The TE AMP-O-LECTRIC Model G II+ Terminator is designed for the ultimate in flexibility, reliability, and safety in wire processing applications.
Specifications
Customer Manual: 409-32035
Capacity: 4537 kg [10,000 lb] maximum crimp force
Air: Pneumatic 620-760 kPa [90-100 psi] for models with air-feed applicators
Electrical: 208-240 VAC, 50/60 Hz, Single Phase Current. Operating current is 5 amps.
Key Features
Engineered for Higher Voltage Applications
The Model G II+ combines all the features of the popular GII line with the power to handle larger diameter wire sizes used for some high-voltage cable assemblies.
Complete Control
The user-friendly Crimp Quality II (CQM II) control panel includes simple button controls for motor powering on/off, adjusting ram speed, jogging the motor forward or in reverse, switching to split-cycle operation, work lighting, air feed, and batch counter reset. For improved quality, the controls also detect and report errors in the machine and stop cycling when a bad crimp is detected by the CQM II.
Precision Matters
All Model G II+ Terminators include precision adjustment for crimp height. This is an important feature, which, in combination with the optional CQM II, enables repeatable, tight crimp tolerances required for today's demands for higher levels of quality. By simply resetting a dial, the operator can adjust crimp height in 0.013mm [.0005"] increments over a 0.457mm [.018"] range.
Engineered with the Operator in Mind
The Model G II+ utilizes strong LED lighting in the under cabinet and target areas to improve operator visibility. The standard variable-speed option gives the operator more flexibility for applications that benefit from slower ram and feed speeds. With its tool-less changeover capability, setup is both quick and easy.
Maximize Efficiency. Increase Repeatable Performance.
Consider adding a Crimp Quality Monitor (CQM II) and strip module to your Model G II terminator. This all-in-one approach allows you to strip and crimp terminals on the same machine, providing real-time crimp quality monitoring to ensure 100% efficiency.
For additional information on the Stripping Module, download catalog #65004 from tooling.te.com.
For additional information on the CQM II, download catalog #82275 from tooling.te.com.
Ordering Information
| Model | Part Number | Applicator Type | Guard Insert | Existing Applicator Upgrade Kit | Standard Equipment |
|---|---|---|---|---|---|
| Base Model Base Model w/ CQM | 2844800-1 | Mid-Size Side Feed Mid-Size End Feed |
2844807-1 (Shipped with Machine) | Not Required | Air Feed Kit 2217339-1 |
| 2844800-2 | Mid-Size Side/End Feed with Wire Seals Inverted AMPLIVAR Splice OCEAN Side Feed OCEAN End Feed |
2844808-1 2844818-1 2844817-1 |
Not Required | ||
| Loose Piece Loose Piece w/CQM | 2844810-1 | Loose Piece Mid-Size Applicators | 2844813-1 (Shipped with Machine) | 2844832-1 | - |
| 2844810-2 | Mini-Size Loose Piece Splice | 2844814-1 | 2844827-1 | ||
| Loose Piece Loose Piece w/CQM | 2844820-1 | Through Splice Mid-Size Side Feed |
- | 2844831-1 | Air Feed Kit 2217339-1 |
| 2844820-2 | Through Splice Mid-Size End Feed |
- | 2844825-1 |
Dimensions
Dimensions (without terminal reel and reel support):
- Height: 520.7mm [20.5"]
- Depth: 635.2mm [25"]
- Width: 624.3mm [24.5"]
- Weight: Approx. 116 kg [255 lb]
Contact Us
North America (US, Mexico and Canada)
- Wire processing equipment: 800-722-1111 or 717-810-3434
- Board processing equipment: 888-782-3349 or 610-893-9680
- E-mail: fieldservicesnorthamerica@te.com
- Web: www.te.com/fieldservice
For locations outside North America, visit www.tooling.te.com.
