Innovair SIM2X Side Discharge Heat Pump System

Submittal Data Sheet

SIM2X Side Discharge Heat Pump System

Location:

Engineer:

Submitted to:

Submitted by:

Reference:

18K Model

Set Model
Outdoor unit modelSEV18H2R19
Indoor unit modelDEV18H2R19

System Performance Data

Power supply: 208/230V, 1Ph, 60Hz

Normal Operational Voltage Range: 187-253V

Electrical

Minimum circuit ampacity: 16.0A

Max. fuse: 20.0A

Connection wiring: 14AWG*2 Stranded, shielded

Cooling

ParameterValue
Rated Capacity (Btu/h)18000
Capacity Range (Btu/h)5350-18700
Power Input (W)1620
Rated current (A)7.5
SEER (Btu/W)19
EER (Btu/W)11.1

Heating at 47F

ParameterValue
Rated Capacity (Btu/h)18000
Capacity Range (Btu/h)5600-18700
Power Input (W)1510
Rated current (A)6.7
HSPF4 (Btu/W)10.8
HSPF5 (Btu/W)8.8
COP (W/W)3.49

Refrigerant Pipe Data

ParameterDetails
Throttle typeIndoor unit: EEV for cooling; Outdoor unit: EEV for heating
Design pressure (PSIG)550/340
Refrigerant TypeR410A
Refrigerant precharge (Oz)56.44
Refrigerant precharge (ft)25.0
Refrigerant precharge (m)7.5
Additional charge per ft (oz/ft)0.69
Additional charge per m (g/m)65
Liquid side/Gas side (inch)3/8" / 3/4"
Liquid side/Gas side (mm)9.52/19
Max. pipe length (ft)98.0
Max. pipe length (m)30
Max. difference in level (ft)66.0
Max. difference in level (m)20
Connection methodFlared
Indoor Operating Temp (Cooling/Heating)60~90°F / 32~86°F (16~32°C / 0~30°C)
Outdoor Operating Temp (Cooling/Heating)5-122°F / 5-75°F (-15~50°C / -15~24°C)

Indoor Unit Data

Indoor fan motor
ParameterDetails
TypeCentrifugal
ModelZKFD-250-8-1
Qty1
Input (W)67.8
Speed (Hi/Med/Lo) (r/min)576.47 / 529.41 / 488.24
Air flow & Noise levelIndoor air flow (Hi/Med/Lo): 576.47 / 529.41 / 488.24 CFM
Indoor noise level (Hi/Med/Lo): 36 / 34 / 32 dB(A)
Dimension (WxDxH) (inch)21.02 x 17.52 x 45.00
Dimension (WxDxH) (mm)534 x 445 x 1143
Net/Gross weight (lbs.)48 / 58.7
Net/Gross weight (kg)105.82 / 129.41

Outdoor Unit Data

Compressor
ParameterDetails
TypeROTARY
ModelKSN140D21UFZ
BrandGMCC
Capacity (Btu/h)14415.7
Input (W)1085
Refrigerant oil/oil charge (ml)VG74/440
Outdoor fan motor
ParameterDetails
ModelZKFN-34-10-1-3
Qty1
Input (W)100.30
Speed (r/min)840 / 700 / 650
Air flow & Noise levelOutdoor air flow (Max.): 1450.00 CFM
Outdoor noise level: 31.69 dB(A)
Dimension (W×D×H) (inch)32.1 x 12.99 x 21.81
Dimension (W×D×H) (mm)815 x 330 x 554
Net/Gross weight (lbs.)75.84 / 81.35
Net/Gross weight (kg)34.4 / 36.9

24K Model

Set Model
Outdoor unit modelSEV24H2R19
Indoor unit modelDEV24H2R19

Certified: AHRI, UL

System Performance Data

Power supply: 208/230V, 1Ph, 60Hz

Normal Operational Voltage Range: 187-253V

Electrical

Minimum circuit ampacity: 20.0A

Max. fuse: 30.0A

Connection wiring: 14AWG*2 Stranded, shielded

Cooling

ParameterValue
Rated Capacity (Btu/h)24000
Capacity Range (Btu/h)7500-26000
Power Input (W)2120
Rated current (A)9.7
SEER (Btu/W)19.4
EER (Btu/W)11.3

