GuineaLoft Cheese House Single Installation Guide

REMEMBER TO PEEL

Use a scratcher. Scratch up an edge. Peel off the unclear protection film.

PACKING LIST

• Back Panel x 1
• Clear Front Panel x 1
• Door Panels x 2
• Side Panels x 2
• Bottom Panel x 1
• Top Panel x 1
• L2 Brackets x 6
• L3 Brackets x 2
• H2 Hinges x 2
• Bar Handle x 1
• M5 6mm Thumb Screws x 2
• M5 6mm Screws x 20
• M6 12mm Screws x 2
• M6 12mm Gaskets x 2

HOW TO INSTALL

Step 1

Attach the Bar Handle to the Top Panel using M5 6mm Screws x 2 and M6 12mm Gaskets x 2.

Step 2

Attach L2 Brackets to the Bottom Panel using M5 6mm Screws x 4.

Step 3

Attach the Back Panel to the Bottom Panel using L2 Brackets and M5 6mm Screws x 4.

Step 4

Attach the Side Panels to the Bottom Panel using L2 Brackets and M5 6mm Screws x 4.

Step 5

Attach the Clear Front Panel to the assembled structure using M5 6mm Screws x 4.

Step 6

Attach the H2 Hinges to the Door Panels using M5 6mm Screws x 4.

Step 7

Attach the Door Panels to the front of the structure using the H2 Hinges and M5 6mm Screws x 2.

Step 8

Attach the remaining Side Panels (or Door Panels, depending on configuration) using M5 6mm Screws x 2.