Razer Kishi V3 Pro XL Master Guide

Table of Contents

1. Package Contents
2. What You Need
3. Warranty
4. Getting Started
5. How to Use Your Controller
6. Safety and Maintenance
7. Legal Information

1. Package Contents

The Razer Kishi V3 Pro XL includes:

• Razer Kishi V3 Pro XL
• Replaceable thumbstick caps (2 types: concave/convex)
• 3 sets of replaceable rubber cushions

Controller Diagram and Button Layout:

• A. Home Button
• B. Full-size TMR Thumbsticks with replaceable caps (L3/R3)
• C. Option Button
• D. Razer Mecha-Tactile 8-way D-Pad
• E. Share Button
• F. Extendable Bridge
• G. USB Type-C Connector
• H. Menu Button
• I. Mecha-Tactile Action Buttons
• J. Status Indicator
• K. Razer Nexus Button
• L. USB Type-C Port
• M. 3.5mm Audio + Mic Port
• N. Full-size Bumpers (L1/R1)
• O. Multifunction Mouse-Click Grip Bumpers (L4/R4)
• P. Full-size Triggers (L2/R2)
• Multifunction Mouse-Click Back Paddles (M1/M2)

Replaceable Rubber Cushions:

Three sets of replaceable rubber cushions are provided:

• Cushion A (Pre-installed): For iOS devices.
• Cushion B: For tablets.
• Cushion C: For Android devices.

Note: Cushion A is pre-installed. If you need to check if your phone with a case fits the controller, you may remove the rubber cushions.

Replacing Thumbstick Caps:

Instructions on how to replace the two thumbstick caps are provided, showing how to align and attach the new caps.

2. What You Need

System Requirements:

• Mobile device or PC with a USB Type A / Type C port.
• iOS 18 / Android™ 14 or later.
• Windows® 11 64-bit or later.
• macOS Sonoma or later with Apple silicon "M" series or higher.
• Internet connection for app installation.

For a complete compatibility list, visit: rzr.to/kishi-v3-pro-xl

3. Warranty

Your product's serial number is displayed here. [Image showing a diagram with an arrow pointing to a serial number location on the controller].

Register your product to get exclusive benefits at razerid.razer.com/warranty.

If you have questions, contact the Razer Support Team at support.razer.com.

4. Getting Started

Mobile Setup

Follow these steps to set up the controller with your mobile device:

1. Place your mobile device into the controller. [Diagram showing a mobile device being inserted into the controller, with an arrow indicating the direction].
2. Extend the controller to fit your device. [Diagram showing the controller being extended]. A white light will illuminate for 2 seconds.

Supported maximum size: 12.32 mm (including camera thickness) x 282 mm (length).

Installing the Razer Nexus Game Launcher

The Razer Nexus Game Launcher allows you to launch supported games, reassign controller buttons, enable/disable haptic feedback, take screenshots, record and share gameplay, and access many other features.

• Download on the App Store [Link to App Store].
• Get it on Google Play [Link to Google Play].
• Android Download: RZR.TO/NEXUS-DL (China only).

The Razer Nexus Game Launcher icon is displayed, along with a QR code for the app.

PC Setup

Connect the controller to your PC:

1. Connect the controller to your PC using a USB Type-C cable. [Diagram showing the controller connected via USB-C to a PC]. The indicator light will turn white for 2 seconds.

Charging cable not included. When using the controller with a PC, remove your mobile device. The controller will use XInput on Windows.

5. How to Use Your Controller

Removing Your Smartphone

Instructions on how to remove your smartphone from the controller are provided with diagrams.

Pass-Through Audio

Connect your Razer headset (sold separately) to the 3.5mm audio port for pass-through audio. This feature works with both mobile device and PC connections. [Diagram showing a headset plugged into the controller's 3.5mm jack].

Pass-Through Charging

Use the included USB A to USB C cable for pass-through charging. The indicator light will turn amber for 10 seconds. [Diagram showing the controller connected for charging].

Charging cable not included. Use only the included USB A - USB C cable. USB Type-C audio and other accessories are not supported.

Using Rubber Cushions

Instructions and diagrams show how to attach the different rubber cushions (A, B, C) for iOS devices, tablets, and Android devices respectively.

Replacing Thumbstick Caps

Diagrams illustrate the process of replacing the thumbstick caps.

Remapping Multifunction Buttons (M1/M2/L4/R4)

To remap buttons:

1. Press and hold the Nexus button, then press the multifunction bumper/paddle you want to remap. The indicator will blink white for 10 seconds (Mapping Mode). [Diagram showing the Nexus button and a paddle being pressed].
2. Press the button you want to assign. The indicator will blink green for 1.5 seconds, indicating successful remapping. [Diagram showing a button being pressed, followed by a success indicator].

Shortcut Commands

The following shortcut commands are available:

6. Safety and Maintenance

Safety Guidelines

To ensure maximum safety when using the Razer Kishi V3 Pro XL, follow these guidelines:

• If the product malfunctions and troubleshooting does not resolve the issue, unplug the product (if applicable) and contact Razer support at support.razer.com.
• Do not disassemble the product. Do not operate it with abnormal electrical loads, as this will void the warranty.
• To prevent accidents or injuries, keep controller accessories out of the reach of small children.
• Keep the product away from liquids, humidity, or moisture. Operate the product within the specified temperature range (0°C to 40°C). If the temperature exceeds this range, remove the product and wait for the temperature to stabilize to the optimal level.

Maintenance and Care

Minimal maintenance is required to keep your Razer Kishi V3 Pro XL in optimal condition. Once a month, clean the product with a soft cloth or cotton swab to remove accumulated dirt.

7. Legal Information

Copyright and Intellectual Property Notice

©2025 Razer Inc. All rights reserved. Razer, the triple-headed snake logo, Razer logo, "For Gamers.By Gamers.", and "Powered by Razer Chroma" are trademarks or registered trademarks of Razer Inc. in the U.S. and/or other countries.

Android, Google, Google logo, Google Play, and Google Play logo are trademarks of Google LLC.

The "Made for Apple" badge signifies that the accessory has been designed to connect specifically with Apple products identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that use of this accessory with Apple products may affect wireless performance.

Apple, Apple logo, iPad mini, iPhone, Made for iPad logo, Made for iPhone logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

Windows and the Windows logo are trademarks of the Microsoft group of companies.

Razer Inc. ( "Razer" ) may own copyright, trademark, trade secret, patent, patent applications, or other intellectual property rights relating to the products described in this document (registered or unregistered). The provision of this document does not grant any license to the copyright, trademark, patent, or other intellectual property rights mentioned above. Razer Kishi V3 Pro XL ( "the Product" ) may differ from the photos shown on the packaging or elsewhere. Razer is not responsible for such differences or any inaccuracies in the appearance. The information contained in this document is subject to change without notice.

Limited Product Warranty

For the most current and up-to-date terms of the limited product warranty, please refer to razer.com/warranty.

Limitation of Liability

In no event shall Razer be liable for any damages, including any lost profits, loss of information or data, or special, incidental, indirect, punitive, or consequential damages arising out of the distribution, sale, resale, use, or inability to use the product, even if Razer has been advised of the possibility of such damages. In any event, Razer's liability shall not exceed the retail purchase price of the product.

General

The foregoing terms shall be governed by and construed in accordance with the laws of the jurisdiction in which the product was purchased. If any provision of this agreement is found to be invalid or unenforceable, that provision shall be deemed severed and shall not affect the validity or enforceability of the remaining provisions. Razer reserves the right to modify any of the terms without prior notice at any time.