Intelbras

Introduction

Congratulations, you have just purchased a product with Intelbras quality and safety.

The XSA 1000 / XSA 1000 BLACK universal support was structured to fit perfectly in most presence sensors available in the market and other equipment with compatible features. It also offers a wide direction angle, support for wiring passage, and UV protection for installing in outdoor environments.

Caution and Safety

• LGPD - Data processing by Intelbras: Intelbras does not access, transfer, capture, or perform any type of processing of personal data from this product.
• Follow all instructions in the manual for assembling and installing the product.
• Make sure that both the sensor and the bracket are securely fixed in place to avoid changes in the detection angle of the product.
• Make sure the installation location is stable and not subject to flickering.
• Intelbras recommends that the installation be carried out by a professional installer, as incorrect use of the articulator may impair the PET function and the coverage angle of the presence sensor.

Summary

1. Technical Specifications

General Features

2. Product Components

Diagram: Shows the individual components labeled 1 through 5: [Axle], [Fastening nut], [Ring], [Base], [Screw 3.5 x 9.5 mm]. Also shown is an assembled bracket labeled "Mounted bracket" with the Intelbras logo.

3. Characteristics

• Built-in material with UV protection.
• Easy Installation.
• Wide application scenario.
• Compatible with most compatible presence sensors on the market and other equipment that fits your applications.

4. Installation

Step 1: Fix the axis

Fix the axis (part 1) to the product, using the screws.

Diagram: Shows part 1 (Axle) being attached to a sensor body using screws (part 5).

Step 2: Insert shaft into fixing nut

Insert the shaft into the fixing nut (part 1 and part 2).

Diagram: Shows part 1 (Axle) and part 2 (Fastening nut) being combined. Visual representation: [Axle] + [Fastening nut] = [Assembly].

Step 3: Position the ring

Position the ring (piece 3) in the assembly above with the opening at the beginning of the shaft (piece 1). Rotate the ring to fit the shaft.

Diagram: Shows part 3 (Ring) being placed and rotated onto the assembly of part 1 and part 2. Visual representation: [Assembly] + [Ring] = [Further Assembly].

Step 4: Align markings

Position the product so that the markings are aligned.

Diagram: Shows the assembled bracket with alignment markings on the bracket and the sensor highlighted.

Step 5: Fix the base

Fix the base (part 4) in the location to be installed and tighten the fixing nut (part 2) clockwise.

Diagram: Depicts the base (part 4) being attached to a surface, with the fixing nut (part 2) being tightened clockwise.

Wall Installation

If the sensor is installed on a flat surface, use the four innermost holes on the base for fixing. If the sensor is used on a 90° corner, use the four outermost holes on the base.

Diagram: Two views illustrating wall mounting options. "Wall mounted" shows a flat surface installation using the four innermost holes on the base. "Mounted in the corner of the wall" shows a corner installation using the four outermost holes on the base. Both indicate "Passage for the screw".

The tabs for fixing to corners can be easily detached if they are not in use.

Diagram: Shows the base with corner tabs highlighted, and arrows indicating their detachment. Labeled "Removing the base".

Cable Routing

The XSA 1000 support has an opening for cable passage, if necessary. Follow the steps below for correct use.

1. Guide the cable through the designated passage.
2. Secure the cable using the two internal locks.
3. Route the cable through the hole located in the center of the base, towards the inside of the sensor that will be fixed.

Diagram: Illustrates cable routing through the base. A cable is shown guided through a designated passage and secured by two internal locks. Labels: "[Cable]", "[Lock]".

Note: It is important to use the cable fixing locks, as they prevent water from being drawn into the sensor.

Term of Warranty

It is expressed that this contractual warranty is granted according to the following conditions:

Customer name: _________________________
Customer's signature: _________________________
Tax Invoice No.: _________________________
Date of Purchase: _________________________
Model: _________________________
Retailer: _________________________
Serial No.: _________________________

1. All parts, pieces, and components of this product are warranted against any manufacturing defects, which may arise within a period of 1 (one) year - being 90 (ninety) days of legal warranty and 9 (nine) months subject to contractual warranty - from the date when the Customer purchased the product, according to the product purchase tax invoice, which is an integral part of this Term throughout the Brazilian territory. This contractual warranty expressly includes the product exchanges in case of manufacturing defect. If no manufacturing defect is confirmed, but there is a failure due to improper use, the Customer shall bear any of these incurred expenses.
2. The product must be installed according to the Product Manual and/or Installation Guide. If your product requires to be installed and configured by a skilled technician, you should seek for a reliable and skilled professional, but the costs of such services are not included in the product price.
3. Once the defect is confirmed, the Customer shall contact immediately the nearest Authorized Service listed in the report provided by the manufacturer; they are the only professionals authorized to check and remedy the defect within the warranty term provided herein. If it is not observed, the warranty is void, characterized as product infringement.
4. Eventually, if the Customer requests service at home, he/she may contact the nearest Authorized Service to ask for fee quotation of a technical visit. If it is necessary to withdraw the product to be repaired, the incurred expenses such as transportation and insurance costs, including taking and return after repaired, are under responsibility of the customer.
5. The warranty will be entirely voided if any of the following cases occur: a) if the defect is not due to manufacturing, but caused by the Customer or by third parties foreign to the manufacturer; b) if the product damages are caused by accident, disasters, agents of nature (lightning, flooding, landslide, etc.), humidity, network voltage, over-voltage caused by accident or excessive network voltage fluctuations), installation/use in disagreement with the user's manual or due to natural wear of parts, pieces and components; c) if the product had suffered any effects of chemical, electromagnetic, electric or animal (insects, etc.) nature; d) if the product serial number was altered or erased; and e) if the appliance is flawed.
6. This warranty does not cover data loss, therefore, in case of a product, it is advisable to the Customer to regularly make secure backup of the product data.
7. Intelbras is not liable for the installation of this product, as well as eventual attempts of fraud and/or sabotage in their products. Keep software and applications up to date, and if necessary, the required network protections against intrusions (hackers). The equipment is warranted against defects under normal conditions of use, and it is important to bear in mind that, because it is an electronic equipment, it is not protected from attempts of frauds or misleading actions that may interfere in its correct operation.
8. Properly dispose of your product after its useful life - deliver it to collection points for electrical and electronic products, at an authorized Intelbras technical assistance center or consult our website www.intelbras.com.br and support@intelbras.com.br or (48) 2106-0006 or 0800 7042767 for more information.

Also under these supplementary Term of Warranty, Intelbras S/A reserves the right to alter general, technical or aesthetics features without prior notice.

All images in this manual are for illustrative purposes only.

Contact Information

Produced by: Intelbras S/A – Indústria de Telecomunicação Eletrônica Brasileira

Rodovia BR 459, km 126, nº 1325 – Distrito Industrial – Santa Rita do Sapucaí/MG - 37538-400

CNPJ 82.901.000/0016-03 – www.intelbras.com/en

Version: 02.24

Made in Brazil