Feel Maestro at home

Welcome

Dear customer, we thank you for your purchase of goods.

Functionality, design, and conformity to quality standards guarantee reliability and convenience in use. Please read and comply with these original instructions prior to the initial operation of your appliance and store them for later use by subsequent owners. The thermo-pot is designed only for warming and boiling water for home use. Under condition of observance of user regulations and its special-purpose designation, parts of the appliance do not contain unhealthy substances.

Technical Specifications

• Model: MR082/084
• Capacity: 3.3/4.5 L
• Electrical Supply: Alternating current (AC)
• Rated Voltage: 220-240V
• Rated Frequency: 50Hz
• Power Consumption: 750W
• Protective Class: I
• Protection Class: IPX0

Description of the Appliance

The thermo-pot features the following components:

• 1. Water level scale: A visual indicator on the side showing the current water level.
• 2. Control Panel: Located on the lid, housing buttons and indicators for operation.
• 3. Dispensing spout: The nozzle from which water is poured.
• 4. Handle for lid opening: A lever used to lift the lid.
• 5. Lid: The main cover of the thermo-pot.
• 6. Mechanical dispensing button: A button on the lid for manual water dispensing.
• 7. Steam vent: A small opening on the lid to release steam during operation.
• 8. Carrying handle: Handles located on the sides for safe transportation.
• 9. Power cord: The cable that connects the appliance to the power source.
• 10. Plug for power cord: The end of the power cord that inserts into the electrical outlet.
• 11. Button for dispensing by a touch of a cup: A front-mounted button that dispenses water when a cup is pressed against it.
• 12. Rotary base: Allows the thermo-pot to swivel 360 degrees.
• 13. Indicator of "keep warm" function: Illuminates when the appliance is maintaining a warm temperature.
• 14. "Re-boiling" function button: A button to restart the boiling cycle.
• 15. Indicator "Boiling" function: Illuminates when the water is actively boiling.
• 16. "Water dispense" button: Activates the internal electric pump to dispense water.
• 17. Maximum water level mark: Indicates the highest safe level to fill the water tank.

Safety Instructions

⚠️ ATTENTION!

• Never immerse the thermo-pot, power cord, or plug in water or other liquids.
• Do not allow water or moisture to contact internal electrical parts.
• Always disconnect the thermo-pot from the mains before filling or cleaning.
• Do not touch the appliance with wet hands. Failure to comply may result in electric shock. ⚡️
• Never leave the appliance unattended while in use.
• Always switch off and disconnect from the mains after use, before cleaning, and before storage.
• Do not unplug by pulling the cord; grasp the plug.
• Ensure your home's electrical voltage matches the appliance's rating.
• The appliance must be connected to a grounded electrical outlet.
• Ensure your outlet can handle the appliance's power consumption.
• Using extension cords or multi-plugs may cause damage or fire.
• Do not use the appliance if the cord or plug is damaged, or if it malfunctions, has been dropped, or submerged in water. Contact a service center for repairs.
• This appliance is not intended for use by children or persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised.
• Do not allow children to play with the appliance or its packaging.
• Keep the power cord away from hot surfaces and sharp edges.
• Do not stretch, kink, or damage the power cord.
• Do not dispose of the appliance in general household waste.
• Do not use the appliance outdoors.
• Do not leave the thermo-pot filled with water in a room where the temperature may drop below freezing.
• ? CAUTION: The internal parts of the appliance become very hot during operation. Exercise caution to avoid burns when touching internal surfaces, the lid, water, or steam.
• Do not open the lid while the water is boiling.
• Do not move the thermo-pot while it is operating.
• Carry the thermo-pot only by its handles. Touch only the appliance body.
• Do not fill the thermo-pot with water above the "MAX" mark.
• Place the thermo-pot only on a dry, stable, level, and non-slip surface.
• Handle the thermo-pot with hot water with extreme care.
• Do not spill water during or immediately after boiling. Failure to follow these precautions may result in burns.
• To prevent damage from steam escaping from vents, do not place the thermo-pot directly against walls or furniture. Use a coaster to protect furniture surfaces.
• Do not place the thermo-pot on heating devices.
• ⚠️ CAUTION: Do not refill with cold water immediately after use. Allow the appliance to cool down first.
• Do not block the steam vent.
• Do not operate the thermo-pot without its lid.
• Do not switch on the appliance without water or if the water level is below the "MIN" mark or 0.5 liters. If the appliance is empty or has insufficient water, it will automatically shut off. If this occurs, disconnect from the mains, allow it to cool, refill with water, and then switch it on. The appliance will then resume normal operation.
• ⚠️ CAUTION: Operating the appliance without water, even with protection, may cause damage over time.
• Do not use the thermo-pot for purposes other than boiling water. Do not attempt to boil milk or prepare food in it.

