YITAHOME YZZW-V3 Party Tent

ASSEMBLY INSTRUCTIONS

Model Numbers: FTPLCG-2047, FTPLCG-2048, FTPLCG-2049, FTPLCG-2050

Contact Us

If you have any questions about the installation of YITAHOME products, please contact us at:

+1 (888) 717-8084 (Mon-Fri 8:00 AM-4:30 PM PST / Sat. 8:00 AM-12:00 PM PST)

Email: after-sale.cs@hotmail.com

Alternative contact for Amazon.com orders:

Log into your Amazon account.
Go to "Your Orders" and find the purchase.
Click on "Contact Seller".

Product Overview

This document provides assembly instructions for the 20x30 FT PARTY TENT.

⚠️ WARNING

Important Safety Information:

Must use ground nails, ropes, and expansion screws for stability, regardless of ground type, to prevent devastating injuries to people inside or nearby and property damage caused by a collapsing gazebo.
Do not use this gazebo in high winds, heavy snow, or inclement weather. It is not designed to withstand strong gusts of wind, heavy snow accumulation, or other inclement weather. Take precautions when wind speed exceeds 25 MPH, and clear snow when it accumulates more than 2 inches.
Before use, thoroughly inspect the gazebo to ensure all bolts, nuts, and buckles are completely tightened and securely fastened.
Warranty does not cover damages, losses, or injuries resulting from improper installation, misuse, failure to use stability accessories, lack of snow cleaning, or failure to take precautionary measures.

General Assembly Instructions

Three or more people are required for assembly.
A ladder is recommended during assembly.
Ensure you have all the required parts and organize them before assembling.
An electric drill is recommended for assembly.
Do not use candles, matches, or open flames of any kind inside or near a tent.
Professional installation is highly recommended.

Parts List

Item No.	Reference Image Description	Quantity	Item No.	Reference Image Description	Quantity
1	Pole connector (various types)	X20	G	Pole connector	X4
2	Pole connector	X10	a	Tent peg	X140
3	Pole connector	X10	b	Tent peg	X20
4	Pole connector	X6	c	Tent peg	X8
5	Pole connector	X4	d	Tent peg	X8
6	Pole connector	X2	e	Tent peg	X1
7	Pole connector	X4	f	Tent peg	X2
A	Pole	X6	g	Tent peg	X2
B	Pole	X9	h	Bag	X3
F	Pole	X6	m	Tent peg	X28

Step 1

Connect poles marked 'A' (6 pieces) and 'B' (9 pieces) using item 1 (12 pieces).

Diagram shows connecting poles A and B into a central connector piece labeled '1'. The arrangement forms a linear structure with alternating A and B poles connected by '1'.

Step 2

Connect poles (part 2, 10 pieces) and (part 3, 10 pieces) using item 1.

Diagram shows connecting two different types of poles (labeled 2 and 3) into a central connector piece labeled '1'. The arrangement shows a linear connection of these poles.

Step 3

Assemble the frame structure using poles (part 1) and connectors (parts 2 and 3).

Diagram illustrates the assembly of a triangular frame structure using multiple pole connectors (labeled 1, 2, 3) to create a rigid framework. Multiple such connections are shown.

Step 4

Attach fasteners. Use 1 piece of item 'e' and 84 pieces of item 'a'.

Note: Fasteners marked in red are the same as used in Step 4. Poles marked in red can be temporarily secured first. The same fasteners are used to secure the cover cloth during Step 9.

Diagram shows the frame structure from Step 3. It indicates where to attach fasteners. Specifically, it shows attaching a fastener (labeled 'e') to a pole connection point. Another diagram shows attaching multiple fasteners (labeled 'a') to various connection points on the frame.

Step 5

Attach poles (part 4, 3 pieces) and (part 5, 2 pieces) to the frame.

Diagram shows a person attaching poles labeled '4' and '5' to the existing frame structure. The connections are made at specific points on the frame. Close-up diagrams show how poles '4' or '5' connect to the frame.

Step 6

Attach poles (part 4, 3 pieces) and (part 5, 2 pieces) to form the roof structure.

Diagram shows people attaching poles labeled '4' and '5' to the frame to create the roof structure of the tent. Close-up diagrams illustrate the connection points for poles '4' or '5'.

Step 7

Attach poles (part 1, 8 pieces), (part 6, 2 pieces), (part 7, 4 pieces), and connectors (F, 6 pieces; G, 4 pieces) to form the tent perimeter.

Diagram shows the tent frame from a top-down perspective. It illustrates attaching poles (1, 6, 7) and connectors (F, G) along the perimeter of the tent base. Close-up diagrams show specific connection methods using these parts.

