Taurus Crossback 29.6 Lithium Inedit 29.6 Wash

Product Overview and Components

The Taurus Crossback 29.6 Lithium Inedit 29.6 Wash is a versatile stick vacuum cleaner. The main components are identified by letters:

• A: Ergonomic handle
• B: ON/OFF button for brush (2 speeds: ECO/TURBO)
• C: Battery charge indicator
• D: Handle
• E: Device housing
• F: Handheld vacuum
• G: Folding handle button
• H: Handheld vacuum release button
• I: ON/OFF button for brush
• J: Dust container release button
• K: Motor protection filter
• L: Turbobrush attachment
• M: Rotating brush
• N: Wheels
• O: Wall mount
• P: Charger
• Q: Accessories: Tube and upholstery brush
• R: Accessory hook
• S: Mop attachment (*)
• T: Mop (*)

(*) Only for the Inedit 29.6 Wash model.

If your device does not include the accessories mentioned above, they can be purchased separately from the Technical Service.

Usage and Maintenance

Important Safety Precautions:

• Do not use the device if accessories or worn parts are not properly attached.
• Do not use the vacuum cleaner to collect water or other liquids.
• Do not exceed the MAX level for dust collection.
• This device is designed for domestic use only, not for professional or industrial use.
• Store the device in a place inaccessible to children and individuals with limited physical, sensory, or mental capabilities, or those lacking experience or knowledge of this type of equipment.
• Use the device and its accessories strictly according to these instructions. Using it for other purposes may cause danger.
• Do not use on surfaces that may contain metallic elements such as nails.
• Never vacuum objects that are hot or sharp (cigarette butts, ash, nails...).
• Never open the battery.
• Do not use the device to dry stuffed animals or pets.
• Only charge the batteries with the charger provided by the manufacturer. Using a charger for other types of batteries could cause an explosion or fire.
• Only use the type of batteries for which the device is designed. Using a different type of battery may cause an explosion or fire.

Installation:

• Ensure all packaging material has been removed from the device.

Wall Mount Installation:

• The device is equipped with a wall mount (O).
• Secure the wall mount to the wall using appropriate dowels, screws, or adhesive.
• Ensure the mount is securely fastened to support at least double the weight of the device.
• Place the device onto the wall mount.

Battery Charging:

• A new battery is not fully charged and requires charging to maximum before first use.
• Charge batteries at room temperature between 4°C and 40°C.
• Connect the charger (P) to the power outlet.
• Full charging takes approximately 4 to 6 hours. Never exceed the charging time.
• A red indicator light shows when the battery is charging. A green light indicates charging is complete.
• Remove the battery from the charger after the specified time.
• After charging the battery, disconnect the device from the power supply.
• Note: Do not use the device while it is charging in the dock.

How to Use:

• Turn on the device using the ON/OFF button (B).
• Select the appropriate speed: Press once for ECO speed, twice for TURBO speed.

Using the Handheld Vacuum:

• Press the handheld vacuum release button (H) on the main housing (E) of the brush vacuum to detach it. (Fig. 2)
• Turn on the device using the ON/OFF button (I).

Attaching the Mop (*):

• Fill the mop tank with water and, if necessary, a few drops of detergent.
• Attach the water tank to the rear part of the vacuum cleaner's nozzle until you hear a 'click'. Then, press the button to open the water flow. (Fig. 3b)
• The mop can also be used dry.
• Note: The mop can be washed in a washing machine.

Attaching Accessories to the Handheld Vacuum:

• Press the handheld vacuum release button (H) on the main housing (E) of the brush vacuum to detach it. (Fig. 2)
• The handheld vacuum is designed to allow the attachment of various accessories. Choose the combination that best suits your needs. (Fig. 3)
• Brush nozzle: Equipped with a brush at its tip, which allows for surface brushing while operating.
• Crevice nozzle: Specifically designed for crevices and hard-to-reach corners.

Parking Position:

• The device features a 'vertical parking' function for easy and convenient storage.

Folding Handle:

• This device has a folding handle for easier storage. (Fig. 4)

Cleaning

• Disconnect the device from the power supply and allow it to cool down before cleaning.
• Clean the device with a damp cloth, slightly moistened with a few drops of detergent, and then dry it.
• Do not use solvents, products with pH factors like chlorine, or corrosive agents for cleaning.
• Do not immerse the device in water or any other liquid, or place it under a running tap.

Emptying the Dust Container:

• Empty the container when its transparent side shows it is full, or when suction power noticeably decreases.
• Press the handheld vacuum release button (H) on the main housing (E) of the brush vacuum. (Fig. 2)
• Remove the dust container from the device. (Fig. 5)
• Remove the filter. (Fig. 6)
• Empty the dust container.
• Clean the container filter.
• Reattach the container to the device. To reassemble, follow the steps in reverse order.

Replacing Filters:

• To remove the filter:
• Press the handheld vacuum release button (H) on the main housing (E) of the brush vacuum. (Fig. 2)
• Remove the dust container from the device. (Fig. 5)
• Remove the filter. (Fig. 6)
• To install the filter, follow the steps in reverse order.

Cleaning the Rotating Brush:

• To remove the brush:
• At the bottom of the base, lift the flap to detach the brush. (Fig. 7)
• Remove and clean the brush.
• To reassemble, follow the steps in reverse order.

Consumables

Consumable parts for this model (such as filters) can be purchased from distributors and authorized sales points.

Always use original consumable materials specifically designed for your device model.

Removing Batteries from the Device

• Warning: Before removing the batteries, ensure they are completely discharged.
• Warning: The device must be disconnected from the power supply when removing batteries.
• To remove batteries after complete depletion of the device:
• Remove the front cover. (Fig. 8)
• Remove the 6 screws connecting the two parts of the handheld vacuum to access the internal components. (Fig. 8)
• Disconnect the connections and remove the 3 screws securing the battery to the motor. (Fig. 8)
• Carefully remove the battery from its housing.

Compliance Information

This device complies with the following directives:

• 2014/35/EU Low Voltage Directive
• 2014/30/EU Electromagnetic Compatibility Directive
• 2011/65/EU Restriction of Hazardous Substances in Electrical and Electronic Equipment Directive
• 2009/125/EC Ecodesign requirements for energy-related products.