Instruction Manual for DENSO models including: TN0047A, BABTN0047A, TN0047A Car Audio, TN0047A, Car Audio, Audio
DENSO TEN Limited TN0047A BABTN0047A BABTN0047A tn0047a
Type.B-1 TN0047A Operation Manual Model name Model No Car Audio TN0047A Index 1-Rating 2-Button Function Spec 3-Radio operation procedure 4-Operating manual (Bluetooth/Handsfree) 5-Operating manual (Wi-Fi/Carplay) 6-FCC Operating manual Requirement Page 2P 3P 4P 5P 6P 7P (1/7) 1-Rating Type.B-1 RATED VOLTAGE LOAD IMPEDANCE BACK UP CURRENT RATED CURRENT AM TUNING RANGE FM TUNING RANGE DAB TUNING RANGE 13.2V (10.516.0V) - ground 4 2.1mA or less 7.3or less (Vcc=13.2V, 0.5W output) 531 - 1602 kHz (9kHz step) 87.5 - 108 MHz (100kHz step) 174.928-229.072 MHz (2/7) 2-Button Function Spec Type.B-1 12 3 4 5 AUDIO controls Button No. Button Name POWER BACK HOME/TALK VOL DOWN VOL UP Operation Audio ON/OFF Transition to previous screen Short Push: Transition to home screen Long Push: AA/CP voice recognition Short Push: Decrease Volume Down 1 step Long Push: Decrease Volume Down continuously Short Push: Increase Volume Up 1 step Long Push: Increase Volume Up continuously (3/7) 3-Radio operation procedure [Operation procedure] (ACC-ON) ACC-ONTOYOTA After the ACC-ON, confirm that Toyota screen is displayed. "CAUTION" The screen is changed to "CAUTION" screen after a few seconds. "Continue"MENU Press the "Continue" button on the face panel after a few seconds to move MENU screen. Menu Screen Display POWER "FM1 " Press the POWER button. When the Radio Mode Window on the screen is pressed,"FM1" screen is displayed. Press anywhere in this area "<" ">" SEEK Confirm that the screen is changed as below, Please push down the "<"button or ">"button. This will start to SEEK. Push this button AM/DAB Same as AM/DAB mode. Type.B-1 (4/7) 4-Operating manual (Bluetooth/Handsfree) [Operation procedure] (ACC-ON) ACC-ONTOYOTA After the ACC-ON, confirm that Toyota screen is displayed. "Add Device" Please press the "Add Device" button of the screen Type.B-1 "CAUTION" The screen is changed to "CAUTION" screen after a few seconds. Push this button "Search Device" Please press the "Search Device" button of the screen "Continue"MENU Press the "Continue" button on the face panel after a few seconds to move MENU screen. Push this button BluetoothiPhone iPod) Confirm if screen is changed as below, Please set iPhone or iPod in pairing mode. Push this button Menu Screen Display "Setting"SETTINGS Please press the "Setting" button on the face panel to move to Settings screen Displays when you have more than one pairing equipment iPhoneiPod Select the iPhone or iPod to connect. Push this button "Settings""Bluetooth" Confirm if "Settings" screen is displayed, select the "Bluetooth" button on the display. Push this button Operate the phone after the message on the screen "Connection Completed" "Connection Completed" is displayed if completed. (5/7) 5-Operating manual (Wi-Fi/Carplay) Type.B-1 [Operation procedure] (ACC-ON) ACC-ONTOYOTA After the ACC-ON, confirm that Toyota screen is displayed. "Search" iPhoneBluetooth ON) Please press the "Search" button of the screen At this time, turn on Bluetooth on the iPhone to be connected. "CAUTION" The screen is changed to "CAUTION" screen after a few seconds. iPhone Please Select the connected iPhone. Push this button "Continue"MENU Press the "Continue" button on the face panel after a few seconds to move MENU screen. [OK]iPhone [] If the display looks like the one below, press the [OK] button on the product side and press [Pairing] on the iPhone side. Push this button Menu Screen Display "Setting"SETTINGS Please press the "Setting" button on the face panel to move to Settings screen Push this button "Settings" "Seach Apple CarPlay Setting" Confirm that the screen will change to the "Settings" screen, slide it down and select the "Seach Apple CarPlay Setting" button on the screen. Connecting... CarPlay Connection is completed when the screen automatically transitions to the CarPlay screen. (6/7) 6-FCC Operating manual Requirement Type.B-1 Co-location: This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. CAUTION: Radio Frequency Radiation Exposure This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person's body. (7/7)Microsoft: Print To PDF