Avantree TWS116 True Wireless Earphones User Manual
This manual provides comprehensive instructions for using the Avantree TWS116 True Wireless Earphones for TV.
Product Overview
The Avantree TWS116 are True Wireless Earphones designed for TV use. The product includes two earbuds and a charging case.
Key Components:
- [1] Multifunction Buttons: Located on each earbud for control.
- [2] LED Indicators: Provide status information on both earbuds and the charging case.
- [3] USB-C Charging Port: Located on the charging case for power input.
- [4] Battery Indicator: Displays the charging status of the case.
How to Wear
Follow these steps to correctly wear the earphones:
- [Figure 1]: Position the earphone near your ear.
- [Figure 2]: Insert the earphone gently into your ear canal.
- [Figure 3]: Adjust for a secure and comfortable fit.
How to Charge
Charging the Earbuds
Place the earbuds into the charging case. The LED indicators on the earbuds will show their charging status (typically red while charging). The earbuds take approximately 2.5 hours to fully charge. The LED indicators will turn off once charging is complete.
Charging the Case
Connect the charging case to a power source using a USB-C cable (DC 5V / 0.5-2A). This can be a computer USB port or a compatible power adapter. The battery indicator on the case will show its charging status. The case will automatically turn off when fully charged.
Basic Operations
| Function | Operation |
|---|---|
| Power On | Remove earphones from the charging case; they will power on automatically. OR From off status, long press the multifunction button [1] for about 3 seconds. |
| Power Off | Put the earphones back into the charging case; they will power off and begin charging. OR Double-click the multifunction button [1] and hold for about 3 seconds until the indicators dim out. |
| Pairing | Remove earphones from the case. OR From off status, press and hold the multifunction button [1] for about 3 seconds. One earphone will enter PAIRING MODE with the indicator flashing BLUE and RED. |
| Play / Pause | Click the multifunction button [1] once on either side. |
| Volume up / down | Press and hold the multifunction button [1] on either earphone. |
| Previous / next track | Double-click the multifunction button [1] on either earphone. |
| Answer/end a call | Click the multifunction button [1] once on either earphone. |
| Activate Siri / Google Assistant (Phone dependent) | Triple-click the multifunction button [1] on either earphone. |
LED Indications
Earphones
| Status | LED Indicator | Voice Prompt |
|---|---|---|
| Power on | Flash BLUE for about 1s | Power on |
| Power off | Flash RED for about 1s, then turns off | Power off |
| Ready to pair | One earphone flashes BLUE & RED | Pairing |
| Connected | Both earphones' LEDs flash BLUE once every 8s | Your headset is connected |
| Not connected with phone | One earphone flashes BLUE once every 8s, while the other flashes BLUE & RED | Disconnected |
| Earphones Not connected with each other | Both earphones flash BLUE & RED | NA |
| Low battery | Triple-Flash RED every 5 mins | Battery low |
| Charging | SOLID RED | NA |
| Fully charged | Both earphones' Indicators dim out | NA |
Charging Case
| Status | LED Indicator |
|---|---|
| Battery low | SOLID BLUE |
| Charging | SOLID RED |
| Fully charged | Indicator dimmed out |
How to Pair
How to use with Mobile Device / PC
For first use:
- Place both earphones into the charging case.
- Remove BOTH earphones to turn them ON.
- Wait for the LED on ONE of the earphones to flash BLUE & RED, indicating PAIRING MODE.
- Search and select 'Avantree TWS116' from the Bluetooth menu on your device to connect. The screenshots show the process of connecting via Bluetooth on a mobile device. The first shows the device searching for Bluetooth devices, listing 'Avantree TWS116' as available. The second shows 'Avantree TWS116' as connected.
- Once connected, the flashing on both earphones will slow down significantly.
Notes:
- For use with a PC, ensure Avantree TWS116 is set as the default output and input device. Refer to specific guides for Windows PC or MacBook if needed.
Reconnecting:
The earphones will automatically reconnect to your most recently paired device when removed from the case. If they do not reconnect automatically, select 'Avantree TWS116' on your device to manually reconnect.
Note: To connect with another device, please turn off Bluetooth on the previously connected device.
How to use with TV
For instructions on how to use the TWS116 with your TV, please refer to the Avantree FAQ:
https://avantree.com/product-support/BTHS-AS90P-BLK-X?k=AS90T#general-headphones-use-with-television
Mono (Single) Earbud Use
Either earbud can be used independently. To use a single earbud:
- Follow the pairing section above to pair both earbuds to your device first.
- Place both earbuds back into the charging case.
- Take out the earbud you wish to use; it will automatically reconnect to your device.
How to Factory Reset
- Power off both earphones manually: double-click the multifunction button [1] and hold for about 3 seconds until the LED lights up RED for about 1 second, then turns off.
- Take one earphone, press and hold its multifunction button [1] for about 10 seconds. Do not release until the indicator turns PINK. It will power off immediately after.
- Place the reset earphone back into the charging case.
- Take the other earphone and repeat steps 2 and 3.
- Connect the two earphones: Remove both earphones from the case. The LEDs on both will flash BLUE & RED, indicating they are connecting with each other.
- Once connected, the indicator on one earphone will switch to flashing BLUE, while the other continues flashing BLUE & RED alternately. You can now pair with your device again.
Note: Before pairing again, please delete 'Avantree TWS116' from your device's Bluetooth list.
Support
FAQ
View frequently asked questions on the Avantree website:
https://avantree.com/product-support/BTHS-TWS116-BLK
How to take care of your TWS116
- Always store the earbuds inside the charging case and ensure they are safely protected.
- The TWS116 is designed to function optimally between temperatures of 0°C and 40°C (32-100°F). Performance may be impaired if used outside this range.
- Avoid storing the earbuds for extended periods (maximum three months) without recharging them.
- The charging case is designed to charge using standard USB voltage (5V ± 0.25V). Charging with higher voltage power supplies/sources is not recommended.
