Powertech Phone Cradle with 15W Wireless Charger

Box Contents:

• 1 x Wireless Charger
• 1 x Suction Cup Mount
• 1 x Air Vent Mount
• 1 x USB-C Power Cable

Product Diagram:

A detailed diagram illustrates the components of the phone cradle. Key parts labeled include: 'Wireless Charging Pad', 'Phone Clamps', 'Lock Button', 'Adjustable Knob', 'Lock/Release Button', 'USB-C Power Socket', 'LED Status Indicator', and 'Adjustable Holder'.

Installation:

Suction Cup Mount:

1. Unscrew the adjustable mounting ring knob from the phone cradle. Place it over the end of the suction cup mount.
2. Attach the phone cradle to the suction cup mount and tighten the adjustable mounting ring knob so the cradle and suction cup mount are secured tightly.
3. Peel the protective plastic from the bottom of the suction cup mount and place it firmly on your car's windscreen or dashboard.

Air Vent Mount:

1. Screw the adjustable vent mount clockwise to loosen the adjustment mechanism, allowing the hook to extend.
2. Place the hook onto your car's air vent and latch it securely. Screw the adjustment knob anti-clockwise to tighten the mount to the vent.
3. Unscrew the adjustable mounting ring knob from the phone cradle. Place it over the end of the air vent mount and tighten the knob securely to attach the cradle.

Power:

1. Insert the included USB power cable into a 5VDC/9VDC USB car charger (charger not included).
2. Insert the USB-C plug into the USB power socket of the phone cradle.
3. The LED status indicator will turn green ? once the unit has been powered on.

Note: For optimal fast charging, it is suggested to use a Qualcomm® Quick Charge™ 3.0 USB car charger. Please verify if your device supports quick charge technology; otherwise, it will charge at 5W.

Operation: Charging:

1. Press the lock/release button to open the phone clamps ?.
2. Slide down the adjustable holder located at the bottom of the cradle and slide your smartphone into the cradle.
3. The LED status indicator will turn blue ? once charging has started.

Note: You may need to adjust the position of the adjustable holder at the bottom of the cradle. The wireless charging pads' optimal position can vary depending on the type of smartphone.

Troubleshooting:

Safety:

1. Do not place any metal objects, magnets, magnetic stripe cards, or metal phone cases between the mobile device and the charger, as this may prevent proper operation.
2. Keep the wireless charger at least 20cm away from any implantable medical devices, such as pacemakers or cochlear implants, to avoid interference with the medical device.
3. Do not attempt to open the case of the wireless charger to avoid damage and personal injury.
4. Keep the wireless charger away from high temperatures, as this may cause damage to internal components like the speaker and battery.
5. Do not expose the wireless charger to water, moisture, or liquids to prevent unit damage.

Specifications:

• Input: 5VDC @ 2A, 9VDC @ 1.7A
• Voltage Output: 5VDC, 9VDC
• Current Output: 5V @ 1A (5W), 9V @ 0.8A (7.5W), 9V @ 1.1A (10W), 9V @ 1.66A (15W)
• Output Power: 5W/7.5W/10W/15W
• Charging Efficiency: 73% (Max)
• Charging Distance: ≤7mm
• Battery: 3.7V Li-ion, 60mA
• Battery Standby Time: Up to 30 Days
• Dimensions: 119(H) x 75(W) x 34(D)mm

Distributed by:

Electus Distribution Pty. Ltd.
46 Eastern Creek Drive, Eastern Creek
NSW 2766 Australia

Ph: 1300 738 555
Int'l: +61 2 8832 3200
Fax: 1300 738 500

www.electusdistribution.com.au