Roborock S7 MaxV Ultra: Component Identification and Assembly
Main Unit Components (Diagram Group A)
The following components are identified in Diagram Group A:
- A1: Main unit, front view, showing various labeled parts (A1-1 to A1-8).
- A2: Main unit, top view, with detailed labels (A2-1 to A2-8).
- A3: Main unit, rear view, with detailed labels (A3-1 to A3-10).
- A4: Main unit, side view, showing internal components and labels (A4-1 to A4-5).
- A5: Main unit, showing a specific component with labels (A5-1 to A5-4).
- A6: Main unit, showing a component with labels (A6-1 to A6-3).
- A7: Accessory component, possibly a brush or filter, with labels (A7-1).
- A8: Accessory component, possibly a filter or cover.
- A9: Accessory component, possibly a filter or cover.
- A10: Accessory component, possibly a filter or cover.
- A11: Docking station, front view, with detailed labels (A11-1 to A11-15).
- A12: Docking station, side view, with labels (A12-1 to A12-3).
Docking Station and Accessories (Diagram Group B)
Diagram Group B illustrates the docking station and associated accessories:
- B1: Docking station, showing assembly steps and labeled parts (B1-1 to B1-7).
- B2: Accessory component, possibly a water tank or dustbin.
- B3: Accessory component, possibly a water tank or dustbin, with labels (B3-1 to B3-3).
Assembly and Usage Steps (Diagram Group C)
Diagram Group C provides visual instructions for assembly and usage:
- C1: Shows the main unit with components being attached or removed, including labels (C1-1 to C1-9).
- C2: Illustrates a step involving a component with labels (C2-1 to C2-3).
- C3: Depicts a component with labels (C3-1, C3-2).
- C4: Shows a component being inserted into the main unit.
- C5: Illustrates the docking station with components and labels (C5-1 to C5-4).
- C6: Shows a component being attached to the docking station, with labels (C6-1 to C6-3).
- C7: Depicts a component with labels (C7-1 to C7-3).
- C8: Shows a component with labels (C8-1).
- C9: Illustrates the docking station with components and labels (C9-1 to C9-5).
- C10: Shows the assembled docking station.
- C11: Illustrates a correct and incorrect method for attaching a component.
- C12: Shows a component being attached to the main unit.
- C13: Depicts a component being attached to the main unit.
- C14: Shows a component being attached to the main unit.
- C15: Illustrates the main unit with components being attached or removed, with labels (C15-1 to C15-3).
- C16: Shows various accessory components, possibly filters or brushes, with labels (C16-1 to C16-6).
