BlackVue DR970X Box-2CH Plus Series Installation and Usage Guide

Rear IR Camera Installation

Step C: Align the tamperproof bracket with the mount bracket. Use the provided Allen wrench to tighten the screw. Do not fully tighten the screw at this stage, as it should be done after attaching the camera to the rear windshield.

Step D: Peel off the protective film from the double-sided tape and attach the rear IR camera to the front windshield.

Step E: Adjust the angle of the lens by rotating the body of the rear IR camera.

Step F: Use the pry tool to lift the edges of the rubber window sealing and/or molding and tuck in the rear IR camera connection cable.

Diagram Description: The diagram shows the routing of the camera connection cable and power cord within a car's interior, from the rear camera mounted on the windshield to the main unit located elsewhere.

GNSS Module Installation and Pairing

Step A: Connect the GNSS Module to the main unit box and attach it to the edge of the windshield.

Step B: Insert the cables into the cable cover and connect them to the USB socket.

Diagram Description: Illustrations show the GNSS module being connected to the main unit and then positioned on the windshield. Another illustration depicts cables being inserted into a cable cover and connected to a USB port.

BlackVue Connectivity Module (CM100GLTE) Installation (Optional)

Install the connectivity module at the top corner of the windshield. Ensure the windshield is clean and dry before installation.

Warning: Do not install the product in a location that obstructs the driver's field of vision.

Step A: Turn off the engine.

Step B: Unscrew the bolt securing the SIM slot cover on the connectivity module. Remove the cover and use the SIM eject tool to unmount the SIM slot. Insert the SIM card into the slot.

Step C: Peel off the protective film from the double-sided tape and attach the connectivity module to the top corner of the windshield.

Step D: Connect the main unit (USB port) and the connectivity module cable (USB).

Step E: Use the pry tool to lift the edges of the windshield trim/molding and tuck in the connectivity module cable.

Note: SIM card must be activated to use LTE service. Refer to the SIM Activation Guide for details.

Diagram Description: The diagrams illustrate the process of installing the CM100GLTE module, including SIM card insertion and connection to the main unit, with cable routing shown within the car's interior.

Power Cable Installation

Cigarette Lighter Power Cable Installation

Step A: Plug the cigarette lighter power cable into the cigarette lighter socket of your car and the main unit.

Step B: Use the pry tool to lift the edges of the center console and tuck in the power cord.

Diagram Description: Illustrations show the cigarette lighter power cable being plugged into the car's socket and the main unit, and the cable being neatly tucked away.

Hardwiring for Main Unit

The Hardwiring Power Cable utilizes the automotive battery to power the dashcam when the engine is off. It includes a low voltage power cut-off function and a parking mode timer to protect the battery from discharge. Settings can be adjusted via the BlackVue App or Viewer.

Step A: To hardwire, first locate the fuse box to connect the hardwiring power cable.

Note: Fuse box locations vary by manufacturer and model. Refer to the vehicle owner's manual for details.

Step B: After removing the fuse panel cover, identify a fuse that powers on when the engine is turned on (e.g., cigarette lighter socket, audio) and another fuse that remains powered on after the engine is turned off (e.g., hazard light, interior light). Connect the ACC+ cable to the fuse that powers on after engine start, and the BATT+ cable to the fuse that remains powered on after the engine is turned off.

Note: To utilize the battery saver feature, connect the BATT+ cable to the hazard light fuse. Fuse functions may differ by manufacturer or model. Refer to the vehicle owner's manual for details.

Step C: Connect the GND cable to a metal ground bolt.

Step D: Connect the power cable to the DC in terminal of the main unit. The BlackVue will power up and begin recording. Video files are stored on the microSD card.

Note: Upon first use, the dashcam automatically loads the firmware onto the microSD card. After firmware loading, settings can be customized using the BlackVue app on a smartphone or the BlackVue Viewer on a computer.

Step E: Use the pry tool to lift the edges of the center console and tuck in the hardwiring power cable.

Diagram Description: Diagrams illustrate the hardwiring process, including identifying fuses, connecting ACC+ and BATT+ cables, grounding the unit, and connecting the power cable to the main unit, with cable routing shown.

Using the BlackVue App

App Overview

The BlackVue app provides access to product information, popular video uploads, and live views shared by other users. Key features include:

• Explore: View the latest product and marketing information, and watch popular video uploads and live views shared by BlackVue users.
• Camera: Add and remove cameras, watch recorded videos, check camera status, change settings, and use Cloud functions for cameras in the list.
• Event map: View events and uploaded videos on a map shared by BlackVue users.
• Profile: Review and edit account information.

Image Description: Screenshots of the BlackVue app interface are shown, including the main dashboard, camera list, and various feature sections like Explore, Camera, Event Map, and Profile.

Registering a BlackVue Account

Step A: Search for the BlackVue app in the Google Play Store or Apple App Store and install it on your smartphone.

Step B: Log in / Create an account:

1. Select 'Get Started' and proceed to the Log-In page.
2. If you have an account, select 'Log in with Email'. Otherwise, tap 'Create account'.
3. During sign-up, you will receive an email with a confirmation code. Enter this code to complete account creation.

Image Description: The process of registering a BlackVue account is illustrated, showing the app's login and account creation screens.

Adding a BlackVue Dashcam to the Camera List

Choose one of the following methods to add your BlackVue dashcam:

1. Add via Seamless Pairing:

1. Select 'Camera' in the Global Navigation Bar.
2. Find and press '+ Camera'.
3. Select 'Seamless Pairing'. Ensure your smartphone's Bluetooth is turned on.
4. Choose your BlackVue dashcam from the detected camera list.
5. To connect to the main unit, scan the QR code on the front unit.
6. Congratulations! Your camera is now connected.

