Lost Vape Centaurus N200 Kit User Manual
Safety Warnings
- Warning for Vulnerable Consumer Groups: This product is not recommended for minors, pregnant or breastfeeding women, or individuals with a risk of heart disease, depression, and asthma.
- Battery Caution: Do not expose the device to extreme temperatures. Do not disassemble the device without Lost Vape's recommendation.
- Tank Attention: Do not dry burn the tank or coil. It is essential to prime a new coil. Simply fill your tank with e-liquid and let it stand for at least 5 minutes before vaping. This allows the cotton to absorb e-liquid. Warranty is void once tanks/coils are opened, used, or filled.
- Warranty: The device is covered by a 3-month warranty from the date of purchase.
- Contacts: For further questions, contact Lost Vape at support@lostvape.com or visit www.lostvape.com.
Main Features
- Unlimited Combination 200W Max Power Output
- Dual 18650 Battery
- Seamless Transparent Matte Shell
- On/Off Toggle Switch
Basic Parameters
CENTAURUS N200 DEVICE
| Dimension | 92.6*52.8*27.6mm |
| Net Weight | 108±5g |
| Battery | Dual 18650 Battery (Not Included) |
| Battery Voltage | 6.0V-8.4V |
| Power Range | 5-200W |
| Charging Voltage | 5V/2A |
| Type-C Cable | Support 5V/2A Charger |
| Body Material | PC & Zinc-Alloy & Stainless Steels |
CENTAURUS SUB OHM TANK
| Dimension | 30.0*56.15mm |
| Tank Capacity | 5ml/2ml (TPD) |
| Tank Material | Glass Tube & Stainless Steels |
| Coil Resistance Supported | 0.1-3.0Ω |
| Compatible With | UB MAX Coils (0.15Ω, 0.2Ω, 0.3Ω) |
Product Description
The Lost Vape Centaurus N200 Kit is a high-performance vaping device featuring a 200W maximum output, powered by dual 18650 batteries, and enclosed in a seamless transparent matte shell.
Components Overview
The kit includes the following components:
- 810 Drip Tip
- Coil
- Glass Tube
- Airflow Control Ring
- Base
- 510 Connector
- Fire Button
- Indicator
- 0.96" TFT Display Screen
- Right/ "+" Button
- Left/ "-" Button
- Switch Button
- Type-C Port
- Battery Cover
Screen Info Overview
The device's screen displays the following information:
- Battery Level
- Wattage
- Wattage Lock Status
- Puff Time
- Resistance
- Puff Counter
- Mode (Normal Mode, DIY Mode)
Basic Operation
Tank Filling
- Twist to open the top cap.
- Refill the tank from the e-liquid filling slot.
- Seal the pod tank after filling.
Coil Installation
- Twist the pod tank out from the base.
- Take out the coil.
- Push the coil back into the pod tank.
- Twist the pod tank back onto the airflow control base.
Airflow Control
Turn the Airflow ring to adjust airflow. Turning it fully to the right restricts airflow. Select your preferred setting.
Turn On/Off
Push the Switch Button to the right to turn ON the device. Push to the left to turn OFF.
Puff Time Display & Puff Count Reset
Puff Time displays 0.0S-9.9S after each vape. The maximum puff count is 9999. To reset the puff count, press and hold the Fire Button & "-" Button for 3 seconds while the device is powered on.
How to Adjust / Lock / Unlock Wattage
1. Short press the Right (+) / Left (-) button to adjust power by step (0-39W: 1W, 40W-98W: 2W, 100W-195W: 5W). Long press for rapid adjustment. The device will display "Max Power" at the limit.
2. Press and hold both the Right (+) and Left (-) buttons for 3 seconds to lock/unlock adjustment settings. The fire button remains operational when locked.
Check the Battery Level
LED indicators flash during vaping or charging to show the battery capacity.
- 0% - 20%
- 20% - 40%
- 40% - 60%
- 60% - 80%
- 80% - 100%
Switch Modes
To switch between Normal Mode and RDA DIY Mode, press the Fire button 3 times within 2 seconds while the device is unlocked.
Description of Warning
- Low Battery: Indicates battery level is 0%. Output will automatically turn off, and the indicator will flash purple 3 times. Please change the battery.
- Check Atomizer: Means no atomizer is detected, or the atomizer resistance is higher than 3Ω. Pressing the fire button shows "Check Atomizer" on the screen, and the indicator flashes purple 3 times.
- Short Circuit: Means the atomizer resistance is lower than 0.08Ω. Pressing the fire button shows "Short Circuit" on the screen, and the indicator flashes purple 3 times.
- Too Hot: The device shuts down when the internal board temperature exceeds 85°C. The screen shows "Too Hot", and the indicator flashes purple 3 times. The device can be used again when the temperature returns to 65°C.
- Over 10s: Output automatically shuts off and the screen shows "Over 10s" with purple light 3 times when vaping continuously for over 10 seconds.
lostvapetech | Instagram, Facebook, TikTok | Linktree
Lost Vape – As a global high-tech brand, its cutting-edge technology and sleek designs have earned the brand a professional and famous impression worldwide, making it a go-to choice for vapers who value style, performance, and safety.
