JBC DDSE 2-Tool Rework Station
Plug & Play Guide
Product Overview
The JBC DDSE is a 2-Tool Rework Station designed for efficient and versatile desoldering and soldering tasks. This guide provides essential information for setup and operation.
Product References
This Plug & Play Guide corresponds to the following references:
- DDSE-9QE (100 V)
- DDSE-1QE (120 V)
- DDSE-2QE (230 V)
Packing List
The following items are included according to the purchased station reference:
| Item | Reference | Quantity |
|---|---|---|
| DDE 2-Tool Control Unit | Ref. DDE-9C (100 V), DDE-1C (120 V), DDE-2C (230 V) | 1 unit |
| T245 General Purpose Handle | Ref. T245-A | 1 unit |
| DR560 Desoldering Iron | Ref. DR560-A | 1 unit |
| MSE Electric Desoldering Module | Ref. MSE-B | 1 unit |
| ADS Stand for T210 & T245 Handles | Ref. AD-SF | 1 unit |
| DRS Stand for DR560 | Ref. DR-SF | 1 unit |
| SCH Cartridge Holder | Ref. SCH-A | 1 unit |
Installation
Follow these steps to install your DDSE 2-Tool Rework Station:
Connecting the Control Unit and Desoldering Module
The DDE 2-Tool Control Unit is the central hub. The MSE Electric Desoldering Module connects to the mains power supply via its power cord. The control unit itself also receives mains power.
Diagram Description: The DDE Control Unit features ports labeled PORT 1, PORT 2, and PERIPHERALS. The MSE module has IN and OUT ports and connects to the DDE unit. A power cord is included with the DDE Control Unit.
Connecting Tools and Accessories
The T245 General Purpose Handle connects to PORT 1 of the DDE Control Unit using a Stand Cable (Ref. 0024227). The DR560 Desoldering Iron connects to PORT 2 using another Stand Cable (Ref. 0024227). The ADS Stand is for the T245 Handle, and the DRS Stand is for the DR560 Iron. A Module Cable (Ref. 0024228) connects the MSE module. A Suction Filter (Ref. 0821830) is also part of the desoldering setup. Connections can also be made to other peripherals or a Pedal P005.
Diagram Description: The installation diagrams visually depict the DDE Control Unit with its ports. Cables connect the T245 Handle and DR560 Iron to the unit. Stands are positioned next to their respective tools. The MSE module is shown connected, along with the suction filter.
Specifications
| Attribute | Value |
|---|---|
| Product | DDSE 2-Tool Rework Station |
| References | DDSE-9QE (100 V), DDSE-1QE (120 V), DDSE-2QE (230 V) |
| Package Dimensions (L x H x W) | 525 x 318 x 347 mm / 20.67 x 12.52 x 13.66 in |
| Package Weight | 13.12 kg / 28.93 lb |
Complies with CE standards. ESD safe.
Warranty and Compliance
Information regarding the warranty of each product can be found on the final page of its instruction manual.
This product must not be thrown in the garbage. In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility.