Heating at 47F

ParameterValue
Rated Capacity (Btu/h)26000
Capacity Range (Btu/h)5600-30000
Power Input (W)2150
Rated current (A)9.8
HSPF4 (Btu/W)11.3
HSPF5 (Btu/W)9.2
COP (W/W)3.54

Refrigerant Pipe Data

ParameterDetails
Throttle typeIndoor unit: EEV for cooling; Outdoor unit: EEV for heating
Refrigerant TypeR410A
Refrigerant precharge (Oz)75.0
Refrigerant precharge (ft)25.0
Refrigerant precharge (m)7.5
Additional charge per ft (oz/ft)0.69
Additional charge per m (g/m)65
Liquid side/Gas side (inch)3/8" / 3/4"
Liquid side/Gas side (mm)9.52/19
Max. pipe length (ft)164.0
Max. pipe length (m)50
Max. difference in level (ft)82.0
Max. difference in level (m)25
Connection methodFlared
Indoor Operating Temp (Cooling/Heating)60~90°F / 32~86°F (16~32°C / 0~30°C)
Outdoor Operating Temp (Cooling/Heating)5-122°F / 5-75°F (-15~50°C / -15~24°C)
Application area (sq.ft)344.44 - 505.90
Application area (m2)32 - 47

Indoor Unit Data

Indoor fan motor
ParameterDetails
TypeCentrifugal
ModelZKFD-250-8-1
Qty1
Input (W)67.8
Air flow & Noise levelIndoor air flow (Hi/Med/Lo): 758.82 / 694.12 / 629.41 CFM
Indoor noise level (Hi/Med/Lo): 43 / 40.5 / 35 dB(A)
Dimension (WxDxH) (inch)21.02 x 17.52 x 45.00
Dimension (WxDxH) (mm)534 x 445 x 1143
Net/Gross weight (lbs.)47.9 / 57.8
Net/Gross weight (kg)105.60 / 127.43

Outdoor Unit Data

Compressor
ParameterDetails
TypeTwin-ROTARY
ModelKTM240D57UMT
BrandGMCC
Capacity (Btu/h)24686
Input (W)1945
Refrigerant oil/oil charge (ml)VG74/670
Outdoor fan motor
ParameterDetails
ModelZKFN-80-8-3
Qty1
Input (W)88.00
Speed (r/min)810/720
Air flow & Noise levelOutdoor air flow (Max.): 1764.71 CFM
Outdoor noise level: 56.5 dB(A)
Dimension (W×D×H) (inch)35.04 x 13.46 x 26.50
Dimension (W×D×H) (mm)890 x 342 x 673
Net/Gross weight (lbs.)102.29 / 109.13
Net/Gross weight (kg)46.4 / 49.5

30K Model

Set Model
Outdoor unit modelSEV30H2R19
Indoor unit modelDEV30H2R19

Certified: AHRI, UL

System Performance Data

Power supply: 208/230V, 1Ph, 60Hz

Normal Operational Voltage Range: 187-253V

Electrical

Minimum circuit ampacity: 20.0A

Max. fuse: 35.0A

Connection wiring: 14AWG*2 Stranded, shielded

Cooling

ParameterValue
Rated Capacity (Btu/h)30000
Capacity Range (Btu/h)9482-33000
Power Input (W)2760
Rated current (A)12.20
SEER (Btu/W)19.5
EER (Btu/W)10.9

Heating at 47F

ParameterValue
Rated Capacity (Btu/h)31000
Capacity Range (Btu/h)12200-32000
Power Input (W)2850
Rated current (A)12.40
HSPF4 (Btu/W)10.3
HSPF5 (Btu/W)8.6
COP (W/W)3.19