Operation

First Use:

• Remove all packaging and promotional labels. Check for any damage.
• Wipe the interior and exterior of the appliance with a damp cloth, then dry thoroughly.
• Place the thermo-pot on a dry, level, and stable surface.
• Open the lid by lifting the handle (Diagram 3a). Some models may have a lid that detaches completely; to remove it, press the lock button while the lid is open (Diagram 3b). Reverse the process to reattach.
• Fill the thermo-pot with cold water up to the "FULL" (MAX) mark (Diagram 4).
• Close the lid securely.
• Unwind the power cord completely and plug it into the appliance's power inlet (Diagram 4).
• Plug the power cord into the mains socket. The "Boiling" indicator light will illuminate, and the thermo-pot will begin heating the water.
• Once the water starts boiling, the "Keep warm" indicator light will illuminate, and the thermo-pot will automatically switch to keep warm mode.
• To prepare the appliance for use, press the "Water dispense" button (Diagram 7c) and pour out half the water into a suitable container. Then, disconnect the thermo-pot from the mains and discard the remaining water (Diagram 6). The thermo-pot is now ready for use.

Boiling Water:

• Fill the thermo-pot with fresh water up to the "FULL" (MAX) mark.
• Place and connect the thermo-pot as described above.
• The thermo-pot will automatically switch on, and the red "Boiling" indicator will illuminate.
• When the water begins to boil, the green "Keep warm" indicator will illuminate, and the thermo-pot will automatically switch to keep warm mode. The "Boiling" indicator will turn off.
• Boiling water is now complete.
• ⚠️ IMPORTANT: Keep the lid closed during the boiling process.

Dispensing Water:

After the boiling indicator turns off and the keep warm indicator lights up, water can be dispensed using one of three methods:

• Method 1 (Diagram 7a): Place a cup under the dispensing spout and press the dispensing button located on the spout.
• Method 2 (Diagram 7b): Press and hold the "Water dispense" button on the control panel. The built-in electric pump will dispense water as long as the button is pressed.
• Method 3 (Diagram 7c): Press the mechanical pump button located on the lid.

Re-boiling:

The automatic keep warm temperature is below boiling point. To quickly bring the water back to a boil, press the "Re-boiling" function button.

Cleaning and Maintenance

General Cleaning:

• ⚠️ Never clean the thermo-pot while it is connected to the mains.
• Before cleaning, disconnect the thermo-pot and allow it to cool down.
• Do not use abrasive or aggressive detergents.
• Never submerge the thermo-pot, power line cord, or plug in water or other liquids.
• Wipe the inner tank with a sponge and rinse with water.
• Wipe the outer body and lid with a damp cloth, then wipe dry.

Descaling:

Regular descaling improves the device's performance. The rate of scale formation depends on water hardness and usage. Solid plaque deposits on the tank surface are not allowed.

It is recommended to clean the thermo-pot at least once every 2-3 months, or whenever solid plaque and scale appear.

To remove scale:

1. Add citric acid (20g per 1 liter of water) to the thermo-pot.
2. Fill the thermo-pot with cold water to the maximum level. Mix the solution thoroughly.
3. Connect the thermo-pot to the power supply and let it boil. Once boiling, and the thermo-pot enters the heating mode, carefully open the lid and check if all scale has been removed from the tank wall. If scale remains, repeat the boiling process and allow the solution to stand for several hours.
4. Pour out the solution from the device and carefully rinse the tank with water.
5. To remove any residual acid smell, fill with fresh water, connect to the power supply, and let it boil.
6. Turn off the thermo-pot, disconnect from the mains, carefully drain the tank, and rinse with clean water.

Any other maintenance should be performed by qualified personnel in a service center.

Storage

• Before storage, disconnect the thermo-pot and let it cool down.
• Wipe and dry the thermo-pot before storing.
• Store the thermo-pot in a cool, dry, and clean place, out of reach of children and individuals with limited physical or mental abilities.

Environmental Protection

Old appliances contain valuable materials that can be recycled. Please arrange for the proper recycling of old appliances by using appropriate collection systems.

Subject to technical modifications.