DJI Mavic 4 Pro Quick Start Guide

Introduction

This guide provides essential information for getting started with your DJI Mavic 4 Pro drone. It covers initial setup, battery activation, and basic operation.

For detailed information and advanced features, please refer to the full user manual available online.

You can access tutorials and the user manual by scanning the QR code provided.

[Diagram Description: A QR code linking to tutorial videos and the user manual.]

Official Resources: https://www.dji.com/mavic-4-pro/downloads

Initial Setup and Battery Activation

Before your first use, it is recommended to activate the battery.

Step 1: Battery Activation

Press the power button on the battery once to activate it before first use.

[Diagram Description: Shows a drone battery with an arrow pointing to the power button, indicating a single press.]

Step 2: Powering On/Off the Drone

To manually power the drone on or off, press the power button once, then press and hold it.

[Diagram Description: Illustrates the sequence for powering the drone on/off: first a short press, then a long press and hold.]

Using the DJI Fly App

The DJI Fly app is essential for operating your drone. Download and install it on your smartphone or tablet.

[Diagram Description: Shows icons for the DJI Fly App on a smartphone screen.]

DJI Mavic 4 Pro Drone Components

The following lists the main components of the DJI Mavic 4 Pro drone:

• 1. Gimbal and Camera: Houses the camera and stabilization system.
• 2. Auxiliary Light: Provides illumination for the camera.
• 3. Battery Buckles: Secures the intelligent flight battery.
• 4. Front LEDs: Indicate the drone's status and direction.
• 5. Aircraft Status Indicators: Provide visual feedback on the drone's operational status.
• 6. Intelligent Flight Battery: The power source for the drone.
• 7. Power Button: Used to turn the drone on and off.
• 8. Battery Level LEDs: Indicate the remaining battery charge.
• 9. USB-C Port: For charging and data transfer.
• 10. microSD Card Slot: For storing photos and videos.

[Diagram Description: An illustration of the DJI Mavic 4 Pro drone with numbered callouts corresponding to the component list above.]

DJI RC Pro 2 Controller Components

The DJI RC Pro 2 controller is used to operate the drone. Key components include:

• 1. Dial: For adjusting various settings.
• 2. Back Button: Returns to the previous screen or function.
• 3. Flight Mode Switch: Selects different flight modes (e.g., Normal, Sport).
• 4. 5D Button: A multi-directional control button for navigation and function selection.
• 5. Flight Pause/Return to Home (RTH) Button: Initiates an emergency stop or returns the drone to its takeoff point.
• 6. microSD Card Slot: For storing controller settings or recordings.
• 7. USB-C Port: For charging and data transfer.
• 8. HDMI Port: For video output.
• 9. Gimbal Dial: Controls the tilt of the camera gimbal.
• 10. Record Button: Starts and stops video recording.
• 11. Power Button: Turns the controller on and off.
• 12. Camera Settings Dial: Adjusts camera parameters like aperture or shutter speed.
• 13. Focus/Shutter Button: Controls camera focus and takes photos.

[Diagram Description: An illustration of the DJI RC Pro 2 controller with numbered callouts corresponding to the component list above.]

Parallel Charging Hub

The Parallel Charging Hub allows for efficient charging of multiple batteries. It supports up to 240W charging.

[Diagram Description: Shows the Parallel Charging Hub connected to a power source and a drone battery, indicating charging.]

Software Updates

To ensure optimal performance, it is recommended to download the DJI Assistant 2 and DJI Fly applications and update your drone's firmware when new versions are available.