions.

Alternatively, you can save footage continuously on a microSD card* and play it back with your Kasa Smart app. The camera will overwrite the oldest files when the microSD card memory is full. See the instructions below to insert a microSD card to your Kasa Spot.

*micro SD card not included.

1. Find the SD card slot on the side panel of your Kasa Spot.
2. Holding the card in the correct orientation, carefully insert the SD card into the slot. Push in the SD card until you hear a clicking sound.

Set Up Your Camera

Follow the steps below to get started with your new camera.

Step 1. Download Kasa

Get the Kasa Smart app from the App Store or Google Play, or by scanning the QR code below.

[App Store download button graphic] [Google Play download button graphic] [QR code graphic]

Step 2. Log In

Open the app, and log in with your TP-Link ID. If you don't have an account, create one first.

[App screenshot showing 'Welcome Home to Kasa' screen with 'Create Account' and 'Log In' buttons]

Step 3. Start Setup

Tap the [app-button-icon] button in the Kasa app and select Kasa Spot.

[App screenshot showing 'Add a Camera' list with 'Kasa Spot' as an option]

Step 4. Configure Camera

Follow app instructions to configure your camera and add it to your home network.

[App screenshot showing camera configuration screen]

Step 5. Place Camera

Place your camera on a flat surface, or install it on a wall or ceiling with the provided indicator label and mounting screws.

• For cement wall: Drill two 6mm holes with the help of the indicator label, insert the plastic expansion tubes into the holes, and screw the mounting screws into the expansion tubes.
• For soft surface: Directly screw the screws in.

Diagram Description: A diagram shows a mounting bracket with dimensions (e.g., ØD, d, T, H) and hole patterns for wall mounting. Another diagram illustrates the camera mounted on a wall.

Authentication and Compliance Information

FCC Compliance Information Statement

Product Name: Kasa Spot Pan Tilt, 24/7 Recording

Model Number: KC105/EC60

Responsible party: TP-Link USA Corporation

Address: 10 Mauchly, Irvine, CA 92618

Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6804

E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. "To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter."

TP-Link USA Corporation has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change made in the equipment, and the equipment is properly maintained and operated.

Issue Date: 2023-09-28

FCC Compliance Information Statement (AC Adapter)

Product Name: AC ADAPTER

Model Number: 3530501354 A8-501000

Responsible party: TP-Link USA Corporation

Address: 10 Mauchly, Irvine, CA 92618

Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6804

E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

CE Mark Warning

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

OPERATING FREQUENCY (the maximum transmitted power): 2400 MHz - 2483.5 MHz (20dBm)

EU Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.

The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/ce/

RF Exposure Information

This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body. Restricted to indoor use.

UKCA Mark

UKCA Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017.

The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca/

Canadian Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:

1. l'appareil ne doit pas produire de brouillage;
2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement.

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Déclaration d'exposition aux radiations:

Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)

Korea Warning Statements:

당해 무선설비는 운용중 전파혼신 가능성이 있음.

NCC Notice & BSMI Notice:

注意!

取得審驗證明之低功率射頻器材,非經核准,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。

低功率射頻器材之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。

RoHS Compliance Information

Safety Advice:

• Use only the original power supply or one that matches the specified power type.
• Unplug the power cord before cleaning. Do not use liquids, spray cleaners, or damp cloths.
• Avoid moisture; do not spill water or other liquids onto the product.
• Do not block or cover vents to ensure reliable operation and prevent overheating.
• Do not place the product near heat sources. Ensure normal ventilation; do not place in enclosed spaces.
• Do not disassemble or attempt to repair the product yourself. Contact the manufacturer or agent for repairs.

Restricted Substances Table

Equipment name: Kasa Spot Pan Tilt, 24/7 Recording

Type designation (Type): KC410S/KC411S

Symbol Explanations:

• Note 1: "Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.
• Note 2: ○ indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
• Note 3: The "-" indicates that the restricted substance corresponds to the exemption.

[Ukrainian product certification statement text]

Safety Information

• Keep the device away from water, fire, humidity, or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact TP-Link.
• Do not use a damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended by TP-Link.
• Do not use the device where wireless devices are not allowed.
• The adapter shall be installed near the equipment and shall be easily accessible.
• Use only power supplies provided by the manufacturer and in the original packing of this product. If you have any questions, please contact TP-Link.
• Operating Temperature: 0°C~40°C (32°F~104°F).

Explanation of Symbols on the Product Label

Note: Symbols may vary from products.