Tecware B68+ 3-Mode Wireless Mechanical Keyboard
Quick Start Guide
Fn Shortcut Keys
The following are shortcut key combinations using the Fn key:
Fn + 1 through 12 = F1 through F12
Fn + I = Print Screen
Fn + O = Scroll Lock
Fn + P = Pause
Fn + J = Insert
Fn + K = Home
Fn + L = End
Fn + Alt = Menu
Fn + ↑ = LED Lighting Brightness Increase
Fn + ↓ = LED Lighting Brightness Decrease
Fn + → = LED Lighting Speed Increase
Fn + ← = LED Lighting Speed Decrease
Fn + Right Ctrl = LED Mode Switch
Fn + Right Shift = LED Color Switch (Red, Green, Blue, Yellow, Purple, Blue and White)
Fn + Esc (Hold down 5 sec) = Reset Settings
Fn + Win = Windows Key Lock
LED Modes
Various LED modes can be triggered by Fn + Right Ctrl Keys:
- ① Snake
- ② Spectrum
- ③ Reactive
- ④ Sine wave
- ⑤ Static
- ⑥ Breathing
- ⑦ Color Cycle
- ⑧ Reactive Sideways
- ⑨ Reactive Burst
- ⑩ Windmill
- ⑪ Custom 1, 2
Note: The CAPSLOCK key acts as a secondary FN key when held down by default. To turn this function off, please press "FN+Left ALT " once.
Connectivity Switch
(Located at the back of the keyboard)
Toggle Left for BT mode, Middle for WIRED MODE, Right for 2.4G MODE.
BT Connection: (Connect/Store up to 3 Devices)
The Tab key will be backlit in White when in BT mode, and the Esc key will blink to search connection.
- Fn + Q: Long press (3 sec) for pairing mode between the BT device. Esc Key will blink fast when discoverable. When pairing is complete, ESC key will stop blinking.
- Fn + W: Single press to connect/disconnect to paired device. Esc Key will stop blinking when connection is established.
- Fn + E: Single press to connect/disconnect to paired device. Esc Key will stop blinking when connection is established.
Charging
FN + Backspace displays battery power level. Keys 1~0 light up in green to show battery level.
- Blinking Blue: Keyboard battery is charging. Backspace key will stop blinking when fully charged.
- Blinking Red: Low Battery, will stop functioning after 10 seconds.
Connect your USB Wire to charge.
Sleep/Time Out
- The keyboard goes to sleep after 90 seconds when the keyboard is disconnected from the device or the device fails to reconnect.
- The keyboard goes to sleep when the keyboard is inactive for 120 seconds.
Package Contents
- TECWARE B68+ Mechanical Keyboard
- Quick Start Guide
- USB Dongle x 1
- 1.8m Removable USB-C Cable x 1
- Switch Puller x 1
- Keycap Puller x 1
System Requirements
- PC with USB port
- Windows 7/8/10, Mac
Warranty
1 Year. Please contact your local distributor for support.
For more information, visit www.tecware.co