DJI Flip Parallel Charging Hub
User Guide v1.2
This document provides instructions for the DJI Flip Parallel Charging Hub. For the latest information, visit dji.com/flip/downloads.
DJI and DJI FLIP are trademarks of DJI. Copyright © 2025 DJI. All Rights Reserved.
Warnings
- Place the DJI Flip™ Parallel Charging Hub on a flat, stable surface with good ventilation when charging an external device or accumulating power. Ensure proper insulation to prevent fire hazards.
- DO NOT touch the metal terminals on the battery ports. Clean them with a clean, dry cloth if there is any buildup.
- Charge batteries with low power promptly. It is recommended to store batteries in the charging hub. The hub automatically checks battery power every seven days and will charge a low-power battery (0%) from a high-power battery until it reaches 5% to prevent over-discharging.
Usage
Charging Intelligent Flight Batteries
1. Insert Intelligent Flight Batteries into the charging hub. Align the battery's protrusion with the hub's groove and press until it clicks. (See Figure A1: Diagram showing the correct insertion of an Intelligent Flight Battery into the charging hub, aligning the battery's protrusion with the hub's groove and pressing until a click is heard.)
2. Connect the charging hub to a power outlet using a USB-C charger. Status LEDs indicate battery status during charging. Refer to the Status LEDs Descriptions for blinking patterns. Charging sequence varies with different charger power ratings:
| Charger Power | Charging Sequence |
|---|---|
| <65 W | Charges in sequence from highest to lowest battery level. |
| ≥65 W | Charges two batteries simultaneously: First charges the battery with the second highest battery level until it matches the highest charge level, then fully charges both batteries together. |
3. Batteries can be stored in the charging hub after charging. Remove a battery for use. (See Figure A2: Diagram showing batteries stored in the charging hub.)
Using the Charging Hub as a Power Bank
1. Insert Intelligent Flight Batteries into the charging hub. Connect an external device (e.g., smartphone, remote controller) to the USB-C port and press and hold the function button for three seconds. (See Figure B: Diagram illustrating the connection of an external device to the charging hub's USB-C port, and pressing the function button.)
2. Batteries discharge from lowest to highest power level, supplying power to the external device. To stop charging, disconnect the external device.
- If a battery's remaining power is below 7%, it cannot charge an external device.
- Reconnect the USB-C cable to switch back to charging Intelligent Flight Batteries.
Power Accumulation
1. Insert Intelligent Flight Batteries into the charging hub. Press and hold the function button for 3 seconds to transfer power from lower-level batteries to the highest-level battery. Status LEDs for lower-level batteries show current power; higher-level battery LEDs blink sequentially. (See Figure C: Diagram depicting the power accumulation process where power is transferred from lower-level batteries to the highest-level battery, indicated by status LEDs.)
2. To stop power accumulation, press and hold the function button for 3 seconds again. After stopping, press the function button to check battery levels.
- Power accumulation stops automatically if:
- The receiving battery is fully charged, or the output battery's power is below 10%.
- A charger or external device is connected, or a battery is inserted/removed during accumulation.
- Power accumulation is interrupted for over 15 minutes due to abnormal battery temperature.
After accumulating power, charge the lowest-level battery as soon as possible to avoid over-discharge.
Checking Battery Level
After inserting batteries, press the function button once. Status LEDs will display battery levels. Refer to the descriptions below.
Status LEDs Descriptions
Each battery port has a corresponding status LED array indicating charging status, battery level, and abnormal status. Descriptions for battery level and abnormal status match those on DJI aircraft. Refer to the aircraft's user manual for details.
Charging Status
| Status LEDs | Meaning |
|---|---|
| Blink quickly successively | Battery is charging using a USB PD charger. |
| Blink slowly successively | Battery is charging using a normal charger. |
| Solid | Battery is fully charged. |
| All status LEDs blink in sequence | No battery is inserted. |
Specifications
| Product Model | CHX141-65 |
|---|---|
| Recommended Charger | DJI 65W Portable Charger or other USB Power Delivery chargers |
| Compatible Battery | BWX141-3110-7.16 |
| Operating Temperature | 5° to 40° C (41° to 104° F) |
| Input (USB-C) | 5 V/9 V/12 V/15 V Max. 4.3 A |
| Output (USB-C) | 15 V/12V-2A; 9 V/5V 3A |
| Charging Time (using DJI 65W Portable Charger) | Fully charges one battery: Approx. 45 mins Fully charges two batteries: Approx. 70 mins |
Compliance Information
FCC Compliance Statement
Supplier's Declaration of Conformity
Product name: DJI Flip Parallel Charging Hub
Model Number: CHX141-65
Responsible Party: DJI Research LLC
Responsible Party Address: 17301 Edwards Road, Cerritos, CA 90703
Website: www.dji.com
DJI Research LLC declares that the above mentioned model was tested to comply with all applicable FCC rules and regulations. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
ISED Compliance
CAN ICES-003 (B) / NMB-003(B)
EU & UK Compliance Notice
EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device (DJI Flip Parallel Charging Hub) is in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU. A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-compliance. EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany.
GB Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device (DJI Flip Parallel Charging Hub) is in compliance with the essential requirements and other relevant provisions of Electromagnetic Compatibility Regulations 2016. A copy of the GB Declaration of Conformity is available online at www.dji.com/euro-compliance.
Environmental Disposal
Old electrical appliances must not be disposed of together with residual waste but must be disposed of separately. Disposal at communal collecting points by private individuals is free. The owner of old appliances is responsible for bringing them to these or similar collection points. This small personal effort contributes to recycling valuable raw materials and the treatment of toxic substances.
