GuineaLoft Food Feeder Installation Guide
Thank you for choosing the GuineaLoft Food Feeder!
For assistance, please email: GuineaLoft@gmail.com.
Scan the QR code for a video tutorial on how to install.
REMEMBER TO PEEL
Before assembly, ensure you remove the protective film from the components.
Step 1: Scratch on the protection film.
Step 2: Lift up an edge.
Step 3: Peel off the unclear protection film.
PACKING LIST
- Face Panels x 2
- Bottom Panel x 1
- Side Panels x 2
- M5 6mm Screws x 6
- M5 12mm Screws x 2
- Gaskets x 2
- L2 Brackets x 4
HOW TO INSTALL
1. Bottom
- Install L2 brackets onto the bottom panel.
- Screw outside-in with M5 6mm screws.
[Diagram showing L2 brackets being attached to the bottom panel with M5 6mm screws]
2. Wall-Mount
- Assemble a face panel onto the cage wall.
- Screw outside-in with M5 12mm screws & gaskets.
[Diagram showing a face panel being attached to a cage wall using M5 12mm screws and gaskets]
3. Final Assembly
- Assemble a face panel onto the L2 bracket with M5 6mm screws.
- Insert side panels into face panels.
[Diagram showing the final assembly of the food feeder, connecting the face panel to the L2 bracket and inserting side panels into the face panels]
