Product Overview
Please read this user manual carefully before use and keep it for future reference.
The product overview shows the charging case with indicators for power (⏻), light (?), and charging (⚡). One earbud is shown with icons representing wireless signal (☍) and microphone (?).
Package Contents
The package includes: a charging case, two wireless earbuds (left and right), a USB-C charging cable, and documentation.
First Use
To begin using the earbuds for the first time: 1. Remove the protective film from the earbuds. 2. Place the earbuds into the charging case. 3. Close the charging case. To use the earbuds, open the case again.
Removing and Inserting Earbuds
Insert the earbuds into the charging case slots. They will automatically attach via magnets. A checkmark (✔️) indicates correct placement.
Wearing
Identify the Left (L) and Right (R) earbuds. Gently twist the end of the earbud downwards along the outside of your ear to ensure a secure and comfortable fit.
Charging
Place the earbuds into the charging case. The case and earbuds will indicate charging status (⚡?). Connect a USB-C cable to the charging case to charge it.
Power On / Power Off
Power On: Open the charging case (⏻). The earbuds will power on.
Power Off: Place both earbuds into the charging case and close the lid (?). The earbuds will power off.
Connection
During pairing, the white indicator lights on the earbuds blink slowly. After successful pairing, the lights stay on for 5 seconds and then turn off. If the device is not paired within 1 minute, the indicator lights will turn off.
The diagram shows earbuds in the case and a smartphone screen displaying Bluetooth settings with "Xiaomi OpenWear Stereo" as available equipment.
Connecting to Two Devices
To connect to two devices simultaneously: 1. Leave both wireless earbuds in the charging case. 2. Press and hold the earbuds for 2 seconds until the white light blinks slowly, indicating pairing mode. 3. You can then connect to the second device.
Note: Dual-device connection is disabled by default. To enable this feature, please activate it within the Xiaomi Earbuds app.
Disconnection and Automatic Reconnection
Connection Loss: Occurs when earbuds are more than 10 meters (33 feet) away from the device (® > 10m).
Connection Interruption: May occur due to many wireless devices nearby or strong environmental interference.
Manual Disconnection: Place both earbuds back into the charging case and close the lid, or manually turn off Bluetooth on your device.
The diagram illustrates disconnection scenarios and automatic reconnection, showing earbuds in the case and a smartphone's Bluetooth settings.
Factory Reset and Function Overview
To reset the earbuds to factory settings: Press and hold the earbuds in the charging case for 10 seconds until the orange indicator blinks three times. Note: Gesture settings can be customized in the Xiaomi Earbuds app.
Function Overview:
- Music: Double-tap (x2) to Play/Pause (▶️/⏸️).
- Calls: Double-tap (x2) to Answer/End call (?). Triple-tap (x3) to Reject call (?).
Connecting to the App
1. Scan the QR code to download and install the Xiaomi Earbuds app for additional features.
2. Follow the in-app instructions to connect the earbuds.
Note: During the connection process, ensure Bluetooth is active on your smartphone. Place the earbuds back into the charging case, open the lid, and ensure your smartphone is close to the case.
*Xiaomi Earbuds app supports mobile phones with Android 6.0 and higher, and iOS 14.0 and higher.
*Please update the app to the latest version.
Specifications
| Product: | Wireless Earphones |
| Model: | M2319E1 |
| Charging Port: | Type-C |
| Earbud Input: | 5 V = 130mA |
| Case Input: | 5 V = 1A |
| Case Output: | 5 V = 260mA |
| Wireless Connectivity: | Bluetooth® 5.3 |
| Operating Temperature: | 0°C to 45°C |
| Wireless Signal Range: | 10 m (open space without obstructions) |
| Operating Frequency: | 2402 MHz to 2480 MHz |
| Max Transmit Power: | <13 dBm (for EU) |
| Compatibility: | This product only supports certain Android or iOS systems. For detailed information, visit the product page at www.mi.com. |
Notes and Compliance
Note: Due to Bluetooth signal characteristics, occasional connection interruptions or sound loss may occur in densely populated areas with 2.4 GHz electromagnetic signal interference. The power supplied by the charger should be between a minimum of 4.4 watts and a maximum of 5 watts to achieve maximum charging speed.
