Dewenwils LED Floor Lamp

Packing List

• Column Floor Lamp (A) - 1
• Base (B) - 1
• Screw (C) - 2
• Screwdriver (D) - 1
• Adapter Connector (E) - 1
• Adapter (F) - 1
• Remote Control (G) - 1
• AAA Battery (Installed) (H) - 2
• Instruction Manual (I) - 1

Caution

1. Before assembly, place all parts on a clean flat surface and inspect each part for defects.
2. Inspect wire insulation for any cuts, abrasions, or exposed copper. If defects are found, do not continue assembly and contact customer service immediately.
3. Consult a qualified electrician for any electrical questions.
4. Never drape clothes over the lamp.
5. To reduce the likelihood of tipping over, place the lamp behind furniture and keep children and pets away.
6. Keep packing materials away from children to prevent suffocation and choking.

Assembly Instructions

Before assembly, compare accessories with the packing list to ensure all parts are present. Install the adapter first to check if the product functions as intended.

1. Align the screw holes of the Base (B) with the screw holes at the bottom of the Column Floor Lamp (A) and fix them with Screws (C).
2. Connect the Adapter Connector (E) to the Adapter (F) and spin the lock of the Adapter.
3. Place the floor lamp where needed and plug it into the power supply.

Function

• Signal Receiver (1)
• On/Off Foot Switch (2)
• On/Off Switch (3)
• 16 Colors (4)
• Dimmer -- 5 Brightness Levels (5)
• Color Mode -- FLASH/STROBE / FADE / SMOOTH (6)
• Remote Control (7)
• WiFi Smart Control (8)

Note: Make sure the Remote Control is within line of sight when using any function, as it only transmits a straightforward IR signal to the Signal Receiver (1). The remote control works within 20ft without obstacles; the IR signal cannot pass through glass or walls.

Specifications

• Product Height: 48 IN.
• Base Diameter: 6.9 IN.
• Materials: Plastic & Metal
• Input Voltage: 100-240VAC, 60Hz
• Voltage of Remote: DC 3V (2 x 1.5V AAA Battery)
• Operating Range: 20 FT

WiFi Smart Control Instruction

Software Installation

Scan the QR code or search "Smart Life" in Google Play or the App store to download and install the Smart Life APP.

Register

If you don't have an APP account, register an account or sign in with a verification code by SMS.

1. Tap to enter the registration page.
2. The system automatically recognizes your country/area. You can also select your country code. Enter the mobile number/Email and tap "Next".
3. If you enter the mobile number, enter the verification code in the message and then enter the password. Tap "Confirm" to finish your registration.

Note: Each device can only be connected to one account. Share your device via the APP if anyone else needs to control it.

Connecting the Device

1. Plug the Adapter plug into a socket.
2. Sign in to your account and tap the "Add Device" button on the APP, then choose the "Socket (Wi-Fi)".
3. Reset the Device: If the light is blinking fast, skip the reset step. Otherwise:
   • Option A: Reset via remote control
     • Power on the foot switch.
     • Long press the "ON" button of the remote control for 5 seconds.
     • Ensure the light is blinking fast.
   • Option B: Reset via foot switch
     • Power on the foot switch.
     • Turn the switch on-off-on-off-on-off-on (on-off 3 times).
     • Ensure the light is blinking fast.
4. Select the Wi-Fi network the floor lamp will connect to. Enter the Wi-Fi password and confirm.

Note: Wi-Fi Column Floor Lamp configuration only supports a 2.4GHz Wi-Fi network. If your router supports both 2.4GHz and 5GHz networks, ensure the network names are different and connect to the 2.4GHz network.

After the connection process is completed and the light stops blinking, the Lamp has been connected and is ready for operation. The light color and brightness can be adjusted via the APP.

Note: The APP and Remote Control can be used simultaneously.

One-year Limited Warranty

Dewenwils warrants this product to be free from defects in material and workmanship for a period of one year from the date of purchase. Warranty will be void if damage is due to misuse or improper installation. Please contact Dewenwils if you have any questions. Email: support@dewenwils.com.