Haier Portable Air Conditioner

Owner's Manual and Installation Instruction

Manuel d'utilisation et instructions d'installation

Manual del propietario y instrucciones de instalación

Record Keeping

Thank you for purchasing this Haier product. This user manual will help you get the best performance from your new air conditioner.

For future reference, please record the model number and serial number located on the dehumidifier and the date of purchase.

Model number:

Serial number:

Date of purchase:

Staple your proof of purchase to this manual to aid in obtaining warranty service if needed.

Haier Website

Have a question or need assistance with your appliance? Try the Haier Website 24 hours a day, any day of the year! You can also shop for more great Haier products and take advantage of all our on-line support services designed for your convenience. In the US: Haierappliances.com

Important Safety Information
Using the Air Conditioner
Care and Cleaning
Installation Instructions
Troubleshooting
Limited Warranty

Important Safety Information

Read all instructions before using the appliance.

WARNING

To reduce the risk of fire, electrical shock, injury to persons, or damage when using the air conditioner, follow basic precautions, including the following:

Read all of the instructions before using this appliance.
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Do not operate the air conditioner if it has a damaged cord or plug, if it is not working properly, or if it has been damaged or dropped.
Haier does not support any servicing of the air conditioner. Refer to warranty information for refund or exchange options.
Service of all other components may ONLY be completed by a qualified technician.
Disconnect power before servicing or cleaning.
NOTE: Turning off power by pressing the Power button does NOT disconnect the appliance from the power supply.
Do not install or use the air conditioner in any area where the atmosphere contains combustible gases or where the atmosphere is contaminated. Avoid any chemicals coming in contact with your air conditioner.
Do not store anything directly on top of the air conditioner.
Use two or more people to move and install air conditioner.
Never operate the air conditioner without the filters in place.
Do not use the air conditioner near a bathtub, shower or wash basin or other wet area.

WARNING Risk of Fire or Explosion. This unit contains flammable refrigerant. Additional safety precautions must be followed.

Do not use means to accelerate the defrosting process or to clean, other than those recommended by the manufacturer.
The appliance shall be stored in a room without continuously operating ignition sources (for example: open flames, an operating gas appliance or an operating electric heater.
Do not pierce or burn refrigerant tubing. Be aware that refrigerants may not contain an odor.
Keep ventilation openings clear of obstruction.
When handling, installing, and operating the appliance, care should be taken to avoid damage to the refrigerant tubing.
Do not drill holes in the unit.
Maintenance, cleaning, and service should only be performed by technicians properly trained and qualified in the use of flammable refrigerants.
GE Appliances does not support any servicing of the air conditioner.
Dispose of air conditioner in accordance with Federal and Local Regulations. Flammable refrigerants require special disposal procedures. Contact your local authorities for the environmentally safe disposal of your air conditioner.

WARNING How to Insert the Batteries in the Remote Control

Remove the battery cover by sliding it according to the arrow direction.
Insert new batteries, making sure that the (+) and (-) of battery are installed correctly.
Reattach the cover by sliding it back into position.

NOTES:

Use 2 "AAA" (1.5 volt) alkaline batteries. Do not use rechargeable batteries.
Remove the batteries from the remote control if the system is not going to be used for a long time.
Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc) batteries.

WARNING Caution for Ingestion. The battery may cause suffocation if swallowed by children.

Using the Air Conditioner

Controls

Features and appearance will vary. Lights next to the touch pads on the air conditioner control panel indicate the selected settings.

1. Power Button: Press the POWER button to turn unit ON/OFF.

2. Fan Speed Button: Press the FAN button to choose High/Low speed.

3. +/- Button for Temperature and Timer: In Cooling mode, press the + or - button to increase or decrease the temperature setting. In Timer mode, press the + or - button to set time to turn the unit on. Pressing the + or - buttons together will switch between °C and °F.

4. Mode Button: Press the Mode button to choose Cool, Fan, or Dry.

5. Timer Button: Pressing the Timer button in Standby mode will set the time for the unit to turn ON. Pressing the Timer button in ON mode would set the time for the unit to turn OFF.

