Angle brace WS 31-45°
Angle brace for stable constructions
Product Overview
The fischer Angle brace WS 31-45° is designed for constructing stable constructions, particularly self-supporting channel constructions using FLS channels or ALK cantilever arms. It is suitable for use in dry interior areas.
Visual Description of Product and Applications:
- An angled metal brace, likely made of steel, with pre-drilled holes.
- A cable tray system with multiple colored cables running through it, mounted on a cantilever arm.
- A ventilating pipe secured to a wall using a bracket and screws.
Applications
- Angle brace to construct self-supporting channel constructions with FLS channels or ALK cantilever arms.
- For use in dry interior areas.
Advantages
- The stable angle brace element WS 31-45° provides the supporting structure with great stability and safety.
- The dimensions of the angle brace element ensure a secure connection with ALK cantilever arms and FLS channels due to its fitting accuracy.
- Standardized long slots in the angle brace allow for precise connection to ALK cantilever arms or FLS channels using FSM Clix P and a screw.
Properties
- Material: steel S235JR (material no. 1.0037) according to DIN EN 10025
- Zinc plating: electro zinc-plated
Installation Guidance
Installation involves specific dimensions and torque settings:
- Dimension: 172.5 mm
- Tightening torque (Tinst): 10 Nm
Note: Diagrams illustrate the installation process with these specifications.
Technical Data and Loads
Technical Data:
| Item | Item no. | Hole-Ø D [mm] | Sales unit [pcs] |
|---|---|---|---|
| WS 31-45° | 538749 | 11 | 10 |
Load Data for Various Cantilever Arms:
| Item | Item no. | Max. recommended static load case 1a [kN] | Max. recommended static load case 2a [kN] | Max. recommended static load case 3a [kN] | Sales unit [pcs] |
|---|---|---|---|---|---|
| ALK 17-200 | 538738 | 1.03 | 1.03 | 1.03 | 10 |
| ALK 17-300 | 538739 | 1.52 | 0.45 | 1.52 | 10 |
| ALK 30-200 | 538740 | 2.52 | 1.40 | 2.52 | 10 |
| ALK 30-300 | 538741 | 1.78 | 0.89 | 1.78 | 10 |
| ALK 30-450 | 538742 | 1.16 | 0.47 | 1.16 | 10 |
| ALK 37-300 | 538743 | 1.78 | 0.89 | 1.78 | 10 |
| ALK 37-450 | 538744 | 1.16 | 0.59 | 1.16 | 10 |
| ALK 37-600 | 538745 | 0.89 | 0.45 | 0.89 | 5 |
Notes on Load Application and Fixing:
- Loads are valid for fixing to a wall with adequate carrying capacity.
- Fixing of the cantilever arm and the angle brace to the wall should be done using an anchor (e.g., FAZ II Plus, UltraCut FBS II 8).
- Fixing of the angle brace to the cantilever profile is done by FSM Clix P 10, with a tightening torque of 12 Nm.
- Fixing of the angle brace to the long slot of the cantilever profile is done by screw and nut M10, with a tightening torque of 20 Nm.
Load Case Diagrams:
- Load case 1: Diagram showing a load (F) applied at the midpoint of a length (L/2).
- Load case 2: Diagram showing a load (F) applied at the end of a length (L).
- Load case 3: Diagram showing a distributed load (F = q x L) over a length (L).