Refrigerant Pipe Data

ParameterDetails
Throttle typeIndoor unit: EEV for cooling; Outdoor unit: EEV for heating
Design pressure (PSIG)550/340
Refrigerant TypeR410A
Refrigerant precharge (Oz)107.59
Refrigerant precharge (ft)25.0
Refrigerant precharge (m)7.5
Additional charge per ft (oz/ft)0.69
Additional charge per m (g/m)65
Liquid side/Gas side (inch)3/8" / 3/4"
Liquid side/Gas side (mm)9.52/19
Max. pipe length (ft)213.0
Max. pipe length (m)65
Max. difference in level (ft)98.0
Max. difference in level (m)30
Connection methodFlared
Indoor Operating Temp (Cooling/Heating)60~90°F / 32~86°F (16~32°C / 0~30°C)
Outdoor Operating Temp (Cooling/Heating)5-122°F / 5-75°F (-15~50°C / -15~24°C)
Application area (sq.ft)430.56 - 635.07
Application area (m2)40 - 59

Indoor Unit Data

Indoor fan motor
ParameterDetails
TypeCentrifugal
ModelZKFD-250-8-1
Qty1
Input (W)67.8
Air flow & Noise levelIndoor air flow (Hi/Med/Lo): 1143 CFM
Indoor noise level (Hi/Med/Lo): 45 dB(A)
Dimension (WxDxH) (inch)21.02 x 17.52 x 45.00
Dimension (WxDxH) (mm)534 x 445 x 1143
Net/Gross weight (lbs.)47.9 / 57.8
Net/Gross weight (kg)105.60 / 127.43

Outdoor Unit Data

Compressor
ParameterDetails
TypeROTARY
ModelKTF250D22UMT
BrandGMCC
Capacity (Btu/h)26064.74
Input (W)2080
Refrigerant oil/oil charge (ml)VG74/670
Outdoor fan motor
ParameterDetails
ModelZKFN-120-8-2
Qty1
Input (W)150.0
Speed (r/min)1150/1050/900/850
Air flow & Noise levelOutdoor air flow (Max.): 2235.29 CFM
Outdoor noise level: 61 dB(A)
Dimension (W×D×H) (inch)37.24 x 16.14 x 31.89
Dimension (W×D×H) (mm)946 x 410 x 810
Net/Gross weight (lbs.)151.68 / 161.16
Net/Gross weight (kg)68.8 / 73.1

36K Model

Set Model
Outdoor unit modelSEV36H2R19
Indoor unit modelDEV36H2R19

Certified: AHRI, UL

System Performance Data

Power supply: 208/230V, 1Ph, 60Hz

Normal Operational Voltage Range: 187-253V

Electrical

Minimum circuit ampacity: 24.0A

Max. fuse: 40.0A

Connection wiring: 14AWG*2 Stranded, shielded

Cooling

ParameterValue
Rated Capacity (Btu/h)36000
Capacity Range (Btu/h)7700-38900
Power Input (W)3750
Rated current (A)15.82
SEER (Btu/W)18
EER (Btu/W)10.4

Heating at 47F

ParameterValue
Rated Capacity (Btu/h)36000
Capacity Range (Btu/h)6000-36400
Power Input (W)3496
Rated current (A)16.12
HSPF4 (Btu/W)9.1
HSPF5 (Btu/W)7.1
COP (W/W)3.02

Refrigerant Pipe Data

ParameterDetails
Throttle typeIndoor unit: EEV for cooling; Outdoor unit: EEV for heating
Design pressure (PSIG)550/340
Refrigerant TypeR410A
Refrigerant precharge (Oz)130.51
Refrigerant precharge (ft)25.0
Refrigerant precharge (m)7.5
Additional charge per ft (oz/ft)0.69
Additional charge per m (g/m)65
Liquid side/Gas side (inch)3/8" / 3/4"
Liquid side/Gas side (mm)9.52/19
Max. pipe length (ft)213.0
Max. pipe length (m)65
Max. difference in level (ft)98.0
Max. difference in level (m)30
Connection methodFlared
Indoor Operating Temp (Cooling/Heating)60~90°F / 32~86°F (16~32°C / 0~30°C)
Outdoor Operating Temp (Cooling/Heating)5-122°F / 5-75°F (-15~50°C / -15~24°C)
Application area (sq.ft)516.67 - 753.47
Application area (m2)48 - 70