6. Temperature and Timer Display: The window will indicate temperature and time.

7. Temperature Switch Button (on remote): Pressing the °C/°F button will switch between °C and °F.

8. Sleep button (on remote): Pressing the Sleep button is to choose sleep mode.

Cool Mode

Use the COOL mode for cooling.

To set the COOL mode:

Press the MODE pad until the COOL indicator light is lit.
Press the FAN pad to set HIGH, MEDIUM, or LOW fan speed.
Press + or - to set the desired temperature between 60°F and 86°F in 1°F increments.

After settings have been made, the display will not change back to show the room temperature. The temperature control is used to maintain the room temperature. The compressor will cycle on and off to keep the room at the set level of comfort. Set the temperature control at a lower number and the indoor air will become cooler. Set the temperature control at a higher number and the indoor air will become warmer.

NOTE: If the air conditioner is off and is then turned on while set to COOL, it will take approximately 3 minutes for the compressor to start and cooling to begin.

Cooling Descriptions

For Normal Cooling: Select the COOL mode and HIGH, MEDIUM, or LOW fan speed with a middle set temperature.
For Maximum Cooling: Select the COOL mode and HIGH fan speed with a lower set temperature.
For Quieter & Nighttime Cooling: Select the COOL mode and LOW fan speed with a middle set temperature.

NOTE: If you switch from COOL or DRY mode setting to OFF, wait 3 minutes before restarting.

DRY Mode-Dehumidification

Use the DRY mode to provide dehumidification only. The fan will run at a fixed speed at this setting, so a fan speed cannot be set. Keep windows and doors closed for the best dehumidifying effects.

To set the DRY mode:

Press the MODE pad until the DRY indicator light is lit.

In the DRY mode, a set temperature will not be displayed. After DRY mode has been set, the display will change back to show the room temperature.

NOTE: If you switch from a DRY setting to OFF or to a fan setting, wait at least 3 minutes before switching back to a DRY setting.

If using the unit in the DRY mode as a dehumidifier for an extended time:

Unplug the power cord.
Connect a 1/2" Outer diameter flexible drain hose to the upper drain port and drain to floor drain.
Reconnect the power cord and press the MODE pad until the DRY indicator light is lit.

FAN Mode

Use the FAN mode to provide air circulation and filtering without cooling.

To set the FAN mode:

Press the FAN pad until the desired indicator light for high, medium, or low fan speed is lit.

Since fan only settings do not provide cooling, a set temperature will not be displayed. After FAN speed has been set, the display will change back to show the room temperature.

The exhaust hose and window kit do not need to be installed when operating in fan mode.

Power Outage Recovery Feature

In the case of a power outage or interruption, the unit will automatically re-start in the settings last used after the power is restored.

NOTE: If the TIMER was set before the power outage, it will need to be reset after power is restored.

Care and Cleaning

Cleaning

WARNING

Electrical Shock Hazard

Disconnect power before cleaning. Failure to do so can result in death or electrical shock.

Unplug or disconnect power.
Use only a soft cloth dampened with water to clean the cabinet.

NOTE:

Do not use a liquid or spray cleaner to clean the air conditioner.
DO NOT use chemicals, abrasives, ammonia, chlorine bleach, concentrated detergents, solvents or scouring pads. Some of these chemicals/items may damage and/or discolor your air conditioner.

Dry thoroughly with a soft cloth.
Plug in or reconnect power.

Air Filter

The air filters should be cleaned at least every two weeks for your unit to operate at optimum efficiency.

CAUTION DO NOT operate the air conditioner without a filter because dirt and lint will clog it and reduce performance.

To remove:

Unplug or disconnect power.
Pull to remove upper filter panel.
Wash or vacuum the dust from the air filters.

NOTE: If washed, gently shake the filter to remove the excess water and dust particles trapped in the filter.

Reinstall the filters.
Plug in or reconnect power.

Internal Water Tank

The Water Full indicator ("FL" on the control panel display) illuminates when the internal water tank has filled with condensed water.

To Empty the Internal Water Tank:

Unplug or disconnect power.
Place a shallow 1 quart or larger pan (not included) below the lower drain located on the back (near the bottom) of the air conditioner.
Remove the cap and the rubber plug and drain the water tank.
Re-insert the drain plug and screw the cap snugly into place.
Plug in or reconnect power.

Storage

If the unit is not being used for a long period of time: