Zebronics ZEB-YOGA 9 Wireless Neckband Earphone
Always Ahead
Introduction
Thank You for purchasing the ZEB-YOGA 9 Wireless neckband earphone. Please read this user manual carefully before operation and save it for future reference.
Important Notes
- Please fully charge the product with a power adapter output rated DC 5V before first time usage.
- Do not self-disassemble the product, as it will result in the failure of warranty.
- Make sure not to use this product in any high-temperature or high-humidity environment.
Caution: Listening at high volume can cause hearing impairment. Please limit your usage time at high volume.
Features
- Wireless BT earphone with Neckband
- Volume/Media Control
- Call Function
- Voice Assistant support
- Built-In Rechargeable Battery
- Flexible Neckband
- Type-C Charging
- Environmental Noise Cancellation (ENC)
- Gaming Mode (Low Latency)
- Dual Pairing
- RGB LED in Gaming Mode
- Splash proof
- Metallic & Magnetic Earpieces
Specifications
| BT Version | 5.2 |
| Supported BT Profile | HSP / SPP / A2DP / AVRCP |
| Drive size | 10mm |
| Speaker impedance | 32Ω |
| Playback time | 45h* |
| Charging time | 1.5 h |
| Talk time | 23-25h |
| Standby time | 240h |
| Net. weight | 30g |
*at 50% volume
Package Contents
- Neckband: 1 U
- Eartips: 4 U
- Charging cable: 1 U
- QR Code Guide: 1 U
Usage Instruction
Bluetooth Pairing Instructions
- Press and hold the MFB 2 to power ON the earphones and to take them into pairing mode with Green LED blinking alternatively.
- Switch ON the Bluetooth in your mobile phone & search for the BT name “ZEB-YOGA 9”.
- Once the BT name is visible in your mobile phone, tap to connect it.
Product Representation
The product features a flexible neckband design. On one side of the neckband, there are two primary control buttons: MFB 2 and MFB 1. On the opposite side, there are volume control buttons labeled "-" and "+". A Type-C charging port is also integrated into the neckband.
- MFB 2: Used for Power ON/OFF, Wake up Voice assistant.
- MFB 1: Used for Play/Pause, Call Answer/Call hangup, Call Reject.
- Volume +/- buttons: Short press for Volume Up/Down, Long press for Next/Previous track.
Button Usage
- MFB 1 Single Press: Play/Pause/ Call Answer/Call hangup
- MFB 1 Long Press: Call Reject
- MFB 2 Double Press: Switch b/w Gaming / Music mode
- MFB 2 Press & Hold: Power ON/OFF / Wake up Voice assistant
- Short Press +/-: Volume Up and Down
- Long Press +/-: Next / Previous track
Activating Smart Phone's Voice Assistant
When the neckband is connected to a mobile phone, press and hold the MFB for 2 seconds to activate the voice assistant.
Note: Smart phone should have an active internet connection to use the voice assistant function.
Call Function
- Short press the MFB 1 to attend or end the call.
- Press and Hold the MFB 1 for 2 seconds to reject the incoming call.
Charging and LED Indication
Charging Instruction
Connect the Type-C charging cable to the charging port of the earphones & connect the other end to the DC 5V adapter.
LED Indication
- Charging indication: Green LED glows
- Full charge indication: LED turns Off
- BT Discover mode: Green LED blinks rapidly till it gets paired.
