iRobot Roomba 560 Side Sweeper Replacement
Replace the side sweeper so that dirt and lint are guided to your Roomba's vacuum bin.
Written By: Mairead Blaes
Introduction
If your Roomba is experiencing performance issues or is not picking up enough dirt, this guide will help you remove and clean or replace its side sweeper. The side sweeper is designed to direct dirt into the main brush. Due to its position on the outer edge of the Roomba 560, it is susceptible to damage and clogging from hair and dirt.
Tools Required
- JIS #1 Screwdriver (1)
Replacement Procedure
Step 1: Remove the Side Sweeper
Action: Flip the Roomba upside down.
Action: Unscrew the single 5 mm screw securing the yellow side sweeper using a Phillips #2 driver.
Visual Description: The iRobot Roomba 560 is positioned upside down. A hand is shown using a screwdriver to remove a screw from the yellow side sweeper component.
Step 2: Detach the Side Sweeper
Action: Lift the yellow side sweeper away from the device to remove it.
Visual Description: A hand is lifting the yellow side sweeper component away from the Roomba, completing its removal from the unit.
Reassembly
To reassemble your device, follow these instructions in reverse order.
