Gymax Set of 2 Counter Height Chairs User Manual
This instruction booklet contains important safety information. Please read and keep for future reference.
Contact Us
Do NOT return this item. Contact Gymax customer service for assistance. Email: cs@gymaxservice.com
Before You Start
- Read each step carefully before starting to ensure correct assembly order.
- Check that all parts are included, as most board parts are labeled or stamped on the raw edges.
- Work in a spacious area, preferably on a carpet, to avoid scratching parts.
- Keep hand tools close at hand. Do not use power tools for assembly, as they may scratch or damage the parts.
Part List
- A: CHAIR BACK x 2
- B: SEAT CUSHION x 2
- C: LEG LEFT x 2
- D: LEG RIGHT x 2
- E: FRONT STRETCHER x 2
- F: LEFT SIDE STRETCHER x 2
- G: RIGHT SIDE STRETCHER x 2
Hardware List
- 1: BOLT Ø5/16"x3" (x4 per set)
- 2: BOLT Ø5/16"x2-1/4" (x4 per set)
- 3: BOLT Ø5/16"x1-1/2" (x2 per set)
- 4: SPRING WASHER Ø5/16" (x10 per set)
- 5: FLAT WASHER Ø5/16" (x10 per set)
- 6: ALLEN KEY (x1)
- 7: SCREW (x6 per set)
Note: Some hardware may not be included.
Assembly Instructions
Important Note: Place all parts on a clean and smooth surface such as a rug or carpet to avoid scratching. Follow assembly instructions step by step. Do not tighten all screws and bolts until the chair is fully set-up.
- Attach Seat Cushion (B) to Chair Back (A) using Bolts (1, 2, 3), Spring Washers (4), and Flat Washers (5). Use Allen Key (6) to tighten. Repeat for the second chair.
- Attach Legs (C, D) to the Seat Cushion assembly. Secure using Bolts (1, 2, 3), Spring Washers (4), and Flat Washers (5). Use Allen Key (6) to tighten. Repeat for the second chair.
- Attach Front Stretcher (E) between the front legs. Secure with Bolts (1, 2, 3), Spring Washers (4), and Flat Washers (5). Use Allen Key (6) to tighten. Repeat for the second chair.
- Attach Left Side Stretcher (F) and Right Side Stretcher (G) between the side legs. Secure with Bolts (1, 2, 3), Spring Washers (4), and Flat Washers (5). Use Allen Key (6) to tighten. Repeat for the second chair.
- Ensure all parts are aligned correctly. Tighten all bolts and screws securely.
- The assembly is complete.
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting. Furniture polish is not necessary, but if used, test first in an inconspicuous area. Avoid using solvents, as they may damage the finish. Remove liquid spills immediately by blotting gently with a soft, clean cloth; avoid rubbing.
Check bolts/screws periodically and tighten them if necessary.
Further advice about wood furniture care
Protect outdoor furniture with a cover when not in use, as long-term sunlight exposure can damage the surface. Wood and metal frames can also be affected by extremes in temperature and humidity. Proper care and cleaning at home will extend the life of your purchase.
