Kasa Smart Wi-Fi Power Strip, 6-Outlets

Contents

• About This Guide
• Introduction
• Appearance
• Set Up Your Smart Power Strip
• Main Device Controls
• Configure Your Smart Power Strip
• Create Scenes
• Discover Kasa
• Authentication
• Compliance Information
• Safety Information

About This Guide

This guide provides a brief introduction to the Kasa Smart Wi-Fi Power Strip and the Kasa app, along with regulatory information. Features may vary based on model, software version, location, language, and internet service provider. All images and descriptions are for demonstration purposes only.

Conventions

More Info

• Specifications are available at https://www.tp-link.com.
• Technical Support and troubleshooting information can be found at https://www.tp-link.com/support.

Introduction

The Kasa Smart Wi-Fi Power Strip, with 6 individually controlled smart outlets and 3 always-on USB ports, is ideal for family rooms, home offices, and small businesses. Download the Kasa app to control your outlets remotely, offering easy step-by-step installation and convenient control from anywhere.

Key Features

• 6 Smart Outlets: Independently control 6 smart outlets from your smartphone via the Kasa Smart app.
• Surge Protection: ETL certified surge protection shields electronics from power surges and overloading.
• 3 USB Ports: Charge your tablet, smartphone, or other devices using the always-on USB ports (5V/2.4A each, 5V/4A total).
• Energy Monitoring: Monitor energy consumption of devices plugged into your smart power strip.
• No Hub Required: Connects directly to your existing Wi-Fi router.
• Scheduling: Set schedules to automatically turn devices on and off.
• Voice Control: Use voice commands with Alexa or Google Assistant to control your devices.

Supported Load Types

Appearance

The Smart Power Strip features 6 individual smart outlets with control buttons and status LEDs. The SYS Wi-Fi, Grounded, and Protected LEDs change color to indicate status. The power strip includes:

• 1. SYS Wi-Fi LED: Indicates Wi-Fi connection status (Orange: Rebooting; Blinking Orange/Green: Setup mode; Blinking Green: Searching for Wi-Fi; White: Connected to Wi-Fi).
• 2. Grounded LED: Lit when the outlet is properly grounded.
• 3. Protected LED: Lit when the device is under surge protection.
• 4. Smart Outlets (1-6): Numbered from left to right, each outlet is independent and can be controlled via the Kasa app.
• 5. LED of Smart Outlet: Lit when the corresponding smart outlet is on.
• 6. Control Button (1-6): Press to turn the corresponding outlet on/off. Press and hold for 5s to re-enable setup mode. Press and hold for 10s to restore factory default settings.
• 7. USB Ports: For charging devices (5V/2.4A each, 5V/4A total).
• 8. Main Switch: Turns the entire power strip on or off.
• Back Panel: Contains a RESET button.

Set Up Your Smart Power Strip

Follow these steps to set up your Smart Power Strip using the Kasa Smart app:

1. Download and Install Kasa App: Go to Google Play or the Apple App Store, or scan the QR code to download the Kasa app on your Android or iOS smartphone or tablet.
2. Log In or Sign Up with TP-Link ID: Open the app and log in with your TP-Link ID. If you don't have one, tap 'Create Account' and follow the app's guidance.
3. Add Device: Tap the '+' button in the Kasa app, select 'Smart Power Strip', and follow the step-by-step app instructions to complete the setup. The app interface shows options to add various Kasa devices like Smart Plugs, Smart Power Strips, Smart Switches, and Smart 3-Way Switches.

Main Device Controls

After setup, the Kasa app's Home Page displays the status of all added devices. You can manage each of the 6 smart outlets of the HS300 individually.

Kasa App Interface

The app provides a 'Home Page' view listing your smart plugs and their on/off status, and a 'Device Status' screen for detailed control and management of individual outlets.

Configure Your Smart Power Strip

Within the Kasa app's 'Device Status' page, you can configure various settings for your smart outlets:

• Set Schedule: Create custom schedules to automatically turn outlets on or off at specific times.
• Preset Away Mode: Set the Away Mode to have your smart outlet randomly turn on/off during a specified period, simulating occupancy.
• Set Timer: Configure a timer for outlets to turn on or off automatically after a set duration.
• Check Usage: View and track the energy consumption of connected devices, showing current runtime, total runtime, and daily averages.
• Device Settings: Access and change various settings for your smart outlets, including renaming, assigning icons, and enabling remote control via voice assistants like Amazon Alexa and Google Assistant.