Indoor Unit Data

Indoor fan motor
ParameterDetails
TypeCentrifugal
ModelZKFD-375-8-1
Qty1
Input (W)168.0
Air flow & Noise levelIndoor air flow (Hi/Med/Lo): 1082.35 / 970.59 / 864.71 CFM
Indoor noise level (Hi/Med/Lo): 46.8 / 44 / 41.3 dB(A)
Dimension (WxDxH) (inch)21.02 x 21.02 x 49.02
Dimension (WxDxH) (mm)534 x 534 x 1245
Net/Gross weight (lbs.)58.6 / 70.6
Net/Gross weight (kg)129.19 / 155.64

Outdoor Unit Data

Compressor
ParameterDetails
TypeROTARY
ModelKTF250D22UMT
BrandGMCC
Capacity (Btu/h)26064.74
Input (W)2080
Refrigerant oil/oil charge (ml)VG74/670
Outdoor fan motor
ParameterDetails
ModelZKFN-120-8-2
Qty1
Input (W)150.0
Speed (r/min)1150/1050/900/850
Air flow & Noise levelOutdoor air flow (Max.): 2235.29 CFM
Outdoor noise level: 61 dB(A)
Dimension (W×D×H) (inch)37.24 x 16.14 x 31.89
Dimension (W×D×H) (mm)946 x 410 x 810
Net/Gross weight (lbs.)151.68 / 161.16
Net/Gross weight (kg)68.8 / 73.1

48K Model

Set Model
Outdoor unit modelSEV48H2R19
Indoor unit modelDEV48H2R19

Certified: AHRI, UL

System Performance Data

Power supply: 208/230V, 1Ph, 60Hz

Normal Operational Voltage Range: 187-253V

Electrical

Minimum circuit ampacity: 34.0A

Max. fuse: 50.0A

Connection wiring: 14AWG*2 Stranded, shielded

Cooling

ParameterValue
Rated Capacity (Btu/h)47000
Capacity Range (Btu/h)10500-48000
Power Input (W)5046
Rated current (A)21.9
SEER (Btu/W)17.3
EER (Btu/W)9.3

Heating at 47F

ParameterValue
Rated Capacity (Btu/h)55000
Capacity Range (Btu/h)11700-57000
Power Input (W)5373
Rated current (A)23.3
HSPF4 (Btu/W)10
HSPF5 (Btu/W)8.2
COP (W/W)3.00

Refrigerant Pipe Data

ParameterDetails
Throttle typeIndoor unit: EEV for cooling; Outdoor unit: EEV for heating
Design pressure (PSIG)550/340
Refrigerant TypeR410A
Refrigerant precharge (Oz)165.79
Refrigerant precharge (ft)25.0
Refrigerant precharge (m)7.5
Additional charge per ft (oz/ft)0.69
Additional charge per m (g/m)65
Liquid side/Gas side (inch)3/8" / 3/4"
Liquid side/Gas side (mm)9.52/19
Max. pipe length (ft)213.0
Max. pipe length (m)65
Max. difference in level (ft)98.0
Max. difference in level (m)30
Connection methodFlared
Indoor Operating Temp (Cooling/Heating)60~90°F / 32~86°F (16~32°C / 0~30°C)
Outdoor Operating Temp (Cooling/Heating)5-122°F / 5-75°F (-15~50°C / -15~24°C)
Application area (sq.ft)688.89 - 1011.81
Application area (m2)64 - 94

