IDEAL 61-535 Automatic Circuit Breaker Identifier

Introduction

The IDEAL 61-535 is a versatile 120V AC Circuit Breaker Finder designed to efficiently identify the specific circuit breaker or fuse protecting a live branch circuit. This system comprises a transmitter and a receiver, simplifying electrical diagnostics and safety checks.

The transmitter sends a signal through energized conductors, indicating correct or incorrect wiring conditions with illuminated LEDs and a GFCI trip test function. The receiver detects this signal, pinpointing the correct breaker through audible beeps and a flashing green LED. Additionally, the receiver features a non-contact voltage (NCV) sensor to detect AC voltage (80-300V AC), indicated by a red flashing LED and beeping sound. Both modes can be muted for use in noisy environments, and a built-in work light aids visibility in low-light conditions.

For detailed operating instructions, safety precautions, and troubleshooting, please refer to the full manual. For assistance or inquiries, contact IDEAL INDUSTRIES, INC. customer service or visit their website at www.idealind.com.

Safety Information

WARNING: Arc Flash and Shock Hazard. Proper Personal Protective Equipment (PPE) is required. Always follow safety procedures and refer to NFPA 70E standards. Failure to comply can result in serious injury or death.

CAUTION: To prevent tester damage, equipment damage, or data loss, use the correct terminals, function, and range for each measurement. Clean the tester with a damp cloth and mild detergents only; avoid abrasives or solvents.

Always test with a contact voltage tester to confirm no voltage is present before working with bare conductors.

Key Features

• Automatic Circuit Breaker Identification
• Non-Contact Voltage (NCV) Sensing
• GFCI Trip Test
• Audible and Visual Indicators
• Built-in Work Light
• Low Battery Detection

Resources

• For product registration, manuals, and videos, visit www.idealind.com.
• Products are available online at Valuetesters.com.