Maxcom FW44 Gold & Silver 2 Quick Start Manual

Getting Started

1. Charge the watch using the provided cable before first use.
2. Download and install the control app on your phone: Scan the QR code or search for "GloryFit" in the Play Store/App Store.
3. During installation, authorize the app to access phone resources (contacts, SMS, camera, etc.).
4. Set your age, weight, and height in the app and set activity goals.
5. Enable on your phone: Bluetooth and GPS (for Android) or Bluetooth (for iOS).

Connecting the Watch to the App

1. Tap the "Device" icon in the app's bottom menu.
2. Select "Select device" at the top of the screen.
3. After searching for the FW44 watch, tap "Connect". A successful connection will automatically set the watch's date and time.

Troubleshooting Connection Issues

If the connection fails:

• Check if GPS is enabled (Android phones).
• Navigate to Phone Settings > Apps & notifications > App permissions > Background activity and notification authorization.
• Verify if the watch/band is already connected to the phone via Bluetooth. If so, go to Bluetooth settings > Forget device, then reconnect via the app.
• Optional (for some Android versions): On the main screen, press and hold the app icon to access the app's menu > App info > Battery usage/Battery > (settings may vary by manufacturer) Unlimited / Allow foreground work, etc.
• If Bluetooth is not connecting or cannot connect:
• Reset the watch and reconnect.
• Restart the phone and reconnect.
• Disconnect all other Bluetooth devices.

Final Notes

• For reminders/messages (SMS, Messenger, Skype, Twitter, etc.) on the watch: Allow the app to access contacts, messages, and selected social media within the app.
• On Android phones, this may also be required in phone settings (Settings > Apps > Permissions).
• If the watch disconnects from the phone: Check phone power management settings to ensure the control app runs in the background without battery saving restrictions (typically: Settings > Battery Management > App > (app name) > Do not save).

Complete Instructions and Information

For complete instructions and further information, visit www.maxcom.pl.

Technical Specifications

Environmental Information

DO NOT DISPOSE OF BATTERIES OR BATTERIES IN FIRE

This device is marked in accordance with European Directive 2012/19/CE and Polish law on waste electrical and electronic equipment, indicated by the crossed-out wheeled bin symbol. This marking informs that the equipment cannot be disposed of with other household waste after its useful life. Proper management of used electrical and electronic equipment contributes to avoiding harmful consequences for human health and the environment resulting from the presence of hazardous components, as well as improper storage and treatment of such equipment.

The device contains a lithium-ion battery. Used batteries are harmful to the environment. They should be stored in a specially designated place in a suitable container, in accordance with current regulations. Batteries and accumulators must not be disposed of with municipal waste; take them to a collection point.

Manufacturer Information and Compliance

MAXCOM S.A.

43-100 Tychy

ul Towarowa 23a

POLAND

Tel: +48 32 327 70 89

Fax: +48 32 327 78 60

Website: www.maxcom.pl

Email: office@maxcom.pl

CE RoHS Compliant

MAXCOM SA declares that the radio equipment type FW44 complies with Directive 2014/53/UE and Directive 2011/65/UE (RoHS). The full text of the EU declaration of conformity is available at: www.maxcom.pl/pl/content/23-deklaracje

Disclaimer

Note: The manufacturer is not responsible for any consequences caused by improper use, abuse, or non-observance of the instructions. This manual is for informational purposes only. Some described functions and options may vary depending on software and country. The manufacturer reserves the right to make changes or modifications without prior notice.