Dewenwils Floor Lamp

Thank you for your purchase. Please contact Dewenwils if you have any questions. We will get back to you within 24 hours. Email: support@dewenwils.com. Please attach your Order ID so that we can serve you better.

CAUTION

1. Before assembly, place all parts out on a clean flat surface and inspect each part for defects that may have occurred during shipping.
2. Inspect wire insulation for any cuts, abrasions or exposed copper that may have resulted during shipping. If there are any defects in the wire, DO NOT continue to assemble. Please send an email to our Customer Service immediately (Support@dewenwils.com).
3. Consult a qualified electrician if you have any electrical questions.
4. Never drape clothes over the lamp.
5. To reduce the likelihood of tipping over, we recommend placing the lamp behind furniture and keep children and pets away.
6. To prevent children from suffocating and choking, keep them away from packing materials.
7. Please keep this manual and hand it over when you transfer the product.

Packing List

The packing list includes the following items:

• Part 1: Column Floor Lamp (Quantity: 1)
• Part 2: Base (Quantity: 1)
• Part 3: Adapter (Quantity: 1)
• Part 4: Instruction Manual (Quantity: 1)

A visual representation of the packing list shows:

• Item 1: A tall, slender lamp column.
• Item 2: A circular base for the lamp.
• Item 3: An electrical adapter with a cord and plug.
• Item 4: A folded document, representing the instruction manual.

ASSEMBLY INSTRUCTIONS

Follow these steps to assemble the floor lamp:

1. Screw the Column Floor Lamp (A) clockwise onto the Base (B) until tight.
2. Connect the Adapter connector (D) to the Adapter (C) and then spin to lock (3).
3. Place the floor lamp where you need it and plug into the power supply.

A diagram illustrates the assembly process, showing the column (A), base (B), adapter (C), and connector (D).

FUNCTIONS

Foot Switch & Stepless Dimmable

Short press the foot switch to turn the lamp on/off. Long press to adjust the brightness. After turning the lamp on with a short press, a long press on the foot switch will gradually brighten or darken the light. Remove your foot when the desired brightness is reached.

Memory Function

The floor lamp can remember the last set brightness mode before it was turned off.

Specifications

• Product Height: 57.5 IN
• Base Length: 7.8 IN
• Wire Length: 70 IN
• Materials: Iron, ABS
• Input Voltage: AC100V-240V 60Hz
• Max. Load Power: 17W-3000K-650LM

One Year Limited Warranty

DEWENWILS warrants this product to be free from defects in material and workmanship for a period of one year from the date of purchase. Warranty is void if damage is caused by misuse or improper installation. Email: support@dewenwils.com. Our dedicated customer service team will get back to you within 24 hours.