Step 8

Secure the base of the tent to the ground using items (1), (5), (4), (7), (6).

Diagram shows the tent structure with the base poles. It illustrates anchoring the tent to the ground using ground stakes (labeled 1, 5, 4, 7, 6) at various points around the base. Close-up diagrams show how these stakes are inserted into the ground and connected to the tent poles.

Step 9

Attach the cover cloth using fasteners: item 'a' (56 pieces), item 'f' (2 pieces), item 'g' (2 pieces).

Fastener Notes:

Fasteners marked in red are the same ones used in Step 4.
4 bungee cord fasteners are needed for part 4 (marked in blue).
12 bungee cord fasteners are needed for part 5 (marked in yellow).
8 bungee cord fasteners are needed for parts 6 & 7 (marked in green).

Diagram shows the assembled tent frame. It illustrates attaching the cover cloth to the frame using various fasteners. Close-up diagrams highlight specific fasteners (labeled 'a') and their connection points, as well as other fasteners (labeled 'f', 'g') used for securing the cover.

Step 10

Make final connections using poles (part 3) and fasteners (item 'b', 20 pieces; item 'c', 8 pieces; item 'd', 8 pieces).

Diagram shows the tent structure from the side and top. It illustrates final pole connections (labeled 3) and the use of various fasteners (labeled b, c, d) to secure the structure. Close-up diagrams show specific connection details with different fastener types and pole diameters (Φ3, Φ6).

Step 11

Ensure proper anchoring for wind resistance.

For Grassy Surfaces: Use ground nails (item 'm').

For Cement Surfaces: Use expansion screws (item 'm').

Note: To improve wind resistance, complete this installation step. If expansion screws or ground nails are not installed, strong winds may topple the gazebo. Expansion screws are essential for stability on cement surfaces, and ground nails are for grassy surfaces. All are included in the accessories package.

Diagrams show correct and incorrect anchoring methods for both grassy and cement surfaces. For grassy surfaces, it shows ground nails being inserted. For cement surfaces, it shows expansion screws being used. Incorrect methods are marked with 'X'.

Step 12

[Complete Installation]

Diagram shows the fully assembled 20x30 ft party tent.

	YITAHOME 20x40 FT Party Tent Assembly Instructions Comprehensive assembly instructions for the YITAHOME 20x40 FT Party Tent (Model YZZW-V3), detailing parts, warnings, and step-by-step guidance for secure installation.
	Yitahome Gazebo Assembly Instructions: FTPLCG-2199, FTPLCG-2200, FTPLCG-2201, FTPLCG-2202 Comprehensive assembly guide for Yitahome outdoor party tents and gazebos (models FTPLCG-2199, FTPLCG-2200, FTPLCG-2201, FTPLCG-2202). Includes parts list, safety warnings, and step-by-step instructions for proper setup and stability.
	YITAHOME 10x10 FT Hardtop Gazebo Assembly Instructions (LHHY-V 3) Detailed assembly instructions for the YITAHOME 10x10 FT Hardtop Gazebo (Model LHHY-V 3), including parts list, step-by-step guide, and safety warnings.
	YITAHOME 20x40 FT Canopy Tent Assembly Instructions (NBQF-V 2) Detailed assembly instructions for the YITAHOME 20x40 FT Canopy Tent (Model NBQF-V 2), including parts list, step-by-step guidance, and important safety information.
	YITAHOME 12x16 FT Hardtop Gazebo Assembly Instructions Comprehensive assembly guide for the YITAHOME 12x16 FT Hardtop Gazebo (Model LHHY-V 2), including parts list, step-by-step instructions, and safety warnings. Features model numbers FTPLCG-0158, FTPLCG-0274, FTPLCG-0159, FTPLCG-0275, FTPLCG-0160, FTPLCG-0276.
	Yitahome LHHY-V1 Hardtop Gazebo Assembly Instructions Comprehensive assembly instructions for the Yitahome LHHY-V1 Hardtop Gazebo (Model FTPLCG-0355-0359). Includes parts list and step-by-step guidance for safe and proper installation.
	YITAHOME TZBTCS-V1 12x18 FT Hardtop Gazebo Assembly Instructions Comprehensive assembly instructions for the YITAHOME TZBTCS-V1 12x18 FT Hardtop Gazebo, detailing parts, warnings, and step-by-step guidance for a secure and proper setup.
	YITAHOME 12x20 FT Hardtop Gazebo Assembly Instructions This document provides comprehensive assembly instructions for the YITAHOME 12x20 FT Hardtop Gazebo, including safety warnings, part lists, and assembly steps. It guides users through the process of setting up their gazebo for optimal use and stability.