360° Four-Record Driving Recorder
Please read the instruction manual carefully before using this product. The instruction manual is for reference only, and the specific operation shall be subject to the physical object.
1. Product Structure
The device is a four-record driving recorder, featuring a main unit with multiple lenses and various ports and buttons. It also comes with accessories for mounting and connectivity.
Components:
- 1) Lens
- 2) Lens
- 3) Lens
- 4) OK key
- 5) Upper key
- 6) Lower key
- 7) Mode/Menu button
- 8) Power button
- 9) Speaker
- 10) Back pull interface (for external rearview mirror input)
- 11) Charging interface (Type-C)
- 12) TF card slot
- 13) Reset hole (for forced shutdown)
- 14) Mic hole
2. Key and Interface Functions
Power Button
- Press and hold for 2 seconds to turn on/off.
- In power-on state, click to turn off the screen; click again to turn it back on.
OK Key
- Confirmation key.
- Click to record, take photos, play, or pause.
Upper Key
- Navigate upwards in menus.
- In photo/video mode, long press to turn the infrared light on/off.
Lower Key
- Navigate downwards in menus.
- In photo and video mode, click or long press to switch between different lens views.
Mode/Menu Key
- Long press to switch between video, photo, and playback modes.
- Click to access the setting menu.
- While recording, click to lock the current video.
Reset Hole
- Use a pin-like object to poke this hole to force shutdown in case of screen freezing or abnormal operation.
Back Pull Interface
- Connects to an external rearview mirror input.
Charging Interface
- Interface type: Type-C.
- Used to connect an external power supply for charging or powering the device.
- Can connect to a PC for 'storage/camera' operations.
3. Basic Operating Instructions
Power-on and Shutdown
Long press the 'Power button' for 2 seconds to turn the device on or off. The device will automatically start recording when powered on with a memory card inserted.
Video Mode
- Turn on the device by long-pressing the 'Power button' in shutdown state. It enters video recording mode.
- Click the 'OK button' to start recording. Click again to stop recording and save automatically.
- While recording, click the 'Mode/Menu Key' to lock the current video.
- Click the 'Lower key' to switch between camera views.
- Long press the 'Upper key' to turn the infrared light on/off.
- Long press the 'Mode/Menu Key' to switch modes. Click to access submenus and system settings.
- Click the 'Power Key' to turn off the screen; click again to turn it back on.
Photo Mode
- Turn on the device by long-pressing the 'Power button' in shutdown state. If a card is inserted, click 'OK key' to stop recording first. Then, long press the 'Mode/Menu Key' once to enter photo mode.
- Click the 'OK key' to take a photo.
- Click the 'Lower key' to switch camera views.
- Long press the 'Upper key' to turn the infrared light on/off.
- Long press the 'Mode/Menu Key' to switch modes. Click to access submenus and system settings.
- Click the 'Power Key' to turn off the screen; click again to turn it back on.
Playback Mode
- Turn on the device by long-pressing the 'Power button' in shutdown state. If a card is inserted, click 'OK key' to stop recording first. Then, long press the 'Mode/Menu Key' twice to enter playback mode.
- Use the 'Up/Down keys' to switch between files. When playing videos, click to adjust volume up or down.
- Click the 'OK key' to play or pause video files.
- Long press the 'Mode/Menu Key' to switch modes. Click to access submenus and system settings.
- Click the 'Power Key' to turn off the screen; click again to turn it back on.
- Note: Do not insert or remove the memory card while the device is recording, taking photos, or playing back.
USB Mode
Connect the device to a computer using a USB data cable. The device will turn on automatically and display two options: 'Storage/Camera'.
Note: Connecting the rear pull interface will not enter this mode.
- Storage: In this mode, you can access, save, and view video files or photo files.
- Camera: In this mode, the device can be used as a computer webcam.
4. Product Parameters and Specifications
Parameter | Specification |
---|---|
PCB Model | D433-6248-v2 |
Main Controller | GPCV6248 |
Image Sensor | GC0309/GC030/GC2083 |
TFT Display Screen | 2.0 inch Color display (240*320) |
Video Resolution | 1080FHD, 720P |
Video File Format | AVI |
Picture Resolution | 12M, 10M, 8M, 5M, 3M, 2MHD, 1.3M |
Photo Format | JPG |
Loop Recording | Off, 1 minute, 2 minutes, 3 minutes, 5 minutes |
Exposure Compensation | +2.0, +5/3, +4/3, +1.0, +2/3, +1/3, 0.0, -1/3, -2/3, -1.0, -4/3, -5/3, -2.0 |
Mobile Detection | Off, On |
Record Audio | Off, On |
Date Label | Off, On |
Gravity Sensing | Off, 2G, 4G, 8G |
Parking Mode | Off, On |
Date and Time | Customize |
Automatic Shutdown | Off, 1 minute, 3 minutes |
Screen Protector | Off, 3 minutes, 5 minutes, 10 minutes |
Button Sound | Off, On |
Language Settings | English, Traditional Chinese, Simplified Chinese, Turkish, French, German, Vietnamese, Italian, Portuguese, Russian, Spanish, Thai |
Light Source Frequency | 50Hz, 60Hz |
Format | Confirm and cancel |
Default Settings | Confirm and cancel |
Edition | 241118 V1.0 |
Working Humidity | ≤85% |
Working Temperature | -20°C/+65°C |
Power Supply | USB: 5V, Battery: 3.7V |
Standby Current | Battery 3.7V standby 49.5uA |
Power Consumption | ≤2.45W |
Low Power Prompt | 3.60V |
Note: This product reserves the right to change the design and specifications without prior notice.