Indoor Unit Data

Indoor fan motor
ParameterDetails
TypeCentrifugal
ModelZKFD-750-8-1
Qty1
Input (W)286.5
Air flow & Noise levelIndoor air flow (Hi/Med/Lo): 1582.35 / 1358.82 / 1135.29 CFM
Indoor noise level (Hi/Med/Lo): 52.5 / 49 / 44 dB(A)
Dimension (WxDxH) (inch)21.02 x 24.49 x 52.99
Dimension (WxDxH) (mm)534 x 622 x 1346
Net/Gross weight (lbs.)73.8 / 86.5
Net/Gross weight (kg)162.70 / 190.70

Outdoor Unit Data

Compressor
ParameterDetails
TypeROTARY
ModelKTQ420D1UMU
BrandGMCC
Capacity (Btu/h)44697
Input (W)3420
Refrigerant oil/oil charge (ml)VG74/1400
Outdoor fan motor
ParameterDetails
ModelZKFN-85-8-22-5
Qty1
Input (W)126.0
Speed (r/min)900 / 850 / 650
Air flow & Noise levelOutdoor air flow (Max.): 4411.76 CFM
Outdoor noise level: 52.5 dB(A)
Dimension (W×D×H) (inch)37.48 x 16.34 x 52.48
Dimension (W×D×H) (mm)952 x 415 x 1333
Net/Gross weight (lbs.)217.15 / 348.46
Net/Gross weight (kg)98.5 / 112.7

60K Model

Set Model
Outdoor unit modelSEV60H2R19
Indoor unit modelDEV60H2R19

Certified: AHRI, UL

System Performance Data

Power supply: 208/230V, 1Ph, 60Hz

Normal Operational Voltage Range: 187-253V

Electrical

Minimum circuit ampacity: 34.0A

Max. fuse: 60.0A

Connection wiring: 14AWG*2 Stranded, shielded

Cooling

ParameterValue
Rated Capacity (Btu/h)57000
Capacity Range (Btu/h)4395-60200
Power Input (W)5644
Rated current (A)23.8
SEER (Btu/W)18
EER (Btu/W)10.3

Heating at 47F

ParameterValue
Rated Capacity (Btu/h)60000
Capacity Range (Btu/h)11400-63100
Power Input (W)4959
Rated current (A)20.9
HSPF4 (Btu/W)9.2
HSPF5 (Btu/W)7.6
COP (W/W)3.55

Refrigerant Pipe Data

ParameterDetails
Throttle typeIndoor unit: EEV for cooling; Outdoor unit: EEV for heating
Design pressure (PSIG)550/340
Refrigerant TypeR410A
Refrigerant precharge (Oz)172.84
Refrigerant precharge (ft)25.0
Refrigerant precharge (m)7.5
Additional charge per ft (oz/ft)0.69
Additional charge per m (g/m)65
Liquid side/Gas side (inch)3/8" / 7/8"
Liquid side/Gas side (mm)9.52 / 22
Max. pipe length (ft)213.0
Max. pipe length (m)65
Max. difference in level (ft)98.0
Max. difference in level (m)30
Connection methodFlared
Indoor Operating Temp (Cooling/Heating)60~90°F / 32~86°F (16~32°C / 0~30°C)
Outdoor Operating Temp (Cooling/Heating)5-122°F / 5-75°F (-15~50°C / -15~24°C)
Application area (sq.ft)818.06 - 1194.79
Application area (m2)76 - 111

Indoor Unit Data

Indoor fan motor
ParameterDetails
TypeCentrifugal
ModelZKFD-750-8-1
Qty1
Input (W)286.5
Air flow & Noise levelIndoor air flow (Hi/Med/Lo): 1582.35 / 1358.82 / 1135.29 CFM
Indoor noise level (Hi/Med/Lo): 52.5 / 49 / 44 dB(A)
Dimension (WxDxH) (inch)21.02 x 24.49 x 52.99
Dimension (WxDxH) (mm)534 x 622 x 1346
Net/Gross weight (lbs.)73.8 / 86.5
Net/Gross weight (kg)162.70 / 190.70