Information on Disposal and Recycling of WEEE (Waste Electrical and Electronic Equipment)
All products marked with this symbol (♻️) are waste electrical and electronic equipment and should not be mixed with unsorted household waste. Protect human health and the environment by handing over your equipment to a designated collection point for recycling. Proper disposal and recycling help prevent negative impacts on the environment and human health. For more information, contact your installer or local authorities.
CE Mark
EU Declaration of Conformity: Xiaomi Communications Co., Ltd. hereby declares that the radio equipment type M2319E1 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: http://www.mi.com/global/service/support/declaration.html
Precautions
Please read the following precautions carefully to ensure optimal device performance and prevent dangerous use or unauthorized operations.
- Product information and certification marks are on the charging case.
- To prevent possible hearing damage, do not use this product at high volume for extended periods.
- Do not use wireless earbuds while driving and comply with applicable regulations.
- Use only certified charging adapters that meet local safety standards.
- Do not disassemble, strike, crush, or incinerate the product, as it may explode.
- This product contains a non-replaceable built-in battery. Do not attempt to remove or modify it. Batteries must be replaced by authorized service centers with the same type. Using a different battery type may disable protective measures. Do not dispose of batteries in landfills; comply with local regulations.
- Avoid exposing the battery to fire, heated ovens, or mechanical damage, which could lead to explosion.
- Do not use this product during thunderstorms, as they can cause malfunctions and increase the risk of electric shock.
- Leaving the battery in extremely high temperatures may lead to explosion or leakage.
- The battery exposed to extremely low air pressure may lead to explosion or leakage.
- These earbuds and accessories may contain small parts; keep them out of reach of children.
- Stop using the product and seek medical attention if skin irritation (redness or swelling) occurs.
- Enabling noise cancellation may affect your perception of surrounding sounds and warnings. Ensure you are in a safe environment before using this function.
- The symbol (=) indicates DC voltage.
Bluetooth® and its logos are registered trademarks of Bluetooth SIG, Inc. Any use by Xiaomi Inc. is under license. Other trademarks belong to their respective owners.
Warranty Information
Xiaomi offers specific consumer warranties in addition to statutory warranties. These are subject to local laws and may be limited to the country/region of purchase. Xiaomi will, at its discretion, repair, replace, or refund the product. The warranty does not cover normal wear and tear, force majeure, misuse, or damage due to negligence. Contact Xiaomi's authorized service network, distributors, or the retailer for service. Current warranties do not apply to Hong Kong and Taiwan. Products not duly imported, manufactured, or procured from Xiaomi or its official retailers are not covered. You may obtain warranties from the unofficial retailer.
For more information on consumer warranty benefits, visit: https://www.mi.com/global/support/warranty
Disclaimer
Product illustrations, accessories, and user interfaces are schematic and may differ slightly from the actual product. This manual is published by Xiaomi or an entity within the Xiaomi ecosystem. Typographical errors and inaccuracies may occur and are subject to change without notice.
Manufacturer: Xiaomi Communications Co., Ltd.
Address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085.
For more information, visit www.mi.com.
User Manual Version: V1.0
Regulatory Compliance
Radio Frequency Interference: If this device causes harmful interference to radio or television reception, try correcting it by: reorienting/relocating the antenna; increasing the separation between the device and receiver; connecting the device to an outlet on a different circuit than the receiver; or consulting a dealer or experienced radio/television technician.
ISED Declaration of Conformity: This device contains license-exempt transmitter(s)/receiver(s) that comply with Industry Canada's license-exempt RSS standard(s). Operation is subject to two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation. This device complies with IC RSS-102 radiation exposure limits for an uncontrolled environment.
Radio Wave Exposure Compliance: This device complies with FCC/ISED limits for radiation exposure in an uncontrolled environment. This transmitter must not be co-located or operated with any other antenna or transmitter. Install and operate with a minimum distance of 0 mm between the radiator and your head. The portable device meets FCC/ISED radio wave exposure requirements, with a SAR limit of 1.6 W/kg averaged over one gram of tissue.
FCC ID: 2AFZZM2319E1
IC: 25903-M2319E1
CAN ICES-003(B)/NMB-003(B)
Importer: AT Computers a.s., Těšínská 1970/56, Slezská Ostrava, 710 00 Ostrava, IČO: 61672599.
