Gymax 5-Piece Bar Table Set User Manual

Contact Us!

Do NOT return this item. Contact our friendly customer service department for help first.

E-mail: cs@gymaxservice.com

Before You Start

• Read each step carefully before starting. It is very important to ensure each step is followed in the correct order, otherwise assembly difficulties may occur.
• Most of the board parts are labeled or stamped on the raw edges. Have a check to make sure all parts are included.
• Work in a spacious area, preferably on a carpet close to where the unit will be used.
• Keep the hand tools close at hand. Do not use power tools to assemble your furniture. They may scratch or damage the parts.

Component List

1. Bar table top x1 pc

2. Bar table top support x2 pcs

3. Table leg x2 pcs

4. Table stretcher x2 pcs

5. Chair seat x4 pcs

6. Front-Chair apron x4 pcs

7. Back chair component x4 pcs

8. Left Chair leg x4 pcs

9. Right Chair leg x4 pcs

10. Cross bar x4 pcs

11. Parasol cap x1 pc

Hardware:

• A. M4x15mm Screw x10 pcs
• B. M4x40mm Screw x38 pcs
• C. M6x20mm Bolt x48 pcs
• D. M6x15mm Bolt x12 pcs
• E. Allen Key x2 pcs

Assembly Instructions

Step 1: x4

Attach part 6 to parts 8 and 9 using screws A. Ensure 50% tightness initially, then fully tighten to 100%.

Step 2: x4

Attach part 7 to the structure from Step 1 using screws A. Ensure 50% tightness initially, then fully tighten to 100%.

Step 3: x4

Attach cross bars (10) to the chair legs using screws B.

Step 4: x4

Complete the bar stool assembly.

Step 5:

Attach table legs (3) to the bar table top supports (2) using bolts D.

Step 6:

Attach the assembled chair leg structures to the table top supports using screws A.

Step 7:

Attach the table stretcher (4) to the table legs using screws B.

Step 8:

Attach the bar table top (1) to the assembled base using screws A.

Step 9:

Place the parasol cap (11) onto the table.

Step 10:

Position the assembled chairs around the table.

Step 11:

Final assembly view of the 5-piece bar table set.

Care and Maintenance

• Use a soft, clean cloth that will not scratch the surface when dusting.
• Use of furniture polish is not necessary.
• Should you choose to use polish, test first in an inconspicuous area.
• Using solvents of any kind on your furniture may damage the finish.
• Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing.
• Check bolts/screws periodically and tighten them if necessary.

Further advice about wood furniture care

Please protect your outdoor furniture with a cover when not in use since long-term sunlight exposure will result in damage to the surface.

In addition to sunlight damage, wood and metal frames suffer when exposed to extremes in temperature and humidity.

Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful tips will enhance your furniture as it ages.

Welcome to visit our website and purchase our quality products!

With your inspiring rating, COSTWAY will be more consistent to offer you EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!

US office: Fontana, California

UK office: Ipswich

• Reward Points
• Exclusive Customer Service
• Personalized Recommendations
• Permanent Shopping Cart
• Order History

5 Star Rating

We would like to extend our heartfelt thanks to all of our customers for taking time to assemble this product and giving us valuable feedbacks.

THANK YOU