VeGue VS-1088 Karaoke Machine Instruction Manual

Please read this user manual carefully before using the machine.

Model: VS-1088

This document serves as the instruction manual for the VeGue VS-1088 Karaoke Machine.

Important Safety Warning

To ensure personal security and property, please keep in mind the following points:

1. Please use the original power adapter for charging. The charging voltage requires 90V to 240V.
2. Do not use the machine while charging. Do not keep charging for a long time, especially when no one is at home. You should unplug the power adapter and turn off the machine first, or it may cause leakage of electricity, or even a fire, leading to a big loss.
3. The power adapter cannot be squeezed, pulled, bent, knotted, hung with heavy objects, or trampled to prevent the insulation layer of the power adapter from being damaged and causing electric shock.
4. To reduce the risk of fire or electric shock, do not expose the machine to rain or moisture. Do not place objects filled with liquids, such as vases, on the machine.
5. The device is equipped with batteries, so do not expose it to the scorching sun for a long time. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
6. Do not block the heat radiation holes, otherwise, it will cause poor heat dissipation of the machine and affect the service life of the machine.
7. When encountering any issues with the battery or charging, do not disassemble the machine to change the battery, even if you are experienced. Please contact customer service for a replacement.

Package List

• Karaoke Machine*1
• Wireless Microphone*2 (Each requires 2 AA batteries, not included)
• Remote Control*1 (Requires 2 AAA batteries, not included)
• Power Adapter*1
• Phone/Tablet Holder*1
• Microphone Holder*3
• 3.5mm to RCA Cable*1
• 12V External Charging Cord*1
• User Manual*1

Charging Instructions

Please use the power adapter included for charging. The charging time is generally 5 to 8 hours. After fully charged, please unplug the power adapter, as overcharging will damage the battery.

There is an icon on the screen to show battery power. When in low power, the icon will keep flashing until it is out of power. At this moment, please charge the machine as soon as possible.

When charging, the power indicator will show red and keep solid. After fully charged, it will turn to blue.

Note: To prolong the battery life, please keep the following in mind:

1. If the machine is out of power, please charge it within 48 hours.
2. Do not use the machine while charging.
3. After fully charged, unplug the power adapter as soon as possible. This is very important to protect your battery, safety, and property.
4. The machine must be kept with enough power at all times. The battery life will be reduced if you seldom use the machine or don't use it for a long time and keep it without any power.

Technical Specifications

Karaoke Machine

Model: VS-1088

Peak Power: 200W

Sensitivity: 500±30mV

S/N Ratio: ≥70dB

Frequency Response: 50Hz~20kHz

Input Voltage: DC 15V

Adapter: 15V/2.4A

Microphone

Frequency Response: 40Hz~18kHz

Operating Distance: 98FT (without any interference)

S/N Ratio: >80dB

T.H.D.: <0.5%

Microphone Input Sensitivity: -50dB

RF Sensitivity: >12dBu (S/N=20dB)

Working Temperature: -10~50°C

Description of Remote Control

The remote control allows you to manage various functions of the karaoke machine:

• Power: Turn on/off the machine.
• Mode: Switch between Bluetooth, Line, and FM modes.
• Numeric Keypad (0-9): Select songs from USB or TF card.
• EQ: Choose from 5 EQ modes.
• Mute: Mute the audio.
• REP: Repeat song in USB or TF card.
• SCAN: Select one of the saved FM channels.
• Previous: Go to the previous song or FM channel.
• NEXT: Go to the next song or FM channel.
• Volume Down: Decrease the volume.
• Volume Up: Increase the volume.
• Play/Pause: Play or pause the music.

