Hama 179037 TV Wall Bracket
Installation and User Manual
Product Specifications
| Specification | Details |
|---|---|
| Maximum Load Capacity | 75 kg |
| Screen Size Compatibility | 117.0 - 229.0 cm (US: 46" - 90") |
| Depth | 2.1 cm |
| Wall Mounting Plate Dimensions | 91.3 x 15.2 cm |
| Mounting Holes | According to VESA standard 800x600 |
Intended Use
This bracket is designed for wall mounting flat-panel displays for private, non-commercial household use. It is intended for indoor use only. Use the bracket exclusively for its intended purpose.
Package Contents
- TV wall bracket
- TV support arms (2x)
- Drilling template
- Cable ties
- Installation kit (see Fig. 1 for contents)
- These operating instructions
Required Tools
The following tools are typically required for installation:
- Screwdriver
- Drill
- Spirit Level
- Wrench (13mm indicated in diagram)
- Stud Finder (indicated in diagram)
Installation Kit Components
The installation kit includes various screws, plugs, and other hardware. Specific components include:
- Screws: (A1) 8x60 (x6), (A2) Ø10x50 (x6), (A3) M8 (x6), (B1) M6 (x4), (B2) Ø8x10 (x4), (B3) Ø8x20 (x4), (C1) M6x12 (x4), (C2) M6x20 (x4), (D1) M8x12 (x4), (D2) M8x20 (x4), (D3) M8x30 (x4), (D4) M8x45 (x4), (E1) M4x12 (x4)*, (E2) M4x20 (x4)*
- Other hardware: (F1) (x4), (F2) (x2), (F3) (x1), (F4) (x1)
- *Note: Items marked with an asterisk (*) are not included.
Installation Steps
⚠️ Warning: Installation should ideally be performed by two people. Always ensure the wall is suitable for the weight and check for hidden pipes or wires before drilling.
Step 1: Prepare the Bracket
Attach the TV support arms to the main wall bracket. (Refer to diagram showing arms being attached to the bracket body).
Step 2: Mark and Drill Wall
Using the drilling template, mark the desired mounting points on the wall. Drill holes of approximately Ø10mm, to a depth of 70mm, as indicated in the diagram.
Step 3: Mount Bracket to Wall
Secure the main wall bracket to the wall using appropriate screws and wall plugs (e.g., A1, A2, A3). Ensure the bracket is level using a spirit level.
Step 4: Attach TV to Bracket
Align the TV support arms with the mounting points on the back of the TV. Secure the TV to the arms using the provided screws (e.g., B1, B2, B3, C1, C2, D1-D4, F1).
Step 5: Secure the TV
Once the TV is mounted, pull down the safety cord to secure the support arms to the wall plate, allowing them to click into place.
Safety Warnings and Notes
General Warnings
- ⚠️ Warning: The supplied mounting kit may not be suitable for all wall types or terminal devices. Purchase appropriate mounting materials from a specialist dealer if necessary.
- ⚠️ Warning: Ensure the wall can support the weight. Check for electrical, water, or gas lines before drilling.
- ⚠️ Warning: Supplied wall plugs are for concrete and solid brick walls only.
- ⚠️ Warning: Never use excessive force during mounting, as this can damage the device or bracket.
- ⚠️ Warning: Do not mount the product where people might linger underneath.
- ⚠️ Warning: Periodically check the bracket's security and stability (at least quarterly).
- ⚠️ Warning: Do not exceed the maximum load capacity (75 kg) or attach loads exceeding maximum dimensions.
- ⚠️ Warning: Avoid asymmetrical loading. Maintain safety clearance around the load.
- ⚠️ Warning: Remove the attached load immediately if the product is damaged and discontinue use.
Important Notes
- ℹ️ Note: Read your terminal device's operating instructions before mounting for suitable fastening materials.
- ℹ️ Note: If in doubt, consult a qualified technician.
- ℹ️ Note: Keep leftover parts and these instructions in a safe place for future use.
- ℹ️ Note: The bracket is not adjustable.
- ℹ️ Note: Clean only with water or standard household cleaners.
Warranty and Support
Warranty
Hama GmbH & Co. KG provides an extended manufacturer's warranty covering freedom from defects, usability, workmanship, and durability for 10 years. This warranty excludes compatibility with future hardware standards. Claims are resolved by repair or replacement at Hama's discretion. The warranty is in addition to statutory rights and does not cover damage from improper use, normal wear, chemicals, force majeure, or unauthorized modifications. Accessories not part of the standard product are also excluded.
Contact Information
For warranty claims or product questions, please contact:
Hama GmbH & Co KG
Dresdner Str. 9
86653 Monheim, Germany
Website: www.hama.com
Hotline: +49 9091 502-115 (German/English)