Create Scenes

A scene is a preset group of smart devices that can be programmed, customized, and activated simultaneously with a single tap from your smartphone or tablet. Scenes allow you to easily set your mood, activity, or automate actions for special occasions.

Discover Kasa

Integrate your Kasa Smart Power Strip with Amazon Alexa, Google Home Assistant, and other smart home platforms like Nest for a hands-free experience. This allows for voice control and automated actions based on your presence (e.g., arriving home or leaving).

To set up these integrations, navigate to 'Add Device' > 'WORKS WITH KASA' in the Kasa app and select the desired service (e.g., Nest Home and Away, Amazon Alexa, Google Assistant) for detailed instructions.

Authentication

COPYRIGHT & TRADEMARKS

Specifications are subject to change without notice. TP-Link is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of these specifications may be reproduced or used to create derivative works without permission from TP-Link Technologies Co., Ltd. Copyright © 2018 TP-Link Technologies Co., Ltd. All rights reserved.

Compliance Information

FCC Compliance Statement

Product Name: Kasa Smart Wi-Fi Power Strip, 6-Outlet
Model Number: HS300
Responsible Party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc.
Address: 145 South State College Blvd. Suite 400, Brea, CA 92821
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6803
E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by:

• Increasing the separation between the equipment and receiver.
• Connecting the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consulting the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. TP-Link USA Corporation has determined that the equipment shown complies with applicable technical standards, FCC part 15. Issue Date: 2018.7.16

NCC Notice

Attention!

According to the Low Power Radio-Frequency Radiating Electric Machinery Management Regulation:

Article 12: Low power radio-frequency radiating electric machinery that has passed type certification may not alter frequency, increase power, or change original design characteristics without permission from the company, firm, or user.

Article 14: The use of low power radio-frequency radiating electric machinery must not affect aviation safety and interfere with lawful communications. If interference phenomena are discovered, the user shall cease using it immediately and improve it until no interference occurs. Lawful communication refers to radio communication operated in accordance with telecommunications regulations. Low power radio-frequency radiating electric machinery must tolerate interference from lawful communication or from electric machinery radiating from industrial, scientific, and medical applications.

BSMI Notice

Safety Consultation and Precautions

• Use only the original power adapter or a power adapter of the specified type for this product.
• Unplug the power cord before cleaning the product. Do not use liquid, aerosol cleaners, or a damp cloth for cleaning.
• Be aware of moisture; do not spill water or other liquids onto the product.
• Slots and openings are provided for ventilation to ensure reliable operation and prevent overheating. Do not block or cover these openings.
• Do not place the product near heat sources. Do not place it in a closed environment without normal ventilation.
• Do not open the casing yourself or attempt to repair the product. Please have authorized personnel perform such work.

Restricted Substances Declaration

This statement declares the presence of restricted substances in product components.

Note 1: 'Exceeds 0.1 wt%' and 'Exceeds 0.01 wt%' indicate that the percentage content of the restricted substance exceeds the reference percentage value.

Note 2: '—' indicates that the restricted substance does not apply.

Note 3: '○' indicates that the percentage content of the restricted substance does not exceed the reference percentage value.

Safety Information

• Keep the device away from water, fire, humidity, or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use the device where wireless devices are not allowed.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.

Please read and follow the above safety information when operating the device. TP-Link cannot guarantee that no accidents or damage will occur due to improper use. Use this product with care and operate at your own risk.

CAUTION

• Do not install this device if there is not at least 10 meters (30 feet) or more of wire between the electrical outlet and the electrical service panel.
• To reduce the risk of electric shock, use only indoors.
• Risk of electric shock: Do not plug into another relocatable power tap or an extension cord.
• Use only in dry locations.
• USB ports are for charging IT Equipment Only.
• Not intended to be mounted on a desk or similar furnishing surface.
• WARNING: Timer could turn on unexpectedly without the user being present. To reduce the hazardous condition, unplug the appliance controlled by the timer before servicing.

Explanation of Symbols on the Product Label

Recycling Information