Outdoor Unit Data

Compressor
ParameterDetails
TypeROTARY
ModelKTQ420D1UMU
BrandGMCC
Capacity (Btu/h)44697
Input (W)3420
Refrigerant oil/oil charge (ml)VG74/1400
Outdoor fan motor
ParameterDetails
ModelZKFN-85-8-22-5
Qty1
Input (W)126.0
Speed (r/min)900 / 850 / 650
Air flow & Noise levelOutdoor air flow (Max.): 4411.76 CFM
Outdoor noise level: 52.5 dB(A)
Dimension (W×D×H) (inch)37.48 x 16.34 x 52.48
Dimension (W×D×H) (mm)952 x 415 x 1333
Net/Gross weight (lbs.)217.15 / 348.46
Net/Gross weight (kg)98.5 / 112.7

PDF preview unavailable. Download the PDF instead.

Innovair-SLIM24-Regular-AIr-Handler-Submittals-12.23 PDFTron PDFNet, V7.10741.

Related Documents

Preview Innovair A-COIL Heat Pump System Submittal Data Sheets
Comprehensive submittal data sheets for Innovair A-COIL Heat Pump Systems, detailing specifications for cooling and heating capacities, electrical requirements, refrigerant pipe data, and unit dimensions across multiple models including SEV18H2R19, SEV24H2R19, SEV30H2R19, SEV36H2R19, SEV48H2R19, and SEV60H2R19.
Preview Innovair SLIM24 Central Heat Pump Condensing Units Limited Warranty
Detailed limited warranty information for Innovair SLIM24 Central Heat Pump Condensing Units, covering residential and commercial applications, terms, conditions, exclusions, and arbitration.
Preview INNOVAIR DEV Series Heat Pump & Air Conditioner AHRI Certified Ratings
Comprehensive AHRI certified product ratings for INNOVAIR DEV Series split system heat pumps and air conditioners, detailing SEER, EER, HSPF, and model specifications for both 2017 and 2023 standards.
Preview Innovair SLIM4 Heat Pump Series Submittal Data Sheets
Comprehensive submittal data sheets for Innovair's SLIM4 Heat Pump Series, detailing specifications, efficiency ratings, performance data, electrical requirements, and dimensions for models SOV18H2BA, SWV18BDA, SOV24H2BA, SWV24BDA, SOV30H2BA, SWV30BDA, SOV36H2BA, and SWV36BDA.
Preview Innovair SLIM4 Hyper Heat Pump Series Submittal Data Sheet
Comprehensive submittal data sheet for the Innovair SLIM4 Hyper Heat Pump Series, detailing specifications, performance metrics, electrical requirements, piping details, and dimensional data for models SHV18H2BA/SAV18BDA through SHV60H2BA/SAV60BDA. Includes cooling and heating performance at various conditions, indoor and outdoor unit specifications, and installation clearance guidelines.
Preview Innovair SLIM4 Heat Pump Series Submittal Data Sheet
This document provides detailed submittal data for the Innovair SLIM4 Heat Pump Series, covering specifications, performance metrics, dimensional information, and features for models ranging from 18,000 to 60,000 BTU/hr.
Preview Innovair GAV Series Indoor Unit Installer's Guide - Safety, Installation, and Specifications
Comprehensive installer's guide for Innovair GAV Series indoor air handler units (GAV24B2A, GAV36B2A, GAV48B2A, GAV60B2A). Covers installation, safety precautions, electrical wiring, airflow performance, ductwork, refrigerant pipe connection, maintenance, and wiring diagrams for R454B refrigerant systems.
Preview Innovair SLIM24 High Efficiency Heat Pump System: Installation and Owner's Manual
Comprehensive guide for installing and operating the Innovair SLIM24 High Efficiency Heat Pump System, covering safety precautions, maintenance, and troubleshooting for optimal performance.