Winged LED Profile
Aluminium Profile
Product Description
The Winged LED Profile is a large square winged profile designed for recessed installation. It features a UV-stabilised PC diffuser and is supplied with spring clips for easy mounting.
Key Features:
- Large square winged profile
- UV Stabilised PC diffuser
- Supplied with spring clips
- Suitable for recessed installation
Dimensions and Cut Out:
Cut Out = 35mm
Profile Dimensions: A cross-section diagram shows the aluminium profile with dimensions. The overall width is 44mm, the height is 40mm, and the internal width for the diffuser is 31mm.
Available Finishes:
Available in Black and White powder coating. Custom colours may incur additional charges and may vary from shown samples.
Product Specifications:
| Part Number | Description | IP Rating | Max Length |
|---|---|---|---|
| HV9695-4540 | 44mm x 40mm Large square winged profile with UV Stabilised PC diffuser - Kit - / Metre. Custom Cut Length. Supplied with Aluminium, Diffuser, 2x spring clips per metre + 2x end caps per length. | IP20 | 3 metres |
| HV9695-4540-3M | 3m Length includes aluminium, diffuser + 6x end caps & 6x spring clips. | IP20 | 3 metres |
IP Rating: IP20 (Indoor Use Only)
Compatible Accessories:
- HV9695-4540-SD-ROLL: Diffuser available for continuous run of up to 20 metres.
Sample Installation Method:
The installation process involves several steps:
- Step 1: Mark and cut the profile to the desired length.
- Step 2: Insert the profile into the prepared recess in the ceiling.
- Step 3: Secure the profile using the provided spring clips, pushing them into place.
- Step 4: Attach the diffuser to the profile.
- Step 5: For continuous runs, connect multiple profiles using the compatible diffuser roll.
