Product Overview
This document provides a quick start guide for the WISENET XNF-8010R, XNF-8010RV, and XNF-8010RVM network cameras. These cameras are designed for robust surveillance applications.
Models Covered:
- XNF-8010R
- XNF-8010RV
- XNF-8010RVM
Package Contents
Note: Accessories may vary by region.
Components for XNF-8010R / XNF-8010RV / XNF-8010RVM:
- Camera Unit
- CD containing manuals and software
- Mounting Bracket
- Screws and Wall Anchors for mounting
- Allen Key for adjustments
- Power Cable
- Network Cable (RJ-45 for XNF-8010R/RV, M12 for XNF-8010RVM)
Important: An SD card is not included in the package.
Installation Precautions
- ⚠️ Avoid installing in locations prone to structural damage or excessive vibration.
- ⚠️ Protect the camera from extreme heat (e.g., fire symbol) and freezing temperatures (e.g., snowman symbol).
- ?? Avoid exposure to liquids, moisture, or corrosive substances.
Installation Guide
Step 1: Prepare the Camera Housing
Use the provided Allen key to loosen the screws securing the camera dome cover.
Step 2: Detach the Camera Base
Gently pull the camera base downwards to separate it from the main camera unit.
Step 3: Mount the Bracket
Mark the desired mounting location on the ceiling or wall. Drill holes, insert anchors if needed, and secure the mounting bracket using the provided screws.
Step 4: Route Cables
Pass the power and network cables through the center hole of the mounting bracket.
Step 5: Attach the Camera Unit
Align the camera unit with the mounting bracket and secure it in place.
Step 6: Connect Wiring (XNF-8010R/XNF-8010RV)
Connect the RJ-45 network cable, microphone input, and power connector to the respective ports on the camera.
Step 7: Connect Wiring (XNF-8010RVM)
Connect the M12 network cable, microphone input, and power connector to the respective ports on the camera.
Step 8: Note on Accessories
Note: A WiFi key and OTG adapter are not included. The camera has a micro USB port for connectivity.
Step 9: Reassemble the Camera Dome
Align the camera base with the main unit and push it upwards until it clicks into place.
Step 10: Secure the Camera Dome
Use the Allen key to tighten the screws and fully secure the camera dome cover.
Step 11: Mobile Device Setup
Install the WISENET Installation mobile application on your smartphone or tablet.
Step 12: Computer Software Setup
Install the IP Installer software and the User Manual from the provided CD onto your computer. Follow the on-screen instructions for software setup.
Initial Setup and Configuration
Password Setup
Upon first accessing the camera, you will be prompted to set an administrator password. The "Password Change" window will appear.
Password Complexity Requirements:
- For passwords 8-9 characters long: Use a combination of at least three types: uppercase letters, lowercase letters, numbers, and special characters.
- For passwords 10-15 characters long: Use a combination of at least two types: uppercase letters, lowercase letters, numbers, and special characters.
- The username must be different from the password.
- Available special characters:
~`!@#$%^*()_-+=|{}[].?/ - Do not use 4 or more consecutive identical characters (e.g., 1111, aaaa) or 4 or more consecutive keys (e.g., 1234, abcd).
If you forget your password, press and hold the [RESET] button on the camera to restore factory defaults. It is recommended to record your password in a safe place.
Login Procedure
When you attempt to access the camera, a login screen will appear.
- Enter "admin" in the <User Name> field.
- Enter your password in the <Password> field.
- Click the [OK] button.
WiFi Connection
Camera Setup:
Connect the OTG adapter (5-pin) and the WiFi key to the camera's micro USB port.
Smartphone Setup:
- Install the WISENET Installation application on your smartphone.
- Enable WiFi on your smartphone and select the camera's SSID.
- Launch the WISENET Installation application.
- When connecting to the camera, video will stream. The default password is '4321'. Initial video playback may occur without requiring a login.
- While viewing video on your smartphone, you can adjust the viewing angle.
Environmental Compliance and Disposal
Hanwha Techwin is committed to environmental protection throughout its manufacturing processes. The 'Eco' mark signifies the company's dedication to producing environmentally friendly products and indicates that this device complies with the European RoHS directive.
Proper Disposal of This Device (WEEE)
(Applies in the European Union and other European countries with separate waste collection systems)
This marking on the device, accessories, or documentation signifies that the product and its electronic accessories (e.g., charger, headset, USB cable) should not be disposed of with regular household waste at the end of their service life. To prevent potential harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to support the sustainable reuse of material resources. For more detailed information on where and how to recycle these items, domestic users should contact their retailer or local authority. Business users should contact their supplier and check the terms of their purchase agreement. Do not mix this device and its electronic accessories with commercial waste during disposal.
Proper Disposal of Batteries in This Product
(Applies in the European Union and other European countries with their own battery take-back systems.)
This symbol on the battery, manual, or packaging indicates that batteries in this product must not be disposed of with other household waste at the end of their life. If marked with chemical symbols Hg, Cd, or Pb, the battery contains mercury, cadmium, or lead above the reference levels set by Directive EC 2006/66. If batteries are not disposed of properly, these substances can harm personal health or the environment. To protect natural resources and promote the reuse of materials, please separate batteries from other waste types and have them recycled through your local free battery take-back system.
Contact Information
Head Office
6, Pangyo-ro 319 beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-400 Rep. of KOREA
Tel: +82.70.7147.8753 Fax: +82.31.8018.3740
Hanwha Techwin America
500 Frank W. Burr Blvd. Suite 43 Teaneck, NJ 07666
Toll Free: +1.877.213.1222 Direct: +1.201.325.6920 Fax: +1.201.373.0124
Hanwha Techwin Europe
Heriot House, Heriot Road, Chertsey, Surrey, KT16 9DT, United Kingdom
Tel: +44.1932.57.8100 Fax: +44.1932.57.8101
Hanwha Techwin(Tianjin) Co.Ltd
No.11, Weiliu Rd., Micro-Electronic Industrial Park, Jingang Road Tianjin 300385, China
Tel: +86.22.2388.7788
Hanwha Techwin Middle East FZE
JAFZA View 18, 20th floor, office 2001, 2002, 2003, Downtown Jebel Ali, Dubai, United Arab Emirates
