WIRELESS CONTROLLER H510 USER MANUAL

Platform Compatibility

Notes:

• 1 Including Linux and Raspberry Pi.
• 2 Starting with iOS 13, iPadOS 13, tvOS 13, and macOS Catalina.
• 3 Currently unavailable for TV.
• 4 Switch Pro Controller mode only.

Keymapping Profiles

Notes:

• For Android, Steam, Stadia, if connecting as Switch Pro Controller, please refer to the Switch profile.
• Fire devices may support all 4 profiles depending on the pairing method.
• ABXY caps are removable for repositioning as Switch or Xbox layout.

Pair & Link

Pair refers to the first time sync with the device. If wirelessly paired with another device thereafter, the stored info of the 1st device will be erased, new pairing has to be done when back to the 1st device.

Link refers to the reconnection to an ever paired device, whose device info has been stored in the controller automatically.

• Pair methods listed here are the typical to each platform. Read the following guides for more options.
• Fire devices may support all the 4 pairing methods.

Charge the battery

Charge via Type-C USB cable on DC power supplies (output Voltage 5V, current ≥ 250mA), including but not limited to:

• AC adapter
• Switch dock
• USB port of computer
• Others with USB electricity output, like power bank, etc.

The controller supports playing during charging. The 4 LED lights stay lit once full charged.

⚠️ WARNING: Battery Safety

• Do not connect to high voltage outlets.
• Use only approved charger and cord.
• Periodical charging is necessary when unused for long.
• Remove the battery if they are worn out and dispose of properly.

Controllers

Steps:

1. From the HOME screen, select “Controllers”, then “Change Grip/Order”, enter pairing screen, stay here. ℹ️ Operate by Joy-con, touch, or a paired controller. Ignore the instruction on the last screen.
2. Press and hold the + and B buttons until LEDs run.
3. Once succeed, certain light(s) stays lit. Up to 8 controllers can be paired at the same time to a Nintendo Switch system.

Wired Connection

Steps:

1. Enable wired communication in Settings.
2. Connect the controller via USB.

Option 1: Bluetooth (Xinput)

Steps:

1. Press and hold the + and X buttons until LEDs run.
2. Turn on Bluetooth, add the device “GamepadX”.

Result: Work as Bluetooth XINPUT device in Windows, and Xbox One Controller in Steam.

Option 2: Bluetooth (Switch Pro Controller)

Steps:

1. Press and hold the + and B buttons until LEDs run.
2. Turn on Bluetooth, add the device “Pro Controller”.

Result: Work as Nintendo Switch Pro Controller in Steam. Support motion control.

Option 3: USB (Xbox 360 Controller)

Steps: Connect the controller via USB.

Result: Work as Xbox 360 Controller for Windows.

Option 1: Android Gamepad

Steps:

1. Turn on Bluetooth, click “Pair new device”.
2. Press and hold the + and A buttons until LEDs run.
3. Find the device “Gamepad” to pair.
4. Once succeed, light stays on.

To Link: Just press the Home button to link to the device ever paired (ensure Bluetooth is on).

Option 2: Switch Pro Controller

Pairing method for Switch (see Connect to Switch) also applies to Android. The controller will be paired as Switch Pro Controller, work in supported games.

Connect to Linux

Option 1 (Android Gamepad) also applies to Linux or Raspberry Pi, as long as the device has Bluetooth enabled.

ℹ️ INFO:

This pairing mode will pair the controller as Xbox One Controller. Same applies to other Apple devices like iPad, Mac and Apple TV, and Google Stadia.