NORDVIKEN Chair Assembly Instructions

Parts List

• 4x Screw (128758)
• 2x Screw (10042205)
• 4x Screw (122925)
• 2x Dowel (101357)
• 18x Dowel (101350)
• 1x Allen Key (10083377)
• 4x Plastic Part (122620)

Assembly Steps

1. Step 1: Attach the side frame pieces to the crossbar using four of the plastic parts (122620) and screws (128758). Ensure the parts are aligned correctly.
2. Step 2: Insert dowels (101357) into the designated holes on the seat frame. Attach the backrest supports to the seat frame using dowels (101350).
3. Step 3: Attach the backrest slats to the backrest supports using screws (101350). Use the provided Allen key (10083377) for tightening.
4. Step 4: Turn the partially assembled chair upside down.
5. Step 5: Attach the seat to the frame. Ensure the correct orientation. Use screws (128758) and the Allen key (10083377).
6. Step 6: Secure the seat further by using screws (10042205) and the Allen key (10083377).
7. Step 7: Place the chair upright on a flat surface.
8. Step 8: Attach the remaining plastic parts (122620) to the underside of the seat frame using screws (122925).

Important Notes:

• Ensure all screws are tightened securely but do not overtighten.
• If you encounter difficulties, refer to the diagrams provided in the original documentation or contact IKEA customer support.
• The product is designed for indoor use.