Zebronics ZEB-YOGA 90 PRO Wireless Neckband Earphone
User Manual
Introduction
Dear Customer, Thank you for purchasing ZEB-YOGA 90 PRO Wireless Neckband Earphone. Please read this user manual carefully before operation & save this user manual for further reference.
Note: Avoid the use of this product at the high-temperature and high humidity environment. Avoid self-disassemble of product or it will result in the failure of warranty. Please charge the product with a power adapter output rated DC 5V.
Caution: Listening at high volumes can cause hearing impairment. Please limit your usage time at high volumes.
Features
- Wireless BT earphone with Neckband
- Volume/Media Control
- Magnetic Earpiece
- Call Function
- Voice Assistant support
- Dual Pairing
- Built-In Rechargeable Battery
- Water Resistant
Specifications
| BT Version | 5.0 |
| Supported BT Profile | HFP/HSP/A2DP/AVRCP |
| Driver Size | 10mm |
| Speaker Impedance | 16Ω |
| Playback Time | 9H* |
| Charging Time | 1H |
| Talk Time | 9H* |
| Standby Time | 120H |
| Net Weight | 30g |
*at 50% volume
Package Contents
| Neckband | 1 unit |
| Ear Buds | 2 Pairs |
| Charging Cable | 1 unit |
| User Manual | 1 unit |
Product Representation
Ear Buds
Vol-/Prev track
Multifunction button
Vol+/Next track
Type C charging port
Charging Instruction
Connect Type C cable to the charging port of the earphones & connect the other end of the cable to a 5V DC adapter.
LED Indication:
- Charging Indication: RED LED glows.
- Full Charge Indication: RED LED turns BLUE.
- BT Discover Mode: Red & Blue LED blinks simultaneously.
- When connected to a phone: Blue LED will blink once in an interval of 5 secs.
Usage Instruction
Bluetooth Pairing Instruction:
- Press and hold the MFB to Power ON the earphones and to take them into pairing mode with the Red and Blue LED blinking alternatively.
- Switch on Bluetooth of your phone & search for the BT name "ZEB-YOGA 90 PRO".
- Once the BT name is shown in the phone, tap to connect it.
Button Usage:
- MFB: Press once to Play/Pause audio during media playback. Press once to answer an incoming call. Press it again to hang up. Long press to reject during an incoming call.
- +: Long press to go to next track. Single press to increase volume.
- -: Long press to go to prev. Track. Single press to decrease volume.
Activating Smart phone's Voice Assistant
When the earphones are connected to a smart phone, press and hold the multifunctional button for 2 secs to wake up the phone's voice assistant.
NOTE: Smart phone must have an active internet connection to use the voice assistant function.