2. Add Manually:

If you prefer to connect manually, press 'Add camera manually' and follow the on-screen instructions for connecting your phone to the camera.

Note: Bluetooth and/or Wi-Fi direct has a connection range of 10m between your dashcam and smartphone. The dashcam SSID is printed on the connectivity details label attached to your dashcam or inside the product box.

Image Description: Step-by-step visuals guide the user through adding a dashcam via seamless pairing, including selecting connection methods, scanning QR codes, and confirming connection.

Connect to BlackVue Cloud (Optional)

This step can be skipped if you do not have a mobile Wi-Fi hotspot, BlackVue connectivity module, or do not wish to use the BlackVue Cloud service.

A mobile Wi-Fi hotspot (portable Wi-Fi router), BlackVue connectivity module (CM100GLTE), a car-embedded wireless internet network, or a nearby Wi-Fi network can be used to connect to BlackVue Cloud. This allows you to see your car's location and the dashcam's live video feed in real-time.

For more information, refer to the BlackVue App manual at https://cloudmanual.blackvue.com/.

D. Cloud Connection Methods:

D-1. Wi-Fi hotspot:

1. Select 'Wi-Fi hotspot'.
2. Choose your Wi-Fi hotspot from the list, enter the password, and tap 'Save'.

D-2. SIM card (Cloud connectivity using CM100GLTE):

Ensure your connectivity module is installed as per the CM100GLTE package manuals (sold separately). Follow these steps for SIM registration:

1. Select 'SIM card'.
2. Configure the APN settings to activate the SIM card. For detailed information, consult the 'SIM activation guide' or visit the BlackVue Help Center: https://helpcenter.blackvue.com/ -> SIM Activation Guide.

Note:

• When connected to the internet, BlackVue Cloud features like remote Live View, Video playback, Real-time location, push notifications, Auto-upload, and remote Firmware updates are available via the BlackVue app and Web Viewer.
• For BlackVue Cloud Service via LTE network, the SIM card must be activated for Internet access.
• If both LTE and Wi-Fi hotspot are available, Wi-Fi hotspot is prioritized. To prioritize LTE, remove Wi-Fi hotspot information.
• Some Cloud features may be affected by high temperatures or slow LTE speeds.

Image Description: The app screens show the process of connecting to the cloud via Wi-Fi hotspot and SIM card, including network selection and APN settings.

Quick Settings (Optional)

Customize your firmware language, time zone, and speed unit. You can skip this for later or press 'Next'.

1. Select the firmware language for your BlackVue dashcam and press 'Next'.
2. Select your location's time zone and press 'Next'.
3. Select your preferred speed unit and press 'Next'.
4. Press 'More settings' to access all settings or 'Save'. Your dashcam will format the SD card to apply settings. Press 'OK' to confirm.
5. BlackVue dashcam installation is complete.

Important! All saved videos are about to be deleted. Tap 'Cancel' and back up important files if needed. Whenever saving settings after changing the time zone, the SD card is initialized and all stored files are deleted.

Image Description: App screens illustrate the quick settings process for language, time zone, and speed unit selection, followed by a confirmation screen for saving settings and formatting the SD card.

Playing Video Files and Changing Settings

After installation, follow these steps to play video files and change settings:

A. Select 'Camera' on your Global Navigation Bar.

B. Tap your dashcam model in the camera list.

C. To play video files, press 'Playback' and tap the desired video.

D. To change settings, press the settings icon ⚙️.

Image Description: App screenshots show the camera list, individual camera details, playback options, and the settings menu.

Wi-Fi Mode

What's "Wi-Fi mode"?

The "Wi-Fi mode" in the BlackVue App is designed for users who prefer not to create an account or need to connect their dashcam directly to the app.

How to use "Wi-Fi mode" in the BlackVue App:

1. Open the App and navigate to the Onboarding page.
2. Locate and tap the "Wi-Fi mode" button.
3. This will take you to the Cameras list page.
4. In the Cameras list page, tap the '+' button.
5. Select the connection method: 'Seamless pairing'.
6. Select your camera from the list.
7. Verify your camera by scanning the QR code.
8. Congratulations! Your camera is already connected.
9. In the Camera list page, tap on your Camera, and a 'Camera Connection' pop-up will appear. Tap 'Join'.
10. You will then be directed to the Video List page where you can access all videos.

Image Description: The app screens illustrate the process of using Wi-Fi mode, from selecting the mode to connecting the camera via seamless pairing and accessing the video list.

Available Features in Wi-Fi Mode

• Camera Settings: Adjust firmware settings including Basic (Time, Video, Recording mode), Sensitivity (G-sensor, Motion detection), System (LED, Text Overlay, Speed alert), Wi-Fi (Log in, Wi-Fi on/off), Cloud (Cloud on/off, network), and Firmware language.
• Rename Camera: Change the name of the camera.
• Remote Firmware Update: Download and update the camera's firmware.
• Reboot Camera: Optimize dashcam performance.
• Format MicroSD card: Clean the file list by removing unwanted files.
• Delete: Remove the camera from the app.

Image Description: App screenshots show the camera's recorded videos and the menu for accessing various features like Camera Settings, Rename Camera, Remote Firmware Update, Reboot Camera, Format MicroSD card, and Delete.