JBC Premium Desoldering Station with Electric Pump

Introduction

The JBC DIS-D is a premium desoldering station featuring an electric pump, designed for efficient and precise desoldering tasks in electronics repair and rework. It offers advanced features for professional use.

Packing List

The following items should be included:

• DI Control Unit (Ref. DI-1D (120V), DI-2D (230V), DI-9D (100V)) - 1 unit
• Electric Desoldering Module (Ref. MS-A) - 1 unit
• Desoldering Iron (Ref. DR560-A) - 1 unit
• Stand (Ref. DR-SD) - 1 unit
• ESD Tip Cleaner (Ref. CL8499) - 1 unit
• Sponge (Ref. S0354) - 1 unit
• Metal Brush (Ref. CL6217) - 1 unit
• Brass wool (Ref. CL6210) - 1 unit
• Stand Cable (Ref. 0011283) - 2 units
• Module Cable (Ref. 0010207) - 1 unit
• Power cord (Ref. 0009401 (230V) / 0009417 (100/120V)) - 1 unit

Check the JBC website for corresponding manuals and availability in other languages.

DR560 Accessories

• Tip cleaning set (Ref. 0965970) - 1 unit
• Long Tip Cleaning set (Ref. 0781137) - 1 unit
• Tips (Ref. C560005 (x1), C560013 (x1), C560004 (x1)) - 3 units
• Glass solder collector (Ref. 0002600) - 1 unit
• Spanner (Ref. 0780550) - 1 unit
• Filter Box (Ref. 0780840) - Contains 10 filters - 1 unit
• Internal gasket (Ref. 0019208) - Contains 2 gaskets - 1 unit
• Metal solder collector (Ref. 0812630) - 1 unit
• Union Flanges (Ref. 0011356) - 1 unit
• Cotton Filter (Ref. 0781046) - Contains 10 filters - 1 unit
• Filter Box (Ref. 0005966) - Contains 50 filters - 1 unit
• Cleaning stick (Ref. 0786640) - 1 unit
• Suction Filter (Ref. 0821830) - 1 unit
• Manual (Ref. 0020506) - 1 unit

Features

The DI Control Unit (Ref. DI-1D (120V), DI-2D (230V), DI-9D (100V)) features a main power switch, a fuse holder (T1A for DI-2D, T2A for DI-1D, T2.5A for DI-9D), a power socket, a port for the desoldering module, and an equipotential connection.

The Desoldering Iron (Ref. DR560-A) connects to the Stand (Ref. DR-SD), which also houses the Suction Filter (Ref. 0821830).

The Electric Desoldering Module (Ref. MS-A) connects to the DI Control Unit via the Module Cable (Ref. 0010207).

The Stand Cable (Ref. 0011283) connects the DI Control Unit to the Stand.

Compatibility

Select the equipment that best suits your soldering or desoldering needs.

* The MN-A Nitrogen Flow Regulator is required.

Maintenance

Before carrying out maintenance, always allow the equipment to cool.

• Clean the station screen with a glass cleaner or a damp cloth.
• Use a damp cloth to clean the casing and the tool. Alcohol can only be used to clean the metal parts.
• Periodically check that the metal parts of the tool and stand are clean so that the station can detect the tool status.
• Maintain tip surface clean and tinned prior to storage to avoid tip oxidation. Rusty and dirty surfaces reduce heat transfer to the solder joint.
• Periodically check all cables and tubes.

Replacing a blown fuse:

1. Pull off the fuse holder and remove the fuse. If necessary, use a tool to lever it off.
2. Insert the new fuse into the fuse holder and return it to the station.

Replace any defective or damaged pieces using only original JBC spare parts.

Repairs should only be performed by a JBC authorized technical service.

Safety

⚠️ It is imperative to follow safety guidelines to prevent electric shock, injury, fire, or explosion.

• Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire.
• The power cord must be plugged into approved, properly grounded bases. When unplugging, hold the plug, not the wire.
• Do not work on electrically live parts.
• Place the tool in the stand when not in use to activate sleep mode. The soldering tip, metal part of the tool, and stand may remain hot even when the station is off. Handle with care.
• Do not leave the appliance unattended when it is on.
• Do not cover ventilation grills; heat can cause flammable products to ignite.
• Avoid contact of flux with skin or eyes to prevent irritation.
• Be careful with fumes produced during soldering.
• Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves.
• Exercise utmost care with liquid tin waste, which can cause burns.
• This appliance can be used by children over eight years old and persons with reduced capabilities, provided they receive adequate supervision and instruction and understand the hazards. Children must not play with the appliance.
• Maintenance must not be carried out by children unless supervised.

Exploded View

The exploded view illustrates the main components of the DIS-D Premium Desoldering Station. Key parts include the DI Control Unit (DI-1D/DI-2D/DI-9D), the Electric Desoldering Module (MS-A), the Desoldering Iron (DR560-A), and associated cables and filters.

Component references are provided on the diagram.

Spare Parts

A comprehensive list of spare parts is available, with references for each component.

• DI-1D / DI-2D / DI-9D: URE (0015109), TOP (0011435), BOTTOM (0014032), FRONT (0013830), BACK (0003506)
• DI-1D / DI-2D / DI-9D: URE (0017886), TOP (0015266), BOTTOM (0014010), FRONT (0008835), BACK (0015457, 0005652)
• Fuses: DIS-1D 120V FUSE T-2A, DIS-2D 230V FUSE T-1A, DIS-9D 100V FUSE T-2.5A
• Accessories: Various cleaning tools, filters, connectors, and cables are listed with their respective reference numbers (e.g., 0781137, 0965970, C560005, 0019208, 0002600, 0780550, 0786640, 0011283, CL8499, 0011356, 0821830, DR-SD, 0010546, CC3702, 0010433).

Hazardous Substance Content Table

This table details the presence of hazardous substances in product components, adhering to GB/T 26572 standards.

Legend:

O: The content of this hazardous substance in all homogeneous materials of this component is below the limit requirement of GB/T 26572.

X: The content of this hazardous substance in at least one of the homogeneous materials of this component exceeds the limit requirement of GB/T 26572.

Specifications

Premium Desoldering station with Electric Pump (DIS-1D / DIS-2D / DIS-9D)

• Total weight: 6.1 kg (13.4 lb)
• DI-1D: 120V 50/60Hz. Input fuse: 2A. Output: 23.5V.
• DI-2D: 230V 50/60Hz. Input fuse: 1A. Output: 23.5V.
• DI-9D: 100V 50/60Hz. Input fuse: 2.5A. Output: 23.5V.
• Weight (DI Control Unit): 2.153 kg (4.74 lb)
• Dimensions (DI Control Unit): 90 x 105 x 180 mm (3.54 x 4.13 x 7.09 in)
• Output Peak Power: 130W
• Temperature Range: 90 - 450 °C (190 - 840 °F) (±5%)
• Idle Temp. Stability (still air): ±1.5 °C / ±3 °F
• Tip to ground resistance: < 2 ohms
• Tip to ground voltage: < 2mV RMS
• Ambient operating temp: 10 - 40 °C (50 - 104 °F)
• Connections: USB-B / Peripherals connectors

MS-A Module

• Weight: 1.19 kg (2.63 lb)
• Dimensions: 145 x 55 x 225 mm (5.71 x 2.17 x 8.86 in)
• Vacuum: 75% / 570 mmHg / 22.4 inHg
• Flow rate: 9 SLPM
• Ambient operating temp: 10 - 40 °C (50 - 104 °F)

Complies with CE standards. ESD protected housing.

Warranty

JBC's 2-year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear or misuse.

For the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.

Register your warranty within 30 days of purchase at: www.jbctools.com/productregistration

This product should not be thrown in the garbage. In accordance with the European directive 2002/96/EC, electronic equipment at the end of their life must be collected and returned to an authorized recycling facility. ?? ♻️

Manuals in other languages are available on the JBC website.

Visit: www.jbctools.com