TECKNET DOORBELL
User Manual - Model: HDB01617
Package Contents
- TECKNET Doorbell Receiver
- TECKNET Kinetic Bell Push
- Double Sided Adhesive Tape
- User Manual
Product Layout
The doorbell system consists of a receiver and a kinetic bell push. The receiver has three buttons: Music button, Volume button, and ON/OFF button.
Important Safety Instructions
Carefully follow these instructions:
- SAVE THESE INSTRUCTIONS - This sheet contains important safety and operating instructions.
- Before using the product, read all instructions and caution markings on the product, accessories, and device using the product.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. [Icon: Restricted use for vulnerable persons]
- Children should be supervised to ensure that they do not play with the appliance.
- Keep the product away from fire or explosion hazards. [Icon: Fire hazard]
- Do not place in or near water, rain, excess moisture, or extreme heat. [Icon: Water/Moisture hazard]
- Do not operate the product with a damaged cord or plug.
- Do not operate the product if it has been damaged in any way.
- Do not disassemble the product. Disassembly may result in a risk of safety hazards.
- Do not throw or shake the product.
- To reduce the risk of electric shock, disconnect the product from the power supply when not in use or switch off the power supply. [Icon: Electrical shock hazard]
Simplified EU Declaration of Conformity
Shenzhen Unichain Technology Co., Ltd. declares that the product type HDB01617 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://eu.tecknetonline.com/
Limited 12-Month Warranty
What this warranty covers: Shenzhen Unichain Technology Co., LTD. (Manufacturer: "Unichain") warrants to the original purchaser of this TECKNET product that the product shall be free of defects in design, assembly, material, or workmanship.
Period of coverage: Unichain warrants the TECKNET product for 12 Months.
Resolution: Unichain will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product).
What is not covered: All above warranties are null and void if the TECKNET product is not provided to Unichain for inspection upon Unichain's request at the sole expense of the purchaser, or if Unichain determines that the TECKNET product has been improperly installed, altered in any way, or tampered with. The TECKNET Product Warranty does not protect against acts of God such as flood, earthquake, lightning, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (e.g. brownouts or sags), non-authorized program, or system equipment modification or alteration.
How to claim: Please contact retailers or visit TECKNET website or email support@tecknetonline.com for more information. To extend the warranty period, please visit TECKNET website and register your TECKNET products within 90 days of purchase.
Disclaimer: Every effort has been made to ensure that the information and procedures in this guide are accurate and complete, no liability can be accepted for any errors or omissions and TECKNET reserves the right to make any changes without further notice to any products mentioned herein.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
This marking [Icon: WEEE symbol] on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
Product Specifications
| Receiver Power Supply | AC 100-240V |
| Receiver Working Power | <0.5W |
| Working Frequency | 433.92MHz ± 0.5MHz |
| Transmission Power | 10dBm |
How to Pair
Note: This device is already paired.
If there are disconnection or short range issues, please follow the instructions below:
- Press and hold the receiver's music button for 3 seconds until the receiver makes a "Ding-Ding" sound.
- Then press the kinetic bell push.
- The receiver will make a "Ding" sound, meaning pairing between the kinetic bell push and receiver is successful.
- The receiver will make another "Ding-Ding" sound to exit the pairing mode.
Transmitter Installation
Apply the double-sided adhesive tape on the back of the transmitter case. Remove the outer side of the tape, attach the transmitter to the location you need, and press hard for 30 seconds.
Maintenance
- In order to protect the precision internal electronic components, it's advisable that unqualified users should not attempt to open the unit for maintenance.
- Do not expose the unit to continuous direct sunlight or humid environment - this will adversely affect the unit.
- Correct use of the product helps to effectively extend the service life of the unit.
