TN0047A Operation Manual
Model Name: Car Audio
Model No: TN0047A
Index
- 1-Rating
- 2-Button Function Spec
- 3-Radio operation procedure
- 4-Operating manual (Bluetooth/Handsfree)
- 5-Operating manual (Wi-Fi/Carplay)
- 6-FCC Operating manual Requirement
1-Rating
| RATED VOLTAGE | 13.2V (10.5~16.0V) – ground |
| LOAD IMPEDANCE | 4Ω |
| BACK UP CURRENT | 2.1mA or less |
| RATED CURRENT | 7.3A or less (Vcc=13.2V, 0.5W output) |
| AM TUNING RANGE | 530 - 1625 kHz (5kHz step) |
| FM TUNING RANGE | 87.5 – 108 MHz (100kHz step) |
2-Button Function Spec
Description of the device's front panel buttons:
| Button No. | Button Name | Operation |
|---|---|---|
| 1 | POWER | Audio ON/OFF |
| 2 | BACK | Transition to previous screen |
| 3 | HOME/TALK | Short Push: Transition to home screen Long Push: AA/CP voice recognition |
| 4 | VOL DOWN | Short Push: Decrease Volume Down 1 step Long Push: Decrease Volume Down continuously |
| 5 | VOL UP | Short Push: Increase Volume Up 1 step Long Push: Increase Volume Up continuously |
3-Radio operation procedure
Step 1: Initial Power On
After turning the ignition to ACC-ON, confirm that the Toyota logo screen is displayed.
Step 2: CAUTION Screen
After a few seconds, the screen will transition to the "CAUTION" screen.
Step 3: Navigate to Menu
Press the "Continue" button on the face panel after a few seconds to proceed to the MENU screen.
Step 4: Access Radio Mode
Press the POWER button. Then, tap the Radio Mode Window on the screen to display the "FM1" screen.
Step 5: SEEK Operation
To initiate a seek for radio stations, press the "<" or ">" button. This action will start the seek function.
Note: The same procedure applies to AM/DAB modes.
4-Operating manual (Bluetooth/Handsfree)
Step 1: Initial Power On
After turning the ignition to ACC-ON, confirm that the Toyota logo screen is displayed.
Step 2: CAUTION Screen
After a few seconds, the screen will transition to the "CAUTION" screen.
Step 3: Navigate to Menu
Press the "Continue" button on the face panel after a few seconds to proceed to the MENU screen.
Step 4: Access Settings
Press the "Setting" button on the face panel to navigate to the SETTINGS screen.
Step 5: Select Bluetooth
Confirm the "Settings" screen is displayed, then select the "Bluetooth" button on the display.
Step 6: Add Device
Press the "Add Device" button on the screen.
Step 7: Search Device
Press the "Search Device" button on the screen.
Step 8: Pairing Mode
Set your Bluetooth-enabled device (e.g., iPhone, iPod) to pairing mode.
Step 9: Select Device
Select the connected iPhone or iPod from the list of available devices.
Step 10: Connection Confirmation
"Connection Completed" will be displayed upon successful pairing.
5-Operating manual (Wi-Fi/Carplay)
Step 1: Initial Power On
After turning the ignition to ACC-ON, confirm that the Toyota logo screen is displayed.
Step 2: CAUTION Screen
After a few seconds, the screen will transition to the "CAUTION" screen.
Step 3: Navigate to Menu
Press the "Continue" button on the face panel after a few seconds to proceed to the MENU screen.
Step 4: Access Settings
Press the "Setting" button on the face panel to navigate to the SETTINGS screen.
Step 5: Select CarPlay Setting
Confirm the "Settings" screen is displayed, slide down, and select the "Search Apple CarPlay Setting" button.
Step 6: Initiate Search
Press the "Search" button. Ensure Bluetooth is enabled on the iPhone you wish to connect.
Step 7: Select iPhone
Select the connected iPhone from the list.
Step 8: Confirm Pairing
On the product, press the [OK] button. On the iPhone, press [Pairing].
Step 9: CarPlay Connection Complete
Connection is finalized when the screen automatically transitions to the CarPlay interface.
6-FCC Operating manual Requirement
Co-location: This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
CAUTION: Radio Frequency Radiation Exposure
This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person's body.
