TECKNET HWD01816 Wireless Doorbell
Limited 12-Month Warranty
What this warranty covers: Shenzhen Unichain Technology Co., LTD. (Manufacturer: “Unichain”) warrants to the original purchaser of this TECKNET product that the product shall be free of defects in design, assembly, material, or workmanship.
What the period of coverage is: Unichain warrants the TECKNET product for 12 Months.
What will we do to correct problems: Unichain will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product).
What is not covered by this warranty: All above warranties are null and void if the TECKNET product is not provided to Unichain for inspection upon Unichain’s request at the sole expense of the purchaser, or if Unichain determines that the TECKNET product has been improperly installed, altered in any way, or tampered with. The TECKNET Product Warranty does not protect against acts of God such as flood, earthquake, lightning, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (e.g. brownouts or sags), non-authorized program, or system equipment modification or alteration.
How to claim the warranty: Please contact retailers or visit TECKNET website or email support@eu.tecknetonline.com for more information. To extend the warranty period, please visit TECKNET website and register your TECKNET products within 90 days of purchase.
Disclaimer: Every effort has been made to ensure that the information and procedures in this guide are accurate and complete; no liability can be accepted for any errors or omissions and TECKNET reserves the right to make any changes without further notice to any products mentioned herein.
Package Contents
- 2x TECKNET Doorbell
- 1x Double-Sided Adhesive Tape
- 2x Screws
- 2x Screw-joint Coupling
- 1x User Manual
Product Layout
The product consists of a Transmitter (bell push) and a Receiver (indoor unit).
Transmitter: Features a Music button and a Volume button.
Receiver: Features a music note icon (♪) indicating sound output.
Product Specifications
- Receiver Power Supply: AC 100-240V
- Receiver Working Power: <0.5W
- Working Frequency: 433.92MHZ ±0.5MHZ
- Transmission Power: -12.23dBm
Important Safety Instructions
- SAVE THESE INSTRUCTIONS - This sheet contains important safety and operating instructions.
- Before using the product, read all instructions and caution markings on the product, accessories, and device using the product.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Keep the product away from fire or explosion may occur.
- Do not place the product in or near any inflammable, explosive, or hazardous object.
- Do not place in or near water, rain, excess moisture, or extreme heat.
- Do not operate the product with a damaged cord or plug.
- Do not operate the product if it has been damaged in any way.
- Do not disassemble the product. Disassembly may result in a risk of safety hazards.
- Do not throw or shake the product.
Maintenance
- To protect the precision internal electronic components, it is advisable that unqualified users should not attempt to open the unit for maintenance.
- Do not expose to continuous direct sunlight or humid environment – this will adversely affect the unit.
- Correct use of the products helps to effectively extend the service life of the unit.
Precaution
Do not connect and use the doorbell socket with high-power electrical appliances, such as bread machines, microwave ovens, ice machines, vacuum cleaners, etc.
How to Use
- Music Button: Press the music button once to play the next chime and select the one you like. Press twice to go back to the previous chime.
- Volume Button: Press the volume button each time to adjust the 5 volume levels (Mute/Low/Medium/High/Max).
How to Pair
Note: This device is already paired.
If there are any disconnection or short-range issues, please follow the instructions below:
- Press and hold the receiver's pairing button [pairing button] for 3 seconds until the receiver makes a "Ding-Ding" sound.
- Then press the kinetic bell push.
- The receiver makes a "Ding" sound, meaning pairing between the kinetic bell push and receiver is successful.
- The receiver will make another "Ding-Ding" sound to exit the pairing mode.
Install the Transmitter
Double-sided Tape Installation
Use the included double-sided tape to stick the transmitter to the wall.
[Diagram shows the back of the transmitter unit with double-sided tape applied, and the unit being pressed against a wall.]
Screw Installation
- Use a small standard screwdriver to detach the back plate.
- Screw mount the back plate on the wall using a Phillips screwdriver.
- Snap the transmitter onto the back plate.
[Diagram shows the screw installation process: Step 1: A small screwdriver detaches the back plate from the transmitter. Step 2: The back plate is screwed onto a wall with a Phillips screwdriver. Step 3: The transmitter unit is clicked or snapped onto the mounted back plate.]
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
This marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contact. This product should not be mixed with other commercial wastes for disposal.
Simplified EU Declaration of Conformity
Hereby, Shenzhen Unichain Technology Co., Ltd. declares that the product type HWD01816 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://eu.tecknetonline.com/
