Zebronics ESCAPE 80 Wireless Neckband Earphone
User Manual
Thank you for purchasing the ZEB-ESCAPE 80 wireless neckband earphone. Please read this user manual carefully before operation and save it for future reference.
Note:
- Please fully charge the product with a power adapter output rated DC 5V before first-time usage.
- Avoid self-disassembly of the product, as it may void the product's warranty.
To know more about Terms and conditions for warranty policy, please visit https://zebronics.com/pages/warranty-policy
Caution:
Listening at high volume can cause hearing impairment. Please limit your usage time at high volume.
Features
- Upto 18h* backup
- MagSnap
- 10mm Drivers
- Call Function
- Voice assistant support
- BT v5.3
- Flexible Neckband
- Type-C Charging
- Built-In Rechargeable Battery
- Rapid Charging (10min charge for 100min* use)
- Environmental Noise Cancellation (ENC)
- Gaming Mode (Low Latency)
- Volume & Media control
Specifications
| Model | ZEB-SNB 1 |
| BT Version | v5.3 |
| BT Profile | AVRCP, A2DP |
| Drive size | 10mm |
| Speaker impedance | 32Ω |
| Playback time | 18h* |
| Charging time | 1.5 h |
| Standby Time | 200 h |
| Talk Time | 20h* |
| Net. weight | 25g |
* at 50% volume
Package contents
- Neckband: 1 U
- Charging Cable: 1 U
- Eartips: 4 U
- QR Code Guide: 1 U
Product Representation
The product has three buttons:
- + Button: Short press for Volume up, Long press for Next track.
- MFB Button (Middle): Single press for Play/Pause. Press and hold for 3 seconds for Voice assistant. Long press and hold for Power On/ Power off. When calling: Single press to Accept/End the ongoing call, Double press for direct incoming call rejection, Double press for Redial.
- - Button: Short press for Volume down, Long press for Previous track.
Usage Instruction
Bluetooth Pairing Instructions:
- STEP 1 - Press and hold the MFB button to power ON the earphones.
- STEP 2 - Switch ON the BT in your mobile phone & search for the BT name "ZEB-ESCAPE 80".
- STEP 3 – Once the BT name is visible in your mobile phone, tap to connect it.
Activating Smart Phone's Voice Assistant
When the neckband is connected to a mobile phone, press and hold the MFB Button for 3 seconds to activate the voice assistant. Note: The smartphone should have an active internet connection to use the voice assistant function.
Call Function:
- Single press the MFB button to attend/end the call.
- Double press to reject the incoming call.
- Double press the MFB button for Redialing.
LED Indication
| Indicator | Status |
|---|---|
| 1. Charging the Neckband | Red light glows (charging), Blue Light Glows (Fully charged) |
| 2. BT pairing | Red and blue blinks – BT discovery mode. Blue blinking - BT paired successfully. |
| 3. Power on / off | Blue Blinking – while power On. Red Blinking – while power Off. |
Charging Instruction
Connect the Type-C charging cable to the charging port of the Neckband & connect the other end to the DC 5V adapter.