Description of Panel Function

The control panel on the karaoke machine includes the following:

• 1. LED Digital Display: Shows current status and information.
• 2. Main Features Buttons: Includes Line/Bluetooth/FM mode switch, Record, TWS, etc.
• 3. USB or TF Card Slot: For playing music or recording.
• 4. Mic Volume Control: Adjusts the volume for the microphones.
• 5. 3.5mm Audio Input: Connect external audio devices.
• 6. Treble Control: Adjusts the treble for music (music only).
• 7. Bass Control: Adjusts the bass for music (music only).
• 8. Musical Instrument Volume Control: Adjusts the volume for connected musical instruments.
• 9. Main Volume Control: Adjusts the overall volume of the machine.
• 10. Echo Control: Adjusts the echo effect for the microphone (mic only).
• 11. Charging Indicator: Shows the charging status (Red for charging, Green for fully charged).
• 12. Wired Mic Input: Connect a wired microphone.
• 13. Musical Instrument Input: Connect electronic musical instruments like piano, guitar, or drums.
• 14. 15V DC Input: Connect the included power adapter.
• 15. External 12V DC Input: Connect an external 12V DC power source (e.g., storage battery).
• 16. LED Light Button: Controls the LED lighting effects.
• 17. Power Button: Turns the machine on or off.

Main Features Instructions

Bluetooth Mode

To use Bluetooth mode: Press the "MODE" button until the screen displays "BLUE". Turn on Bluetooth on your device and start searching. Select "VS-1088" to pair. If pairing fails, reboot the machine or your device and try again. The working range for Bluetooth is 32FT without interference.

Note: The machine does not display lyrics on its screen. Connect the speaker to an iPad, computer, TV, or phone and follow the lyrics on your device while the sound plays through the speaker.

Line Mode

To use Line mode: Press the "MODE" button until the screen displays "LINE". You can connect your phone via a 3.5mm audio cable (not included) or a TV via a 3.5mm to RCA cable. This mode is primarily for devices without Bluetooth. You can also plug in a USB/TF card to record your voice or play music in this mode.

Recording

To record: Switch the mode to "LINE", plug in a USB/TF card, and press the "REC" button to start recording. The first time you record, a folder named "RECORD" will be created on the card. Your recording files will be named sequentially (e.g., REC0001, REC0002, REC0003) and saved in this folder.

Notes on Recording:

1. Recording is only available in "LINE" mode; Bluetooth will not work during recording.
2. The machine only accepts music in MP3, WAV, and WMV formats.
3. The USB or TF card must be formatted as FAT, and the largest capacity supported is 32GB.
4. USB and TF cards cannot be plugged in simultaneously.

FM Mode

To use FM mode: Press the "MODE" button until the screen displays "87.5". Hold the "SCAN" button, and the machine will automatically search for channels from CH1 to CH6. When finished, press the previous/next buttons (represented by < or > symbols) to select your desired channel.

Note: It is very helpful to receive FM signals when the signal strength is good.

TWS Feature

The TWS (True Wireless Stereo) feature is used for pairing two VS-1088 karaoke machines together.

How to use:

1. Turn on the Bluetooth of both machines.
2. Connect one of the machines to your phone via Bluetooth.
3. When the connection is finished, hold the "TWS" button until both machines work as a stereo pair.

Microphone Instructions

The wireless microphones have the following components:

• A. Digital Display: Shows frequency and channel information.
• B. Power Button: Turns the microphone on/off.
• C. Tail Tube: Houses the battery compartment.
• D. Setting Button: Used for adjusting frequencies/channels.

Battery Installation

1. Unscrew the tail tube (C) of the microphone.
2. Insert 2 AA batteries (not included) into compartment "C". Ensure batteries are inserted with the correct polarity (positive and negative poles).
3. Hold the power button (B) to turn on the microphone.

Operating Instructions

1. Each microphone has 50 frequencies/channels: Mic A operates on CHA a-01 to a-50, and Mic B operates on CHB b-01 to b-50.
2. Both microphones will automatically pair with the machine when the power is turned on.
3. If pairing fails, press the setting button (D) to adjust frequencies until it works.
4. Ensure both microphones are in different groups; one should display "CHA" and the other "CHB". If they are in the same group, turn off one microphone first, then hold both the power button and the setting button to switch the group.

Trouble Shooting

If you encounter issues, consult the table below. If the problem persists, please contact customer service.

If you encounter any other problems, such as missing or broken parts, or issues with a new product, please feel free to contact customer service for assistance or a replacement.

Warranty

VeGue provides 2 years of after-sales service, including free replacement for products that are NOT damaged due to accident, alteration, misuse, negligence, or abuse.

If more than 30 days have passed since your Amazon return policy period, you can still contact VeGue via email. They will serve you with full sincerity!

Email: support@veguetech.com

Web: https://www.vuigue.com/